Diameter of rivet given efficiency of riveted joint Calculator

✖Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.ⓘ Pitch of Rivet [p]			+10% -10%
✖Efficiency of riveted joint is defined as the ratio of the strength of the joint to the strength of the solid plate.ⓘ Efficiency of riveted joint [η]			+10% -10%

✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Diameter of rivet given efficiency of riveted joint [D_rivet]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Diameter of rivet given efficiency of riveted joint Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rivet Diameter = Pitch of Rivet*(1-Efficiency of riveted joint)
D_rivet = p*(1-η)
This formula uses 3 Variables

Variables Used

Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Pitch of Rivet - (Measured in Meter) - Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.
Efficiency of riveted joint - Efficiency of riveted joint is defined as the ratio of the strength of the joint to the strength of the solid plate.

STEP 1: Convert Input(s) to Base Unit

Pitch of Rivet: 2629.068 Millimeter --> 2.629068 Meter (Check conversion here)
Efficiency of riveted joint: 0.75 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_rivet = p*(1-η) --> 2.629068*(1-0.75)

Evaluating ... ...

D_rivet = 0.657267

STEP 3: Convert Result to Output's Unit

0.657267 Meter -->657.267 Millimeter (Check conversion here)

FINAL ANSWER

657.267 Millimeter <-- Rivet Diameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Mechanical » Design of Riveted Joint » Diameter of rivet given efficiency of riveted joint

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Design of Riveted Joint Calculators

Diameter of rivet(for dimension in cm)

LaTeX Go Rivet Diameter = 1.6*sqrt(Thickness of Plate)

Diameter of rivet

LaTeX Go Rivet Diameter = 6*sqrt(Thickness of Plate)

Thickness of main plate(for dimension in cm)

LaTeX Go Thickness of Plate = (Rivet Diameter/1.6)^2

Thickness of main plate(for dimension in mm)

LaTeX Go Thickness of Plate = (Rivet Diameter/6)^2

Diameter of rivet given efficiency of riveted joint Formula

LaTeX Go

Rivet Diameter = Pitch of Rivet*(1-Efficiency of riveted joint)
D_rivet = p*(1-η)

What is the difference between solid shank rivet and special rivet?

Two of the major types of rivets used in the aircraft are the common solid shank type, which must be driven using a bucking bar, and the special (blind) rivets, which may be installed where it is impossible to use a bucking bar. Solid shank rivets are generally used in repair work.

How to Calculate Diameter of rivet given efficiency of riveted joint?

Diameter of rivet given efficiency of riveted joint calculator uses Rivet Diameter = Pitch of Rivet*(1-Efficiency of riveted joint) to calculate the Rivet Diameter, The Diameter of rivet given efficiency of riveted joint formula is defined as a chord that runs through the center point of the rivet. Rivet Diameter is denoted by D_rivet symbol.

How to calculate Diameter of rivet given efficiency of riveted joint using this online calculator? To use this online calculator for Diameter of rivet given efficiency of riveted joint, enter Pitch of Rivet (p) & Efficiency of riveted joint (η) and hit the calculate button. Here is how the Diameter of rivet given efficiency of riveted joint calculation can be explained with given input values -> 5000 = 2.629068*(1-0.75).

FAQ

What is Diameter of rivet given efficiency of riveted joint?

The Diameter of rivet given efficiency of riveted joint formula is defined as a chord that runs through the center point of the rivet and is represented as D_rivet = p*(1-η) or Rivet Diameter = Pitch of Rivet*(1-Efficiency of riveted joint). Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member & Efficiency of riveted joint is defined as the ratio of the strength of the joint to the strength of the solid plate.

How to calculate Diameter of rivet given efficiency of riveted joint?

The Diameter of rivet given efficiency of riveted joint formula is defined as a chord that runs through the center point of the rivet is calculated using Rivet Diameter = Pitch of Rivet*(1-Efficiency of riveted joint). To calculate Diameter of rivet given efficiency of riveted joint, you need Pitch of Rivet (p) & Efficiency of riveted joint (η). With our tool, you need to enter the respective value for Pitch of Rivet & Efficiency of riveted joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Rivet Diameter?

In this formula, Rivet Diameter uses Pitch of Rivet & Efficiency of riveted joint. We can use 2 other way(s) to calculate the same, which is/are as follows -

Rivet Diameter = 1.6*sqrt(Thickness of Plate)
Rivet Diameter = 6*sqrt(Thickness of Plate)

Home

FREE PDFs

🔍 Search