Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress Calculator

✖The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.ⓘ Width of Plate [w]			+10% -10%
✖The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.ⓘ Load on Flat Plate [P]			+10% -10%
✖The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.ⓘ Thickness of Plate [t]			+10% -10%
✖The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.ⓘ Nominal Stress [σ_o]			+10% -10%

✖The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.ⓘ Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress [d_h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Stress Concentration Factors in Design Formulas PDF PDF Image

Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter of Transverse Hole in Plate = Width of Plate-Load on Flat Plate/(Thickness of Plate*Nominal Stress)
d_h = w-P/(t*σ_o)
This formula uses 5 Variables

Variables Used

Diameter of Transverse Hole in Plate - (Measured in Meter) - The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.
Width of Plate - (Measured in Meter) - The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.
Load on Flat Plate - (Measured in Newton) - The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.
Thickness of Plate - (Measured in Meter) - The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.
Nominal Stress - (Measured in Pascal) - The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.

STEP 1: Convert Input(s) to Base Unit

Width of Plate: 70 Millimeter --> 0.07 Meter (Check conversion here)
Load on Flat Plate: 8750 Newton --> 8750 Newton No Conversion Required
Thickness of Plate: 10 Millimeter --> 0.01 Meter (Check conversion here)
Nominal Stress: 25 Newton per Square Millimeter --> 25000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_h = w-P/(t*σ_o) --> 0.07-8750/(0.01*25000000)

Evaluating ... ...

d_h = 0.035

STEP 3: Convert Result to Output's Unit

0.035 Meter -->35 Millimeter (Check conversion here)

FINAL ANSWER

35 Millimeter <-- Diameter of Transverse Hole in Plate

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design against Fluctuating Load » Stress Concentration Factors in Design » Rectangular Plate against Fluctuating Loads » Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Rectangular Plate against Fluctuating Loads Calculators

Nominal Tensile Stress in Rectangular Plate with Transverse Hole

LaTeX Go Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)

Width of Rectangular Plate with Transverse Hole given Nominal Stress

LaTeX Go Width of Plate = Load on Flat Plate/(Thickness of Plate*Nominal Stress)+Diameter of Transverse Hole in Plate

Load on Rectangular Plate with Transverse Hole given Nominal Stress

LaTeX Go Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate

Highest Value of Actual Stress near Discontinuity

LaTeX Go Highest Value of Actual Stress near Discontinuity = Fatigue Stress Concentration Factor*Nominal Stress

Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress Formula

LaTeX Go

Diameter of Transverse Hole in Plate = Width of Plate-Load on Flat Plate/(Thickness of Plate*Nominal Stress)
d_h = w-P/(t*σ_o)

What is stress concentration?

Stress concentration is defined as the localization of high stresses due to the irregularities present in the component and abrupt changes in the cross-section. In order to consider the effect of stress concentration and find out localized stresses, a factor called the stress concentration factor is used.

How to Calculate Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress?

Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress calculator uses Diameter of Transverse Hole in Plate = Width of Plate-Load on Flat Plate/(Thickness of Plate*Nominal Stress) to calculate the Diameter of Transverse Hole in Plate, The diameter of transverse hole of rectangular plate with stress concentration given nominal stress is the diameter of the inside surface of the transverse hole of a rectangular plate with stress concentration. Diameter of Transverse Hole in Plate is denoted by d_h symbol.

How to calculate Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress using this online calculator? To use this online calculator for Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress, enter Width of Plate (w), Load on Flat Plate (P), Thickness of Plate (t) & Nominal Stress (σ_o) and hit the calculate button. Here is how the Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress calculation can be explained with given input values -> 35000 = 0.07-8750/(0.01*25000000).

FAQ

What is Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress?

The diameter of transverse hole of rectangular plate with stress concentration given nominal stress is the diameter of the inside surface of the transverse hole of a rectangular plate with stress concentration and is represented as d_h = w-P/(t*σ_o) or Diameter of Transverse Hole in Plate = Width of Plate-Load on Flat Plate/(Thickness of Plate*Nominal Stress). The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications, The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions, The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design & The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.

How to calculate Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress?

The diameter of transverse hole of rectangular plate with stress concentration given nominal stress is the diameter of the inside surface of the transverse hole of a rectangular plate with stress concentration is calculated using Diameter of Transverse Hole in Plate = Width of Plate-Load on Flat Plate/(Thickness of Plate*Nominal Stress). To calculate Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress, you need Width of Plate (w), Load on Flat Plate (P), Thickness of Plate (t) & Nominal Stress (σ_o). With our tool, you need to enter the respective value for Width of Plate, Load on Flat Plate, Thickness of Plate & Nominal Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search