Diameter of Turned Parts given Length-to-Diameter Ratio Calculator

✖Length to Diameter Ratio is the ratio of the flighted length of the screw to its outside diameter.ⓘ Length to Diameter Ratio [l_r]

+10%

-10%

✖The Diameter of Workpiece is the length of the largest cord perpendicular to its axis of the workpiece which is undergoing the operation.ⓘ Diameter of Turned Parts given Length-to-Diameter Ratio [d]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Turning Operation Formulas PDF PDF Image

Diameter of Turned Parts given Length-to-Diameter Ratio Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter of Workpiece = (1.67/Length to Diameter Ratio)^(1/0.68)
d = (1.67/l_r)^(1/0.68)
This formula uses 2 Variables

Variables Used

Diameter of Workpiece - (Measured in Inch) - The Diameter of Workpiece is the length of the largest cord perpendicular to its axis of the workpiece which is undergoing the operation.
Length to Diameter Ratio - Length to Diameter Ratio is the ratio of the flighted length of the screw to its outside diameter.

STEP 1: Convert Input(s) to Base Unit

Length to Diameter Ratio: 0.79 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d = (1.67/l_r)^(1/0.68) --> (1.67/0.79)^(1/0.68)

Evaluating ... ...

d = 3.00657898414216

STEP 3: Convert Result to Output's Unit

0.0763671061975164 Meter -->76.3671061975164 Millimeter (Check conversion here)

FINAL ANSWER

76.3671061975164 ≈ 76.36711 Millimeter <-- Diameter of Workpiece

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Turning Operation » Diameter of Turned Parts given Length-to-Diameter Ratio

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Turning Operation Calculators

Diameter of Workpiece given Constant for Cylindrical Turning

LaTeX Go Diameter of Workpiece = Constant For Machining Condition*Feed/(pi*Length of Cut)

Turning Length given Constant for Cylindrical Turning

LaTeX Go Length of Cut = Constant For Machining Condition*Feed/(pi*Diameter of Workpiece)

Feed given Constant for Cylindrical Turning

LaTeX Go Feed = pi*Diameter of Workpiece*Length of Cut/Constant For Machining Condition

Constant for given Cylindrical Turning

LaTeX Go Constant For Machining Condition = pi*Diameter of Workpiece*Length of Cut/Feed

Diameter of Turned Parts given Length-to-Diameter Ratio Formula

LaTeX Go

Diameter of Workpiece = (1.67/Length to Diameter Ratio)^(1/0.68)
d = (1.67/l_r)^(1/0.68)

What is L/D ratio in drilling?

The L/D ratio is the ratio of the flighted length of the screw to its outside diameter. The ratio calculation is calculated by dividing the flighted length of the screw by its nominal diameter.

How to Calculate Diameter of Turned Parts given Length-to-Diameter Ratio?

Diameter of Turned Parts given Length-to-Diameter Ratio calculator uses Diameter of Workpiece = (1.67/Length to Diameter Ratio)^(1/0.68) to calculate the Diameter of Workpiece, The Diameter of Turned Parts given Length-to-Diameter Ratio formula is defined as the diameter of the workpiece which is undergoing Turning. Diameter of Workpiece is denoted by d symbol.

How to calculate Diameter of Turned Parts given Length-to-Diameter Ratio using this online calculator? To use this online calculator for Diameter of Turned Parts given Length-to-Diameter Ratio, enter Length to Diameter Ratio (l_r) and hit the calculate button. Here is how the Diameter of Turned Parts given Length-to-Diameter Ratio calculation can be explained with given input values -> 76367.11 = (1.67/0.79)^(1/0.68).

FAQ

What is Diameter of Turned Parts given Length-to-Diameter Ratio?

The Diameter of Turned Parts given Length-to-Diameter Ratio formula is defined as the diameter of the workpiece which is undergoing Turning and is represented as d = (1.67/l_r)^(1/0.68) or Diameter of Workpiece = (1.67/Length to Diameter Ratio)^(1/0.68). Length to Diameter Ratio is the ratio of the flighted length of the screw to its outside diameter.

How to calculate Diameter of Turned Parts given Length-to-Diameter Ratio?

The Diameter of Turned Parts given Length-to-Diameter Ratio formula is defined as the diameter of the workpiece which is undergoing Turning is calculated using Diameter of Workpiece = (1.67/Length to Diameter Ratio)^(1/0.68). To calculate Diameter of Turned Parts given Length-to-Diameter Ratio, you need Length to Diameter Ratio (l_r). With our tool, you need to enter the respective value for Length to Diameter Ratio and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Diameter of Workpiece?

In this formula, Diameter of Workpiece uses Length to Diameter Ratio. We can use 1 other way(s) to calculate the same, which is/are as follows -

Diameter of Workpiece = Constant For Machining Condition*Feed/(pi*Length of Cut)

Home

FREE PDFs

🔍 Search