Diameter of Pipe given Tensile End Fiber Stress Calculator

✖Extreme Fiber Stress is the maximum stress experienced by the outermost fibers of a material or structural element when subjected to external loads.ⓘ Extreme Fiber Stress [S]			+10% -10%
✖Load on Buried Pipe per Unit Length includes the weight of the pipe, ﬁttings, insulation, ﬂuid in pipe, piping components such as valves, valve operators, ﬂanges, and so on.ⓘ Load on Buried Pipe per Unit Length [w^']			+10% -10%
✖Thickness of Pipe is the smaller dimension of pipe. It is the distance between the inner and outer or front and back surfaces of the pipe.ⓘ Thickness of Pipe [t_pipe]			+10% -10%

✖Diameter of Pipe is the diameter of the pipe in which the liquid is flowing.ⓘ Diameter of Pipe given Tensile End Fiber Stress [D_pipe]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Stresses Due to External Loads Formulas PDF PDF Image

Diameter of Pipe given Tensile End Fiber Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter of Pipe = (Extreme Fiber Stress+(Load on Buried Pipe per Unit Length)/(2*Thickness of Pipe))*((8*Thickness of Pipe^2)/(3*Load on Buried Pipe per Unit Length))
D_pipe = (S+(w^')/(2*t_pipe))*((8*t_pipe^2)/(3*w^'))
This formula uses 4 Variables

Variables Used

Diameter of Pipe - (Measured in Meter) - Diameter of Pipe is the diameter of the pipe in which the liquid is flowing.
Extreme Fiber Stress - (Measured in Pascal) - Extreme Fiber Stress is the maximum stress experienced by the outermost fibers of a material or structural element when subjected to external loads.
Load on Buried Pipe per Unit Length - (Measured in Newton per Meter) - Load on Buried Pipe per Unit Length includes the weight of the pipe, ﬁttings, insulation, ﬂuid in pipe, piping components such as valves, valve operators, ﬂanges, and so on.
Thickness of Pipe - (Measured in Meter) - Thickness of Pipe is the smaller dimension of pipe. It is the distance between the inner and outer or front and back surfaces of the pipe.

STEP 1: Convert Input(s) to Base Unit

Extreme Fiber Stress: 20 Kilonewton per Square Meter --> 20000 Pascal (Check conversion here)
Load on Buried Pipe per Unit Length: 24 Kilonewton per Meter --> 24000 Newton per Meter (Check conversion here)
Thickness of Pipe: 0.98 Meter --> 0.98 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_pipe = (S+(w^')/(2*t_pipe))*((8*t_pipe^2)/(3*w^')) --> (20000+(24000)/(2*0.98))*((8*0.98^2)/(3*24000))

Evaluating ... ...

D_pipe = 3.44088888888889

STEP 3: Convert Result to Output's Unit

3.44088888888889 Meter --> No Conversion Required

FINAL ANSWER

3.44088888888889 ≈ 3.440889 Meter <-- Diameter of Pipe

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Conveyance of Water » Stresses in Pipes » Stresses Due to External Loads » Diameter of Pipe given Tensile End Fiber Stress

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Stresses Due to External Loads Calculators

Width of Trench for Load per Meter Length of Pipe

LaTeX Go Width of Trench = sqrt(Load on Buried Pipe per Unit Length/(Coefficient Dependent on Soil in Environmental*Unit Weight of Fill))

Constant which depend upon type of Soil for Load per meter Length of Pipe

LaTeX Go Coefficient Dependent on Soil in Environmental = Load on Buried Pipe per Unit Length/(Unit Weight of Fill*(Width of Trench)^2)

Unit Weight of Backfill Material for Load per Meter Length of Pipe

LaTeX Go Unit Weight of Fill = Load on Buried Pipe per Unit Length/(Coefficient Dependent on Soil in Environmental*(Width of Trench)^2)

Load per Meter Length of Pipe

LaTeX Go Load on Buried Pipe per Unit Length = Coefficient Dependent on Soil in Environmental*Unit Weight of Fill*(Width of Trench)^2

Diameter of Pipe given Tensile End Fiber Stress Formula

LaTeX Go

What is tensile stress ?

Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force. Tensile means the material is under tension and that there are forces acting on it trying to stretch the material.

How to Calculate Diameter of Pipe given Tensile End Fiber Stress?

Diameter of Pipe given Tensile End Fiber Stress calculator uses Diameter of Pipe = (Extreme Fiber Stress+(Load on Buried Pipe per Unit Length)/(2*Thickness of Pipe))*((8*Thickness of Pipe^2)/(3*Load on Buried Pipe per Unit Length)) to calculate the Diameter of Pipe, The Diameter of Pipe given Tensile End Fiber Stress formula is defined as the value of diameter of pipe when we have prior information of tensile end fiber stress. Diameter of Pipe is denoted by D_pipe symbol.

How to calculate Diameter of Pipe given Tensile End Fiber Stress using this online calculator? To use this online calculator for Diameter of Pipe given Tensile End Fiber Stress, enter Extreme Fiber Stress (S), Load on Buried Pipe per Unit Length (w^') & Thickness of Pipe (t_pipe) and hit the calculate button. Here is how the Diameter of Pipe given Tensile End Fiber Stress calculation can be explained with given input values -> 2.216592 = (20000+(24000)/(2*0.98))*((8*0.98^2)/(3*24000)).

FAQ

What is Diameter of Pipe given Tensile End Fiber Stress?

The Diameter of Pipe given Tensile End Fiber Stress formula is defined as the value of diameter of pipe when we have prior information of tensile end fiber stress and is represented as D_pipe = (S+(w^')/(2*t_pipe))*((8*t_pipe^2)/(3*w^')) or Diameter of Pipe = (Extreme Fiber Stress+(Load on Buried Pipe per Unit Length)/(2*Thickness of Pipe))*((8*Thickness of Pipe^2)/(3*Load on Buried Pipe per Unit Length)). Extreme Fiber Stress is the maximum stress experienced by the outermost fibers of a material or structural element when subjected to external loads, Load on Buried Pipe per Unit Length includes the weight of the pipe, ﬁttings, insulation, ﬂuid in pipe, piping components such as valves, valve operators, ﬂanges, and so on & Thickness of Pipe is the smaller dimension of pipe. It is the distance between the inner and outer or front and back surfaces of the pipe.

How to calculate Diameter of Pipe given Tensile End Fiber Stress?

The Diameter of Pipe given Tensile End Fiber Stress formula is defined as the value of diameter of pipe when we have prior information of tensile end fiber stress is calculated using Diameter of Pipe = (Extreme Fiber Stress+(Load on Buried Pipe per Unit Length)/(2*Thickness of Pipe))*((8*Thickness of Pipe^2)/(3*Load on Buried Pipe per Unit Length)). To calculate Diameter of Pipe given Tensile End Fiber Stress, you need Extreme Fiber Stress (S), Load on Buried Pipe per Unit Length (w^') & Thickness of Pipe (t_pipe). With our tool, you need to enter the respective value for Extreme Fiber Stress, Load on Buried Pipe per Unit Length & Thickness of Pipe and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Diameter of Pipe?

In this formula, Diameter of Pipe uses Extreme Fiber Stress, Load on Buried Pipe per Unit Length & Thickness of Pipe. We can use 2 other way(s) to calculate the same, which is/are as follows -

Diameter of Pipe = (Extreme Fiber Stress-(Load on Buried Pipe per Unit Length)/(2*Thickness of Pipe))*((8*Thickness of Pipe^2)/(3*Load on Buried Pipe per Unit Length))
Diameter of Pipe = Extreme Fiber Stress/((3*Load per Meter Length of Pipe)/(8*Thickness of Pipe^2))

Home

FREE PDFs

🔍 Search