Diameter of Pin of Knuckle Joint given Shear Stress in Eye Calculator

✖Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.ⓘ Outer Diameter of Eye of Knuckle Joint [d_o]			+10% -10%
✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Eye of Knuckle Joint [b]			+10% -10%
✖Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.ⓘ Shear Stress in Eye of Knuckle Joint [τ_e]			+10% -10%

✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Pin of Knuckle Joint given Shear Stress in Eye [d]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Pin Formulas PDF PDF Image

Diameter of Pin of Knuckle Joint given Shear Stress in Eye Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter of Knuckle Pin = Outer Diameter of Eye of Knuckle Joint-Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
d = d_o-L/(b*τ_e)
This formula uses 5 Variables

Variables Used

Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Shear Stress in Eye of Knuckle Joint - (Measured in Pascal) - Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.

STEP 1: Convert Input(s) to Base Unit

Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion here)
Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Thickess of Eye of Knuckle Joint: 44.3 Millimeter --> 0.0443 Meter (Check conversion here)
Shear Stress in Eye of Knuckle Joint: 24 Newton per Square Millimeter --> 24000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d = d_o-L/(b*τ_e) --> 0.08-45000/(0.0443*24000000)

Evaluating ... ...

d = 0.0376749435665914

STEP 3: Convert Result to Output's Unit

0.0376749435665914 Meter -->37.6749435665914 Millimeter (Check conversion here)

FINAL ANSWER

37.6749435665914 ≈ 37.67494 Millimeter <-- Diameter of Knuckle Pin

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Pin » Diameter of Pin of Knuckle Joint given Shear Stress in Eye

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Pin Calculators

Diameter of Pin of Knuckle Joint given Compressive Stress in Fork End Portion of Pin

LaTeX Go Diameter of Knuckle Pin = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Thickess of Fork Eye of Knuckle Joint)

Diameter of Pin of Knuckle Joint given Load and Shear Stress in Pin

LaTeX Go Diameter of Knuckle Pin = sqrt((2*Load on Knuckle Joint)/(pi*Shear Stress in Knuckle Pin))

Diameter of Pin of Knuckle Joint given Compressive Stress in Eye End Portion of Pin

LaTeX Go Diameter of Knuckle Pin = Load on Knuckle Joint/(Compressive Stress in Knuckle Pin*Thickess of Eye of Knuckle Joint)

Length of Pin of Knuckle Joint in Contact with Eye End

LaTeX Go Length of Knuckle Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)

Diameter of Pin of Knuckle Joint given Shear Stress in Eye Formula

LaTeX Go

Diameter of Knuckle Pin = Outer Diameter of Eye of Knuckle Joint-Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
d = d_o-L/(b*τ_e)

What is a knuckle joint?

A knuckle joint is a type of pin joint used to join two components that are loaded in tension. One component has a fork with a hole passing through both sides, forming a double eye, while the other component has a single eye.
The single eye is inserted between the double eyes so that all three holes are concentric and a pin is used to secure the components.
Knuckle joints are often used to connect rods subjected to tension in structures such as roof tiles, bridges, and cranes. The links of a chain are also considered a series of knuckle joints.

How to Calculate Diameter of Pin of Knuckle Joint given Shear Stress in Eye?

Diameter of Pin of Knuckle Joint given Shear Stress in Eye calculator uses Diameter of Knuckle Pin = Outer Diameter of Eye of Knuckle Joint-Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint) to calculate the Diameter of Knuckle Pin, The Diameter of pin of knuckle joint given shear stress in eye is the diameter of the pin used in joining the eye end and the fork of a knuckle joint. Diameter of Knuckle Pin is denoted by d symbol.

How to calculate Diameter of Pin of Knuckle Joint given Shear Stress in Eye using this online calculator? To use this online calculator for Diameter of Pin of Knuckle Joint given Shear Stress in Eye, enter Outer Diameter of Eye of Knuckle Joint (d_o), Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Shear Stress in Eye of Knuckle Joint (τ_e) and hit the calculate button. Here is how the Diameter of Pin of Knuckle Joint given Shear Stress in Eye calculation can be explained with given input values -> 32972.16 = 0.08-45000/(0.0443*24000000).

FAQ

What is Diameter of Pin of Knuckle Joint given Shear Stress in Eye?

The Diameter of pin of knuckle joint given shear stress in eye is the diameter of the pin used in joining the eye end and the fork of a knuckle joint and is represented as d = d_o-L/(b*τ_e) or Diameter of Knuckle Pin = Outer Diameter of Eye of Knuckle Joint-Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint). Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted, Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius & Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.

How to calculate Diameter of Pin of Knuckle Joint given Shear Stress in Eye?

The Diameter of pin of knuckle joint given shear stress in eye is the diameter of the pin used in joining the eye end and the fork of a knuckle joint is calculated using Diameter of Knuckle Pin = Outer Diameter of Eye of Knuckle Joint-Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint). To calculate Diameter of Pin of Knuckle Joint given Shear Stress in Eye, you need Outer Diameter of Eye of Knuckle Joint (d_o), Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Shear Stress in Eye of Knuckle Joint (τ_e). With our tool, you need to enter the respective value for Outer Diameter of Eye of Knuckle Joint, Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Shear Stress in Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Diameter of Knuckle Pin?

In this formula, Diameter of Knuckle Pin uses Outer Diameter of Eye of Knuckle Joint, Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Shear Stress in Eye of Knuckle Joint. We can use 3 other way(s) to calculate the same, which is/are as follows -

Diameter of Knuckle Pin = sqrt((2*Load on Knuckle Joint)/(pi*Shear Stress in Knuckle Pin))
Diameter of Knuckle Pin = Load on Knuckle Joint/(Compressive Stress in Knuckle Pin*Thickess of Eye of Knuckle Joint)
Diameter of Knuckle Pin = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Thickess of Fork Eye of Knuckle Joint)

Home

FREE PDFs

🔍 Search