Diameter or Particle Size when Reynold's Number is Unity Calculator

✖Dynamic Viscosity for Aquifer of a fluid is the measure of its resistance to flow when an external force is applied.ⓘ Dynamic Viscosity for Aquifer [μ_viscosity]			+10% -10%
✖The Mass Density of a substance is its mass per unit volume.ⓘ Mass Density [ρ]			+10% -10%
✖Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer.ⓘ Flow Velocity for Unconfined Aquifer [V_f]			+10% -10%

✖Diameter for Unconfined Aquifer is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.ⓘ Diameter or Particle Size when Reynold's Number is Unity [D]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unconfined Aquifer Formulas PDF PDF Image

Diameter or Particle Size when Reynold's Number is Unity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter for Unconfined Aquifer = (Dynamic Viscosity for Aquifer/(Mass Density*Flow Velocity for Unconfined Aquifer))
D = (μ_viscosity/(ρ*V_f))
This formula uses 4 Variables

Variables Used

Diameter for Unconfined Aquifer - (Measured in Meter) - Diameter for Unconfined Aquifer is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.
Dynamic Viscosity for Aquifer - (Measured in Poise) - Dynamic Viscosity for Aquifer of a fluid is the measure of its resistance to flow when an external force is applied.
Mass Density - (Measured in Kilogram per Cubic Meter) - The Mass Density of a substance is its mass per unit volume.
Flow Velocity for Unconfined Aquifer - (Measured in Meter per Second) - Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer.

STEP 1: Convert Input(s) to Base Unit

Dynamic Viscosity for Aquifer: 0.19 Poise --> 0.19 Poise No Conversion Required
Mass Density: 997 Kilogram per Cubic Meter --> 997 Kilogram per Cubic Meter No Conversion Required
Flow Velocity for Unconfined Aquifer: 0.01 Meter per Second --> 0.01 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D = (μ_viscosity/(ρ*V_f)) --> (0.19/(997*0.01))

Evaluating ... ...

D = 0.0190571715145436

STEP 3: Convert Result to Output's Unit

0.0190571715145436 Meter --> No Conversion Required

FINAL ANSWER

0.0190571715145436 ≈ 0.019057 Meter <-- Diameter for Unconfined Aquifer

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Well Hydraulics » Unconfined Aquifer » Radial Distance and Radius of well » Diameter or Particle Size when Reynold's Number is Unity

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Radial Distance and Radius of well Calculators

Radial Distance of Well 2 based on Discharge of Two Wells under Consideration

LaTeX Go Radial Distance at Well 2 = Radial Distance at Observation Well 1*exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radius of Well based on Discharge in Unconfined Aquifer

LaTeX Go Radius of Well given Discharge = Radius of Influence/exp((pi*Coefficient of Permeability of Soil Particle*(Initial Aquifer Thickness^2-Depth of Water^2))/Discharge)

Radial Distance of Well 1 based on Discharge of Two Wells under Consideration

LaTeX Go Radial Distance 1 = Radial Distance at Observation Well 2/exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radius of Well based on Discharge in Unconfined Aquifer with Base 10

LaTeX Go Radius of Well given Discharge = Radius of Influence/10^((1.36*Coefficient of Permeability of Soil Particle*(Initial Aquifer Thickness^2-Depth of Water^2))/Discharge)

Diameter or Particle Size when Reynold's Number is Unity Formula

LaTeX Go

Diameter for Unconfined Aquifer = (Dynamic Viscosity for Aquifer/(Mass Density*Flow Velocity for Unconfined Aquifer))
D = (μ_viscosity/(ρ*V_f))

What is Viscosity?

The viscosity of a fluid is a measure of its resistance to deformation at a given rate. For liquids, it corresponds to the informal concept of "thickness": for example, syrup has a higher viscosity than water.

How to Calculate Diameter or Particle Size when Reynold's Number is Unity?

Diameter or Particle Size when Reynold's Number is Unity calculator uses Diameter for Unconfined Aquifer = (Dynamic Viscosity for Aquifer/(Mass Density*Flow Velocity for Unconfined Aquifer)) to calculate the Diameter for Unconfined Aquifer, The Diameter or Particle Size when Reynold's Number is Unity formula is defined as the calculation of the value of the diameter of particle size when Reynold's number is equal to one. Diameter for Unconfined Aquifer is denoted by D symbol.

How to calculate Diameter or Particle Size when Reynold's Number is Unity using this online calculator? To use this online calculator for Diameter or Particle Size when Reynold's Number is Unity, enter Dynamic Viscosity for Aquifer (μ_viscosity), Mass Density (ρ) & Flow Velocity for Unconfined Aquifer (V_f) and hit the calculate button. Here is how the Diameter or Particle Size when Reynold's Number is Unity calculation can be explained with given input values -> 0.019057 = (0.019/(997*0.01)).

FAQ

What is Diameter or Particle Size when Reynold's Number is Unity?

The Diameter or Particle Size when Reynold's Number is Unity formula is defined as the calculation of the value of the diameter of particle size when Reynold's number is equal to one and is represented as D = (μ_viscosity/(ρ*V_f)) or Diameter for Unconfined Aquifer = (Dynamic Viscosity for Aquifer/(Mass Density*Flow Velocity for Unconfined Aquifer)). Dynamic Viscosity for Aquifer of a fluid is the measure of its resistance to flow when an external force is applied, The Mass Density of a substance is its mass per unit volume & Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer.

How to calculate Diameter or Particle Size when Reynold's Number is Unity?

The Diameter or Particle Size when Reynold's Number is Unity formula is defined as the calculation of the value of the diameter of particle size when Reynold's number is equal to one is calculated using Diameter for Unconfined Aquifer = (Dynamic Viscosity for Aquifer/(Mass Density*Flow Velocity for Unconfined Aquifer)). To calculate Diameter or Particle Size when Reynold's Number is Unity, you need Dynamic Viscosity for Aquifer (μ_viscosity), Mass Density (ρ) & Flow Velocity for Unconfined Aquifer (V_f). With our tool, you need to enter the respective value for Dynamic Viscosity for Aquifer, Mass Density & Flow Velocity for Unconfined Aquifer and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search