Dielectric Loss Calculator

✖Voltage is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.ⓘ Voltage [V]			+10% -10%
✖Capacitive Reactance is the measure of the opposition to alternating current by the capacitor.ⓘ Capacitive Reactance [X_c]			+10% -10%
✖Phase Difference is the time interval by which a wave leads by or lags by another wave.ⓘ Phase Difference [Φ]			+10% -10%

✖Power Loss is the amount of power lost during the heating.ⓘ Dielectric Loss [P_l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Electric Heating Formulas PDF PDF Image

Dielectric Loss Solution

STEP 0: Pre-Calculation Summary

Formula Used

Power Loss = Voltage^2/(2*Capacitive Reactance)*sin(2*Phase Difference)
P_l = V^2/(2*X_c)*sin(2*Φ)
This formula uses 1 Functions, 4 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Power Loss - (Measured in Watt) - Power Loss is the amount of power lost during the heating.
Voltage - (Measured in Volt) - Voltage is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
Capacitive Reactance - (Measured in Ohm) - Capacitive Reactance is the measure of the opposition to alternating current by the capacitor.
Phase Difference - (Measured in Radian) - Phase Difference is the time interval by which a wave leads by or lags by another wave.

STEP 1: Convert Input(s) to Base Unit

Voltage: 200 Volt --> 200 Volt No Conversion Required
Capacitive Reactance: 380 Ohm --> 380 Ohm No Conversion Required
Phase Difference: 60 Degree --> 1.0471975511964 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_l = V^2/(2*X_c)*sin(2*Φ) --> 200^2/(2*380)*sin(2*1.0471975511964)

Evaluating ... ...

P_l = 45.5802844097177

STEP 3: Convert Result to Output's Unit

45.5802844097177 Watt -->45.5802844097177 Volt Ampere (Check conversion here)

FINAL ANSWER

45.5802844097177 ≈ 45.58028 Volt Ampere <-- Power Loss

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Utilization of Electrical Energy » Electric Heating » Dielectric Heating » Dielectric Loss

Credits

Created by Nisarg

Indian Institute of Technology,Roorlee (IITR), Roorkee

Nisarg has created this Calculator and 100+ more calculators!

Verified by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has verified this Calculator and 500+ more calculators!

< Dielectric Heating Calculators

Dielectric Loss

LaTeX Go Power Loss = Voltage^2/(2*Capacitive Reactance)*sin(2*Phase Difference)

Power Loss Density

LaTeX Go Power Density = Frequency*Complex Relative Permittivity*8.85418782*10^-12*Electric Field Strength^2

Net Resistance

LaTeX Go Resistance = Capacitive Reactance/Loss Tangent

Loss Tangent

LaTeX Go Loss Tangent = Capacitive Reactance/Resistance

Dielectric Loss Formula

LaTeX Go

Power Loss = Voltage^2/(2*Capacitive Reactance)*sin(2*Phase Difference)
P_l = V^2/(2*X_c)*sin(2*Φ)

What is the difference between real power and reactive power?

Real Power is equal to the Reactive Power i.e. there is no VAr in DC Circuits. Only Real Power exists. There is no Reactive Power in DC circuits due to the zero phase angle (Φ) between current and voltage. Real power is important to produce heat and utilize the electric and magnetic field generated by Reactive Power.

How to Calculate Dielectric Loss?

Dielectric Loss calculator uses Power Loss = Voltage^2/(2*Capacitive Reactance)*sin(2*Phase Difference) to calculate the Power Loss, The Dielectric Loss formula is defined as the difference between the input and output power of a device, apparatus, pump set, or process. Power Loss is denoted by P_l symbol.

How to calculate Dielectric Loss using this online calculator? To use this online calculator for Dielectric Loss, enter Voltage (V), Capacitive Reactance (X_c) & Phase Difference (Φ) and hit the calculate button. Here is how the Dielectric Loss calculation can be explained with given input values -> 45.58028 = 200^2/(2*380)*sin(2*1.0471975511964).

FAQ

What is Dielectric Loss?

The Dielectric Loss formula is defined as the difference between the input and output power of a device, apparatus, pump set, or process and is represented as P_l = V^2/(2*X_c)*sin(2*Φ) or Power Loss = Voltage^2/(2*Capacitive Reactance)*sin(2*Phase Difference). Voltage is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light, Capacitive Reactance is the measure of the opposition to alternating current by the capacitor & Phase Difference is the time interval by which a wave leads by or lags by another wave.

How to calculate Dielectric Loss?

The Dielectric Loss formula is defined as the difference between the input and output power of a device, apparatus, pump set, or process is calculated using Power Loss = Voltage^2/(2*Capacitive Reactance)*sin(2*Phase Difference). To calculate Dielectric Loss, you need Voltage (V), Capacitive Reactance (X_c) & Phase Difference (Φ). With our tool, you need to enter the respective value for Voltage, Capacitive Reactance & Phase Difference and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search