Diameter of wheel given Average length of chip and Infeed Calculator

✖Length of Chip is the distance along the direction of the cutting edge or grinding wheel motion that the chip produced during machining or grinding extends.ⓘ Length of Chip [l_c]			+10% -10%
✖Feed is the rate at which a cutting tool or grinding wheel advances into the workpiece. It is usually measured in units of distance per revolution of the spindle.ⓘ Feed [f_in]			+10% -10%

✖The Diameter of Grinding Tool Wheel is the size of grinding wheel and a critical parameter in grinding operations. It determines the wheel's cutting speed, material removal rate, and surface finish.ⓘ Diameter of wheel given Average length of chip and Infeed [d_T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Grinding Operation Formula PDF PDF Image

Diameter of wheel given Average length of chip and Infeed Solution

STEP 0: Pre-Calculation Summary

Formula Used

The Diameter of Grinding Tool Wheel = (Length of Chip)^2/Feed
d_T = (l_c)^2/f_in
This formula uses 3 Variables

Variables Used

The Diameter of Grinding Tool Wheel - (Measured in Meter) - The Diameter of Grinding Tool Wheel is the size of grinding wheel and a critical parameter in grinding operations. It determines the wheel's cutting speed, material removal rate, and surface finish.
Length of Chip - (Measured in Meter) - Length of Chip is the distance along the direction of the cutting edge or grinding wheel motion that the chip produced during machining or grinding extends.
Feed - (Measured in Meter) - Feed is the rate at which a cutting tool or grinding wheel advances into the workpiece. It is usually measured in units of distance per revolution of the spindle.

STEP 1: Convert Input(s) to Base Unit

Length of Chip: 3.4 Millimeter --> 0.0034 Meter (Check conversion here)
Feed: 0.95 Millimeter --> 0.00095 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_T = (l_c)^2/f_in --> (0.0034)^2/0.00095

Evaluating ... ...

d_T = 0.0121684210526316

STEP 3: Convert Result to Output's Unit

0.0121684210526316 Meter -->12.1684210526316 Millimeter (Check conversion here)

FINAL ANSWER

12.1684210526316 ≈ 12.16842 Millimeter <-- The Diameter of Grinding Tool Wheel

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Analysis of Grinding Process » Cylindrical Grinding cycle » Wheel » Diameter of wheel given Average length of chip and Infeed

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Wheel Calculators

Surface speed of wheel given number of chip produce per time

LaTeX Go Surface Speed of Wheel for Given No of Chips = Number of Chip Produced per Unit Time/(Width of Grinding Path*Number of Active Grains per Area)

Diameter of wheel for given Average Length of chip

LaTeX Go The Diameter of Grinding Tool Wheel = 2*Length of Chip/sin(Angle Made by the Length of Chip)

Diameter of wheel for given infeed

LaTeX Go The Diameter of Grinding Tool Wheel = 2*Feed/(1-cos(Angle Made by the Length of Chip))

Diameter of wheel given Average length of chip and Infeed

LaTeX Go The Diameter of Grinding Tool Wheel = (Length of Chip)^2/Feed

Diameter of wheel given Average length of chip and Infeed Formula

LaTeX Go

The Diameter of Grinding Tool Wheel = (Length of Chip)^2/Feed
d_T = (l_c)^2/f_in

What are the specifications of grinding wheel?

Diamond/CBN grinding wheels (super abrasive wheels) can be applied to various specifications by combining "abrasive grain (abrasive grain type)", "grain size (abrasive grain size)", "bond strength", "degree of concentration (grain concentration in bond)", and "bond type (bonding material)".

How to Calculate Diameter of wheel given Average length of chip and Infeed?

Diameter of wheel given Average length of chip and Infeed calculator uses The Diameter of Grinding Tool Wheel = (Length of Chip)^2/Feed to calculate the The Diameter of Grinding Tool Wheel, Diameter of wheel given Average length of chip and Infeed" is calculating the diameter of the grinding wheel in a grinding cycle, given the average length of the chip and the infeed and This formula determines the diameter of the grinding wheel based on the square of the average length of the chip and the infeed during the grinding cycle. The Diameter of Grinding Tool Wheel is denoted by d_T symbol.

How to calculate Diameter of wheel given Average length of chip and Infeed using this online calculator? To use this online calculator for Diameter of wheel given Average length of chip and Infeed, enter Length of Chip (l_c) & Feed (f_in) and hit the calculate button. Here is how the Diameter of wheel given Average length of chip and Infeed calculation can be explained with given input values -> 12168.42 = (0.0034)^2/0.00095.

FAQ

What is Diameter of wheel given Average length of chip and Infeed?

Diameter of wheel given Average length of chip and Infeed" is calculating the diameter of the grinding wheel in a grinding cycle, given the average length of the chip and the infeed and This formula determines the diameter of the grinding wheel based on the square of the average length of the chip and the infeed during the grinding cycle and is represented as d_T = (l_c)^2/f_in or The Diameter of Grinding Tool Wheel = (Length of Chip)^2/Feed. Length of Chip is the distance along the direction of the cutting edge or grinding wheel motion that the chip produced during machining or grinding extends & Feed is the rate at which a cutting tool or grinding wheel advances into the workpiece. It is usually measured in units of distance per revolution of the spindle.

How to calculate Diameter of wheel given Average length of chip and Infeed?

Diameter of wheel given Average length of chip and Infeed" is calculating the diameter of the grinding wheel in a grinding cycle, given the average length of the chip and the infeed and This formula determines the diameter of the grinding wheel based on the square of the average length of the chip and the infeed during the grinding cycle is calculated using The Diameter of Grinding Tool Wheel = (Length of Chip)^2/Feed. To calculate Diameter of wheel given Average length of chip and Infeed, you need Length of Chip (l_c) & Feed (f_in). With our tool, you need to enter the respective value for Length of Chip & Feed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate The Diameter of Grinding Tool Wheel?

In this formula, The Diameter of Grinding Tool Wheel uses Length of Chip & Feed. We can use 3 other way(s) to calculate the same, which is/are as follows -

The Diameter of Grinding Tool Wheel = 2*Length of Chip/sin(Angle Made by the Length of Chip)
The Diameter of Grinding Tool Wheel = 2*Feed/(1-cos(Angle Made by the Length of Chip))
The Diameter of Grinding Tool Wheel = 2*(Machine Infeed Speed Towards Workpiece-The Feed Speed)

Home

FREE PDFs

🔍 Search