Diameter of Droplet given Change in Pressure Calculator

✖Surface Tensions is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.ⓘ Surface Tensions [σ_change]			+10% -10%
✖Pressure changes is the difference between the pressure inside the liquid droplet and atmospheric pressure.ⓘ Pressure Changes [Δp]			+10% -10%

✖Diameter of droplet is the length of the longest chord of the liquid droplet.ⓘ Diameter of Droplet given Change in Pressure [d]

⎘ Copy

👎

Formula

✖

Diameter of Droplet given Change in Pressure

Formula

d = 4 \cdot \frac{σ change}{Δp}

Example

9310.714 cm = 4 \cdot \frac{78.21 N/m}{3.36 Pa}

Calculator

LaTeX

Reset

👍

Download Fluid Mechanics Formula PDF PDF Image

Diameter of Droplet given Change in Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter of Droplet = 4*Surface Tensions/Pressure Changes
d = 4*σ_change/Δp
This formula uses 3 Variables

Variables Used

Diameter of Droplet - (Measured in Meter) - Diameter of droplet is the length of the longest chord of the liquid droplet.
Surface Tensions - (Measured in Newton per Meter) - Surface Tensions is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.
Pressure Changes - (Measured in Pascal) - Pressure changes is the difference between the pressure inside the liquid droplet and atmospheric pressure.

STEP 1: Convert Input(s) to Base Unit

Surface Tensions: 78.21 Newton per Meter --> 78.21 Newton per Meter No Conversion Required
Pressure Changes: 3.36 Pascal --> 3.36 Pascal No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d = 4*σ_change/Δp --> 4*78.21/3.36

Evaluating ... ...

d = 93.1071428571428

STEP 3: Convert Result to Output's Unit

93.1071428571428 Meter -->9310.71428571428 Centimeter (Check conversion here)

FINAL ANSWER

9310.71428571428 ≈ 9310.714 Centimeter <-- Diameter of Droplet

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Pressure Relations » Diameter of Droplet given Change in Pressure

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Pressure Relations Calculators

Center of Pressure on Inclined Plane

Go Center of Pressure = Depth of Centroid+(Moment of Inertia*sin(Angle)*sin(Angle))/(Wet Surface Area*Depth of Centroid)

Center of Pressure

Go Center of Pressure = Depth of Centroid+Moment of Inertia/(Wet Surface Area*Depth of Centroid)

Differential Pressure between Two Points

Go Pressure Changes = Specific Weight 1*Height of Column 1-Specific weight 2*Height of Column 2

Absolute Pressure at Height h

Go Absolute pressure = Atmospheric Pressure+Specific weight of liquids*Height Absolute

Diameter of Droplet given Change in Pressure Formula

Diameter of Droplet = 4*Surface Tensions/Pressure Changes
d = 4*σ_change/Δp

Define Pressure Change?

Pressure change is defined as the difference in total pressure between two points of a fluid carrying network. A pressure drop occurs when frictional forces, caused by the resistance to flow, act on a fluid as it flows through the tube. Low velocity will result in lower or no pressure drop.

How to Calculate Diameter of Droplet given Change in Pressure?

Diameter of Droplet given Change in Pressure calculator uses Diameter of Droplet = 4*Surface Tensions/Pressure Changes to calculate the Diameter of Droplet, The Diameter of Droplet given Change in Pressure formula is defined as the longest chord that joins two ends of the droplet. Diameter of Droplet is denoted by d symbol.

How to calculate Diameter of Droplet given Change in Pressure using this online calculator? To use this online calculator for Diameter of Droplet given Change in Pressure, enter Surface Tensions (σ_change) & Pressure Changes (Δp) and hit the calculate button. Here is how the Diameter of Droplet given Change in Pressure calculation can be explained with given input values -> 931071.4 = 4*78.21/3.36.

FAQ

What is Diameter of Droplet given Change in Pressure?

The Diameter of Droplet given Change in Pressure formula is defined as the longest chord that joins two ends of the droplet and is represented as d = 4*σ_change/Δp or Diameter of Droplet = 4*Surface Tensions/Pressure Changes. Surface Tensions is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side & Pressure changes is the difference between the pressure inside the liquid droplet and atmospheric pressure.

How to calculate Diameter of Droplet given Change in Pressure?

The Diameter of Droplet given Change in Pressure formula is defined as the longest chord that joins two ends of the droplet is calculated using Diameter of Droplet = 4*Surface Tensions/Pressure Changes. To calculate Diameter of Droplet given Change in Pressure, you need Surface Tensions (σ_change) & Pressure Changes (Δp). With our tool, you need to enter the respective value for Surface Tensions & Pressure Changes and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Diameter of Droplet?

In this formula, Diameter of Droplet uses Surface Tensions & Pressure Changes. We can use 1 other way(s) to calculate the same, which is/are as follows -

Diameter of Droplet = (8*Surface Tensions)/Pressure Changes

Home

FREE PDFs

🔍 Search