Diameter of rivet given safe tensile load that plate can withstand Calculator

✖Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.ⓘ Pitch of Rivet [p]			+10% -10%
✖Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.ⓘ Tensile Load [P_load]			+10% -10%
✖Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Tensile Stress [σ_t]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%

✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Diameter of rivet given safe tensile load that plate can withstand [D_rivet]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Diameter of rivet given safe tensile load that plate can withstand Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate))
D_rivet = p-(P_load/(σ_t*t_plate))
This formula uses 5 Variables

Variables Used

Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Pitch of Rivet - (Measured in Meter) - Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.
Tensile Load - (Measured in Newton) - Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.
Tensile Stress - (Measured in Pascal) - Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

STEP 1: Convert Input(s) to Base Unit

Pitch of Rivet: 20 Millimeter --> 0.02 Meter (Check conversion here)
Tensile Load: 0.012 Kilonewton --> 12 Newton (Check conversion here)
Tensile Stress: 0.173 Megapascal --> 173000 Pascal (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_rivet = p-(P_load/(σ_t*t_plate)) --> 0.02-(12/(173000*0.012))

Evaluating ... ...

D_rivet = 0.0142196531791908

STEP 3: Convert Result to Output's Unit

0.0142196531791908 Meter -->14.2196531791908 Millimeter (Check conversion here)

FINAL ANSWER

14.2196531791908 ≈ 14.21965 Millimeter <-- Rivet Diameter

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Tearing of the Plate Between Rivets of a Row » Diameter of rivet given safe tensile load that plate can withstand

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Tearing of the Plate Between Rivets of a Row Calculators

Safe tensile load that plate can withstand

LaTeX Go Tensile Load = Tensile Stress*(Pitch of Rivet-Rivet Diameter)*Thickness of Plate

Area of plate for given safe tensile load that plate can withstand

LaTeX Go Area of Base Plate = Tensile Load/Tensile Stress

Safe tensile load that plate can withstand given area of plate

LaTeX Go Tensile Load = Tensile Stress*Area of Base Plate

Safe tensile stress given area of base plate and tensile load

LaTeX Go Tensile Stress = Tensile Load/Area of Base Plate

Diameter of rivet given safe tensile load that plate can withstand Formula

LaTeX Go

Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate))
D_rivet = p-(P_load/(σ_t*t_plate))

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Diameter of rivet given safe tensile load that plate can withstand?

Diameter of rivet given safe tensile load that plate can withstand calculator uses Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate)) to calculate the Rivet Diameter, The Diameter of rivet given safe tensile load that plate can withstand formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter. Rivet Diameter is denoted by D_rivet symbol.

How to calculate Diameter of rivet given safe tensile load that plate can withstand using this online calculator? To use this online calculator for Diameter of rivet given safe tensile load that plate can withstand, enter Pitch of Rivet (p), Tensile Load (P_load), Tensile Stress (σ_t) & Thickness of Plate (t_plate) and hit the calculate button. Here is how the Diameter of rivet given safe tensile load that plate can withstand calculation can be explained with given input values -> -4609094.412331 = 0.02-(12/(173000*0.012)).

FAQ

What is Diameter of rivet given safe tensile load that plate can withstand?

The Diameter of rivet given safe tensile load that plate can withstand formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter and is represented as D_rivet = p-(P_load/(σ_t*t_plate)) or Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate)). Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member, Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen, Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force & The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

How to calculate Diameter of rivet given safe tensile load that plate can withstand?

The Diameter of rivet given safe tensile load that plate can withstand formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter is calculated using Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate)). To calculate Diameter of rivet given safe tensile load that plate can withstand, you need Pitch of Rivet (p), Tensile Load (P_load), Tensile Stress (σ_t) & Thickness of Plate (t_plate). With our tool, you need to enter the respective value for Pitch of Rivet, Tensile Load, Tensile Stress & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search