Diameter of Rod of Cotter Joint given Thickness of Spigot Collar Calculator

✖Thickness of spigot collar is defined as thickness of collar of spigot of a cotter joint.ⓘ Thickness of Spigot Collar [t₁]

+10%

-10%

✖Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.ⓘ Diameter of Rod of Cotter Joint given Thickness of Spigot Collar [d]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Joint Geometry and Dimensions Formulas PDF PDF Image

Diameter of Rod of Cotter Joint given Thickness of Spigot Collar Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter of Rod of Cotter Joint = Thickness of Spigot Collar/(0.45)
d = t₁/(0.45)
This formula uses 2 Variables

Variables Used

Diameter of Rod of Cotter Joint - (Measured in Meter) - Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.
Thickness of Spigot Collar - (Measured in Meter) - Thickness of spigot collar is defined as thickness of collar of spigot of a cotter joint.

STEP 1: Convert Input(s) to Base Unit

Thickness of Spigot Collar: 13 Millimeter --> 0.013 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d = t₁/(0.45) --> 0.013/(0.45)

Evaluating ... ...

d = 0.0288888888888889

STEP 3: Convert Result to Output's Unit

0.0288888888888889 Meter -->28.8888888888889 Millimeter (Check conversion here)

FINAL ANSWER

28.8888888888889 ≈ 28.88889 Millimeter <-- Diameter of Rod of Cotter Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Cotter Joint » Mechanical » Joint Geometry and Dimensions » Diameter of Rod of Cotter Joint given Thickness of Spigot Collar

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Joint Geometry and Dimensions Calculators

Diameter of Spigot of Cotter Joint given Compressive Stress

LaTeX Go Diameter of Spigot = Diameter of Socket Collar-(Load on Cotter Joint)/(Thickness of Cotter*Compressive Stress in Spigot)

Diameter of Spigot of Cotter Joint given Shear Stress in Spigot

LaTeX Go Diameter of Spigot = (Load on Cotter Joint)/(2*Gap between End of Slot to End of Spigot*Shear Stress in Spigot)

Minimum Diameter of Spigot in Cotter Joint Subjected to Crushing Stress

LaTeX Go Diameter of Spigot = Load on Cotter Joint/(Crushing Stress induced in Cotter*Thickness of Cotter)

Diameter of Spigot Collar given Rod Diameter

LaTeX Go Diameter of Spigot Collar = 1.5*Diameter of Rod of Cotter Joint

Diameter of Rod of Cotter Joint given Thickness of Spigot Collar Formula

LaTeX Go

Diameter of Rod of Cotter Joint = Thickness of Spigot Collar/(0.45)
d = t₁/(0.45)

Sleeve and Cotter Joint

The sleeve and cotter joint is a type of joint used to typically connect two similar coaxial cylindrical rods. It includes a sleeve and two wedge-shaped tapered cotters. Appropriate slots are cut in the sleeve and in the cylindrical rods.
Rectangular rods and dissimilar cylindrical rods cannot be connected using this joint. A sleeve and cotter joints do not allow angular misalignment between its cylindrical members. It cannot connect cylindrical members which undergo rotation.

How to Calculate Diameter of Rod of Cotter Joint given Thickness of Spigot Collar?

Diameter of Rod of Cotter Joint given Thickness of Spigot Collar calculator uses Diameter of Rod of Cotter Joint = Thickness of Spigot Collar/(0.45) to calculate the Diameter of Rod of Cotter Joint, Diameter of rod of cotter joint given thickness of spigot collar is the diameter of the end rod of the cotter joint. Diameter of Rod of Cotter Joint is denoted by d symbol.

How to calculate Diameter of Rod of Cotter Joint given Thickness of Spigot Collar using this online calculator? To use this online calculator for Diameter of Rod of Cotter Joint given Thickness of Spigot Collar, enter Thickness of Spigot Collar (t₁) and hit the calculate button. Here is how the Diameter of Rod of Cotter Joint given Thickness of Spigot Collar calculation can be explained with given input values -> 28888.89 = 0.013/(0.45).

FAQ

What is Diameter of Rod of Cotter Joint given Thickness of Spigot Collar?

Diameter of rod of cotter joint given thickness of spigot collar is the diameter of the end rod of the cotter joint and is represented as d = t₁/(0.45) or Diameter of Rod of Cotter Joint = Thickness of Spigot Collar/(0.45). Thickness of spigot collar is defined as thickness of collar of spigot of a cotter joint.

How to calculate Diameter of Rod of Cotter Joint given Thickness of Spigot Collar?

Diameter of rod of cotter joint given thickness of spigot collar is the diameter of the end rod of the cotter joint is calculated using Diameter of Rod of Cotter Joint = Thickness of Spigot Collar/(0.45). To calculate Diameter of Rod of Cotter Joint given Thickness of Spigot Collar, you need Thickness of Spigot Collar (t₁). With our tool, you need to enter the respective value for Thickness of Spigot Collar and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Diameter of Rod of Cotter Joint?

In this formula, Diameter of Rod of Cotter Joint uses Thickness of Spigot Collar. We can use 3 other way(s) to calculate the same, which is/are as follows -

Diameter of Rod of Cotter Joint = sqrt((4*Load on Cotter Joint)/(Tensile Stress in Cotter Joint Rod*pi))
Diameter of Rod of Cotter Joint = Thickness of Cotter/(0.31)
Diameter of Rod of Cotter Joint = Diameter of Spigot Collar/1.5

Home

FREE PDFs

🔍 Search