Depth of Water in Well 2 given Drawdown in Well 2 Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depth of Water in Well 2 = Thickness of Aquifer-Drawdown in Well 2
h2 = H-s2
This formula uses 3 Variables
Variables Used
Depth of Water in Well 2 - (Measured in Meter) - Depth of Water in Well 2 refers to the vertical distance from the ground surface to the water level within a well that taps into a confined aquifer.
Thickness of Aquifer - (Measured in Meter) - Thickness of aquifer refers to the vertical distance between the top and bottom boundaries of the water-bearing layer, typically measured from the confining bed above to the confining bed below.
Drawdown in Well 2 - (Measured in Meter) - Drawdown in Well 2 refers to the reduction in water level caused by pumping in a well.
STEP 1: Convert Input(s) to Base Unit
Thickness of Aquifer: 20 Meter --> 20 Meter No Conversion Required
Drawdown in Well 2: 2.136 Meter --> 2.136 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
h2 = H-s2 --> 20-2.136
Evaluating ... ...
h2 = 17.864
STEP 3: Convert Result to Output's Unit
17.864 Meter --> No Conversion Required
FINAL ANSWER
17.864 Meter <-- Depth of Water in Well 2
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2100+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Aquifer Constant And Depth of Water in Well Calculators

Confined Aquifer Discharge given Aquifer Constant
​ LaTeX ​ Go Discharge = (Aquifer Constant*2.72*(Drawdown in Well 1-Drawdown in Well 2))/(log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))
Aquifer Constant
​ LaTeX ​ Go Aquifer Constant = (Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(2.72*(Drawdown in Well 1-Drawdown in Well 2))
Depth of Water in Well 1 given Drawdown in Well 1
​ LaTeX ​ Go Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1
Depth of Water in Well 2 given Drawdown in Well 2
​ LaTeX ​ Go Depth of Water in Well 2 = Thickness of Aquifer-Drawdown in Well 2

Depth of Water in Well 2 given Drawdown in Well 2 Formula

​LaTeX ​Go
Depth of Water in Well 2 = Thickness of Aquifer-Drawdown in Well 2
h2 = H-s2

What is Aquifer ?

An aquifer is a body of rock and/or sediment that holds groundwater. Groundwater is the word used to describe precipitation that has infiltrated the soil beyond the surface and collected in empty spaces underground.

How to Calculate Depth of Water in Well 2 given Drawdown in Well 2?

Depth of Water in Well 2 given Drawdown in Well 2 calculator uses Depth of Water in Well 2 = Thickness of Aquifer-Drawdown in Well 2 to calculate the Depth of Water in Well 2, Depth of Water in Well 2 given Drawdown in Well 2 formula is defined as the vertical distance from the ground surface to the water level in a well, which is affected by the drawdown of water in the well, providing valuable information for groundwater management in confined aquifers. Depth of Water in Well 2 is denoted by h2 symbol.

How to calculate Depth of Water in Well 2 given Drawdown in Well 2 using this online calculator? To use this online calculator for Depth of Water in Well 2 given Drawdown in Well 2, enter Thickness of Aquifer (H) & Drawdown in Well 2 (s2) and hit the calculate button. Here is how the Depth of Water in Well 2 given Drawdown in Well 2 calculation can be explained with given input values -> 17.864 = 20-2.136.

FAQ

What is Depth of Water in Well 2 given Drawdown in Well 2?
Depth of Water in Well 2 given Drawdown in Well 2 formula is defined as the vertical distance from the ground surface to the water level in a well, which is affected by the drawdown of water in the well, providing valuable information for groundwater management in confined aquifers and is represented as h2 = H-s2 or Depth of Water in Well 2 = Thickness of Aquifer-Drawdown in Well 2. Thickness of aquifer refers to the vertical distance between the top and bottom boundaries of the water-bearing layer, typically measured from the confining bed above to the confining bed below & Drawdown in Well 2 refers to the reduction in water level caused by pumping in a well.
How to calculate Depth of Water in Well 2 given Drawdown in Well 2?
Depth of Water in Well 2 given Drawdown in Well 2 formula is defined as the vertical distance from the ground surface to the water level in a well, which is affected by the drawdown of water in the well, providing valuable information for groundwater management in confined aquifers is calculated using Depth of Water in Well 2 = Thickness of Aquifer-Drawdown in Well 2. To calculate Depth of Water in Well 2 given Drawdown in Well 2, you need Thickness of Aquifer (H) & Drawdown in Well 2 (s2). With our tool, you need to enter the respective value for Thickness of Aquifer & Drawdown in Well 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!