Diameter of Rod of Cotter Joint given Thickness of Cotter Solution

STEP 0: Pre-Calculation Summary
Formula Used
Diameter of Rod of Cotter Joint = Thickness of Cotter/(0.31)
d = tc/(0.31)
This formula uses 2 Variables
Variables Used
Diameter of Rod of Cotter Joint - (Measured in Meter) - Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.
Thickness of Cotter - (Measured in Meter) - Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force.
STEP 1: Convert Input(s) to Base Unit
Thickness of Cotter: 21.478 Millimeter --> 0.021478 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
d = tc/(0.31) --> 0.021478/(0.31)
Evaluating ... ...
d = 0.0692838709677419
STEP 3: Convert Result to Output's Unit
0.0692838709677419 Meter -->69.2838709677419 Millimeter (Check conversion ​here)
FINAL ANSWER
69.2838709677419 69.28387 Millimeter <-- Diameter of Rod of Cotter Joint
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verifier Image
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

Joint Geometry and Dimensions Calculators

Diameter of Spigot of Cotter Joint given Compressive Stress
​ LaTeX ​ Go Diameter of Spigot = Diameter of Socket Collar-(Load on Cotter Joint)/(Thickness of Cotter*Compressive Stress in Spigot)
Diameter of Spigot of Cotter Joint given Shear Stress in Spigot
​ LaTeX ​ Go Diameter of Spigot = (Load on Cotter Joint)/(2*Gap between End of Slot to End of Spigot*Shear Stress in Spigot)
Minimum Diameter of Spigot in Cotter Joint Subjected to Crushing Stress
​ LaTeX ​ Go Diameter of Spigot = Load on Cotter Joint/(Crushing Stress induced in Cotter*Thickness of Cotter)
Diameter of Spigot Collar given Rod Diameter
​ LaTeX ​ Go Diameter of Spigot Collar = 1.5*Diameter of Rod of Cotter Joint

Diameter of Rod of Cotter Joint given Thickness of Cotter Formula

​LaTeX ​Go
Diameter of Rod of Cotter Joint = Thickness of Cotter/(0.31)
d = tc/(0.31)

What is a cotter and when is it used?

Cotter is a flat wedge-shaped metal piece that is used to connect two rods that transmit the force but without rotation. The force may be axial and of tensile or compressive nature. Cotter is fitted in the tapered slot and remains in its position because of wedge action.

How to Calculate Diameter of Rod of Cotter Joint given Thickness of Cotter?

Diameter of Rod of Cotter Joint given Thickness of Cotter calculator uses Diameter of Rod of Cotter Joint = Thickness of Cotter/(0.31) to calculate the Diameter of Rod of Cotter Joint, Diameter of rod of cotter joint given thickness of cotter is the diameter of the end rod of the cotter joint. Diameter of Rod of Cotter Joint is denoted by d symbol.

How to calculate Diameter of Rod of Cotter Joint given Thickness of Cotter using this online calculator? To use this online calculator for Diameter of Rod of Cotter Joint given Thickness of Cotter, enter Thickness of Cotter (tc) and hit the calculate button. Here is how the Diameter of Rod of Cotter Joint given Thickness of Cotter calculation can be explained with given input values -> 69283.87 = 0.021478/(0.31).

FAQ

What is Diameter of Rod of Cotter Joint given Thickness of Cotter?
Diameter of rod of cotter joint given thickness of cotter is the diameter of the end rod of the cotter joint and is represented as d = tc/(0.31) or Diameter of Rod of Cotter Joint = Thickness of Cotter/(0.31). Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force.
How to calculate Diameter of Rod of Cotter Joint given Thickness of Cotter?
Diameter of rod of cotter joint given thickness of cotter is the diameter of the end rod of the cotter joint is calculated using Diameter of Rod of Cotter Joint = Thickness of Cotter/(0.31). To calculate Diameter of Rod of Cotter Joint given Thickness of Cotter, you need Thickness of Cotter (tc). With our tool, you need to enter the respective value for Thickness of Cotter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter of Rod of Cotter Joint?
In this formula, Diameter of Rod of Cotter Joint uses Thickness of Cotter. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Diameter of Rod of Cotter Joint = sqrt((4*Load on Cotter Joint)/(Tensile Stress in Cotter Joint Rod*pi))
  • Diameter of Rod of Cotter Joint = Diameter of Spigot Collar/1.5
  • Diameter of Rod of Cotter Joint = Diameter of Socket Collar/2.4
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!