Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat Solution

STEP 0: Pre-Calculation Summary
Formula Used
Diameter of Valve Head = Diameter of Port+2*Projected Width of Valve Seat
dv = dp+2*w
This formula uses 3 Variables
Variables Used
Diameter of Valve Head - (Measured in Meter) - Diameter of Valve Head is the diameter of the top part of valve of an IC engine, valve intakes and exhausts gases to and from an engine.
Diameter of Port - (Measured in Meter) - Diameter of Port is the diameter of the opening of the port of an IC Engine.
Projected Width of Valve Seat - (Measured in Meter) - Projected Width of Valve Seat is the projected width of the seat of the valve for a seat angle of 45 degrees and is perpendicular to valve length.
STEP 1: Convert Input(s) to Base Unit
Diameter of Port: 40 Millimeter --> 0.04 Meter (Check conversion ​here)
Projected Width of Valve Seat: 3 Millimeter --> 0.003 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
dv = dp+2*w --> 0.04+2*0.003
Evaluating ... ...
dv = 0.046
STEP 3: Convert Result to Output's Unit
0.046 Meter -->46 Millimeter (Check conversion ​here)
FINAL ANSWER
46 Millimeter <-- Diameter of Valve Head
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verifier Image
Verified by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has verified this Calculator and 300+ more calculators!

Valve Head Calculators

Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat
​ LaTeX ​ Go Diameter of Valve Head = Diameter of Port+2*Projected Width of Valve Seat
Minimum Projected Width of Valve Seat given Port Diameter
​ LaTeX ​ Go Projected Width of Valve Seat = 0.05*Diameter of Port
Maximum Projected Width of Valve Seat given Port Diameter
​ LaTeX ​ Go Projected Width of Valve Seat = 0.07*Diameter of Port
Projected Width of Valve Seat given Port Diameter
​ LaTeX ​ Go Projected Width of Valve Seat = 0.06*Diameter of Port

Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat Formula

​LaTeX ​Go
Diameter of Valve Head = Diameter of Port+2*Projected Width of Valve Seat
dv = dp+2*w

What is a valve gear mechanism?

The valve gear mechanism is a subassembly of the IC engine and its function is to open and close the inlet and exhaust valves at a proper time with respect to the position of the piston and crankshaft. The fuel is admitted into the cylinder when the inlet valve is open. Also, the burnt gases escape when the exhaust valve is open. The main parts of a valve-gear mechanism are valve, spring, tappet, rocker arm, pushrod, cam, and camshaft.

How to Calculate Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat?

Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat calculator uses Diameter of Valve Head = Diameter of Port+2*Projected Width of Valve Seat to calculate the Diameter of Valve Head, The diameter of valve head given diameter of port and projected width of valve seat is the diameter of the top part of the valve of an IC engine. A valve intakes and exhausts gases to and from an engine. Diameter of Valve Head is denoted by dv symbol.

How to calculate Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat using this online calculator? To use this online calculator for Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat, enter Diameter of Port (dp) & Projected Width of Valve Seat (w) and hit the calculate button. Here is how the Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat calculation can be explained with given input values -> 46000 = 0.04+2*0.003.

FAQ

What is Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat?
The diameter of valve head given diameter of port and projected width of valve seat is the diameter of the top part of the valve of an IC engine. A valve intakes and exhausts gases to and from an engine and is represented as dv = dp+2*w or Diameter of Valve Head = Diameter of Port+2*Projected Width of Valve Seat. Diameter of Port is the diameter of the opening of the port of an IC Engine & Projected Width of Valve Seat is the projected width of the seat of the valve for a seat angle of 45 degrees and is perpendicular to valve length.
How to calculate Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat?
The diameter of valve head given diameter of port and projected width of valve seat is the diameter of the top part of the valve of an IC engine. A valve intakes and exhausts gases to and from an engine is calculated using Diameter of Valve Head = Diameter of Port+2*Projected Width of Valve Seat. To calculate Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat, you need Diameter of Port (dp) & Projected Width of Valve Seat (w). With our tool, you need to enter the respective value for Diameter of Port & Projected Width of Valve Seat and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter of Valve Head?
In this formula, Diameter of Valve Head uses Diameter of Port & Projected Width of Valve Seat. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Diameter of Valve Head = 1.12*Diameter of Port
  • Diameter of Valve Head = 18.666*Projected Width of Valve Seat
  • Diameter of Valve Head = sqrt((4*Gas Load on Exhaust Valve)/(pi*Back Pressure on Engine Valve))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!