Diameter of rivet Calculator

✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]

+10%

-10%

✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Diameter of rivet [D_rivet]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Diameter of rivet Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rivet Diameter = 6*sqrt(Thickness of Plate)
D_rivet = 6*sqrt(t_plate)
This formula uses 1 Functions, 2 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

STEP 1: Convert Input(s) to Base Unit

Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_rivet = 6*sqrt(t_plate) --> 6*sqrt(0.012)

Evaluating ... ...

D_rivet = 0.657267069006199

STEP 3: Convert Result to Output's Unit

0.657267069006199 Meter -->657.267069006199 Millimeter (Check conversion here)

FINAL ANSWER

657.267069006199 ≈ 657.2671 Millimeter <-- Rivet Diameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Mechanical » Design of Riveted Joint » Diameter of rivet

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Design of Riveted Joint Calculators

Diameter of rivet(for dimension in cm)

LaTeX Go Rivet Diameter = 1.6*sqrt(Thickness of Plate)

Diameter of rivet

LaTeX Go Rivet Diameter = 6*sqrt(Thickness of Plate)

Thickness of main plate(for dimension in cm)

LaTeX Go Thickness of Plate = (Rivet Diameter/1.6)^2

Thickness of main plate(for dimension in mm)

LaTeX Go Thickness of Plate = (Rivet Diameter/6)^2

Diameter of rivet Formula

LaTeX Go

Rivet Diameter = 6*sqrt(Thickness of Plate)
D_rivet = 6*sqrt(t_plate)

What is the difference between solid shank rivet and special rivet?

Two of the major types of rivets used in the aircraft are the common solid shank type, which must be driven using a bucking bar, and the special (blind) rivets, which may be installed where it is impossible to use a bucking bar. Solid shank rivets are generally used in repair work.

How to Calculate Diameter of rivet?

Diameter of rivet calculator uses Rivet Diameter = 6*sqrt(Thickness of Plate) to calculate the Rivet Diameter, The Diameter of rivet(for dimension in mm) formula is defined as a chord that runs through the center point of the rivet. Rivet Diameter is denoted by D_rivet symbol.

How to calculate Diameter of rivet using this online calculator? To use this online calculator for Diameter of rivet, enter Thickness of Plate (t_plate) and hit the calculate button. Here is how the Diameter of rivet calculation can be explained with given input values -> 657267.1 = 6*sqrt(0.012).

FAQ

What is Diameter of rivet?

The Diameter of rivet(for dimension in mm) formula is defined as a chord that runs through the center point of the rivet and is represented as D_rivet = 6*sqrt(t_plate) or Rivet Diameter = 6*sqrt(Thickness of Plate). The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

How to calculate Diameter of rivet?

The Diameter of rivet(for dimension in mm) formula is defined as a chord that runs through the center point of the rivet is calculated using Rivet Diameter = 6*sqrt(Thickness of Plate). To calculate Diameter of rivet, you need Thickness of Plate (t_plate). With our tool, you need to enter the respective value for Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Rivet Diameter?

In this formula, Rivet Diameter uses Thickness of Plate. We can use 2 other way(s) to calculate the same, which is/are as follows -

Rivet Diameter = 1.6*sqrt(Thickness of Plate)
Rivet Diameter = Pitch of Rivet*(1-Efficiency of riveted joint)

Home

FREE PDFs

🔍 Search