Diameter of rivet given strength of joint for butt joint with double cover plates Calculator

✖Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.ⓘ Safe Load Joint [P_safe]			+10% -10%
✖Number of Rivets Per Pitch is defined as total number of rivets that are present on the pitch of the rivet.ⓘ Number of Rivets Per Pitch [n]			+10% -10%
✖Safe shear stress is always less than the yield shear stress.ⓘ Safe Shear Stress [T_safe]			+10% -10%

✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Diameter of rivet given strength of joint for butt joint with double cover plates [D_rivet]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Diameter of rivet given strength of joint for butt joint with double cover plates Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rivet Diameter = sqrt(Safe Load Joint/(Number of Rivets Per Pitch*2*(pi/4)*Safe Shear Stress))
D_rivet = sqrt(P_safe/(n*2*(pi/4)*T_safe))
This formula uses 1 Constants, 1 Functions, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Safe Load Joint - (Measured in Newton) - Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.
Number of Rivets Per Pitch - Number of Rivets Per Pitch is defined as total number of rivets that are present on the pitch of the rivet.
Safe Shear Stress - (Measured in Pascal) - Safe shear stress is always less than the yield shear stress.

STEP 1: Convert Input(s) to Base Unit

Safe Load Joint: 4.5 Kilonewton --> 4500 Newton (Check conversion here)
Number of Rivets Per Pitch: 2 --> No Conversion Required
Safe Shear Stress: 0.24 Megapascal --> 240000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_rivet = sqrt(P_safe/(n*2*(pi/4)*T_safe)) --> sqrt(4500/(2*2*(pi/4)*240000))

Evaluating ... ...

D_rivet = 0.0772548404046379

STEP 3: Convert Result to Output's Unit

0.0772548404046379 Meter -->77.2548404046379 Millimeter (Check conversion here)

FINAL ANSWER

77.2548404046379 ≈ 77.25484 Millimeter <-- Rivet Diameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Shearing of Rivet » Diameter of rivet given strength of joint for butt joint with double cover plates

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Shearing of Rivet Calculators

Diameter of rivet given safe load per pitch length in single rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(1*(pi/4)*Safe Shear Stress))

Diameter of rivet given safe load per pitch length in double rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(2*(pi/4)*Safe Shear Stress))

Safe Load per Pitch Length using Single Rivet Lap Joint

LaTeX Go Safe Load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Safe Load per Pitch Length using Double Rivet Lap Joint

LaTeX Go Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Diameter of rivet given strength of joint for butt joint with double cover plates Formula

LaTeX Go

Rivet Diameter = sqrt(Safe Load Joint/(Number of Rivets Per Pitch*2*(pi/4)*Safe Shear Stress))
D_rivet = sqrt(P_safe/(n*2*(pi/4)*T_safe))

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Diameter of rivet given strength of joint for butt joint with double cover plates?

Diameter of rivet given strength of joint for butt joint with double cover plates calculator uses Rivet Diameter = sqrt(Safe Load Joint/(Number of Rivets Per Pitch*2*(pi/4)*Safe Shear Stress)) to calculate the Rivet Diameter, The Diameter of rivet given strength of joint for butt joint with double cover plates formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter. Rivet Diameter is denoted by D_rivet symbol.

How to calculate Diameter of rivet given strength of joint for butt joint with double cover plates using this online calculator? To use this online calculator for Diameter of rivet given strength of joint for butt joint with double cover plates, enter Safe Load Joint (P_safe), Number of Rivets Per Pitch (n) & Safe Shear Stress (T_safe) and hit the calculate button. Here is how the Diameter of rivet given strength of joint for butt joint with double cover plates calculation can be explained with given input values -> 77254.84 = sqrt(4500/(2*2*(pi/4)*240000)).

FAQ

What is Diameter of rivet given strength of joint for butt joint with double cover plates?

The Diameter of rivet given strength of joint for butt joint with double cover plates formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter and is represented as D_rivet = sqrt(P_safe/(n*2*(pi/4)*T_safe)) or Rivet Diameter = sqrt(Safe Load Joint/(Number of Rivets Per Pitch*2*(pi/4)*Safe Shear Stress)). Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device, Number of Rivets Per Pitch is defined as total number of rivets that are present on the pitch of the rivet & Safe shear stress is always less than the yield shear stress.

How to calculate Diameter of rivet given strength of joint for butt joint with double cover plates?

The Diameter of rivet given strength of joint for butt joint with double cover plates formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter is calculated using Rivet Diameter = sqrt(Safe Load Joint/(Number of Rivets Per Pitch*2*(pi/4)*Safe Shear Stress)). To calculate Diameter of rivet given strength of joint for butt joint with double cover plates, you need Safe Load Joint (P_safe), Number of Rivets Per Pitch (n) & Safe Shear Stress (T_safe). With our tool, you need to enter the respective value for Safe Load Joint, Number of Rivets Per Pitch & Safe Shear Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Rivet Diameter?

In this formula, Rivet Diameter uses Safe Load Joint, Number of Rivets Per Pitch & Safe Shear Stress. We can use 3 other way(s) to calculate the same, which is/are as follows -

Rivet Diameter = sqrt(Safe Load Joint/(1*(pi/4)*Safe Shear Stress))
Rivet Diameter = sqrt(Safe Load Joint/(2*(pi/4)*Safe Shear Stress))
Rivet Diameter = sqrt(Safe Load Joint/(3*(pi/4)*Safe Shear Stress))

Home

FREE PDFs

🔍 Search