Depth of Water in Well 1 given Drawdown in Well 1 Calculator

✖Thickness of aquifer refers to the vertical distance between the top and bottom boundaries of the water-bearing layer, typically measured from the confining bed above to the confining bed below.ⓘ Thickness of Aquifer [H]			+10% -10%
✖Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.ⓘ Drawdown in Well 1 [s₁]			+10% -10%

✖Depth of Water in Well 1 refers to the vertical distance from the ground surface to the water level within a well that taps into a confined aquifer.ⓘ Depth of Water in Well 1 given Drawdown in Well 1 [h₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Confined Aquifers Formulas PDF PDF Image

Depth of Water in Well 1 given Drawdown in Well 1 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1
h₁ = H-s₁
This formula uses 3 Variables

Variables Used

Depth of Water in Well 1 - (Measured in Meter) - Depth of Water in Well 1 refers to the vertical distance from the ground surface to the water level within a well that taps into a confined aquifer.
Thickness of Aquifer - (Measured in Meter) - Thickness of aquifer refers to the vertical distance between the top and bottom boundaries of the water-bearing layer, typically measured from the confining bed above to the confining bed below.
Drawdown in Well 1 - (Measured in Meter) - Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.

STEP 1: Convert Input(s) to Base Unit

Thickness of Aquifer: 20 Meter --> 20 Meter No Conversion Required
Drawdown in Well 1: 2.15 Meter --> 2.15 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h₁ = H-s₁ --> 20-2.15

Evaluating ... ...

h₁ = 17.85

STEP 3: Convert Result to Output's Unit

17.85 Meter --> No Conversion Required

FINAL ANSWER

17.85 Meter <-- Depth of Water in Well 1

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Confined Aquifers » Aquifer Constant And Depth of Water in Well » Depth of Water in Well 1 given Drawdown in Well 1

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Aquifer Constant And Depth of Water in Well Calculators

Confined Aquifer Discharge given Aquifer Constant

LaTeX Go Discharge = (Aquifer Constant*2.72*(Drawdown in Well 1-Drawdown in Well 2))/(log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))

Aquifer Constant

LaTeX Go Aquifer Constant = (Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(2.72*(Drawdown in Well 1-Drawdown in Well 2))

Depth of Water in Well 1 given Drawdown in Well 1

LaTeX Go Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1

Depth of Water in Well 2 given Drawdown in Well 2

LaTeX Go Depth of Water in Well 2 = Thickness of Aquifer-Drawdown in Well 2

Depth of Water in Well 1 given Drawdown in Well 1 Formula

LaTeX Go

Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1
h₁ = H-s₁

What is Aquifer?

An aquifer is a body of rock and/or sediment that holds groundwater. Groundwater is the word used to describe precipitation that has infiltrated the soil beyond the surface and collected in empty spaces underground.

How to Calculate Depth of Water in Well 1 given Drawdown in Well 1?

Depth of Water in Well 1 given Drawdown in Well 1 calculator uses Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1 to calculate the Depth of Water in Well 1, Depth of Water in Well 1 given Drawdown in Well 1 is defined as the vertical distance from the ground surface to the water level in a well, which is affected by the drawdown of water in the same well, providing valuable information for confined aquifer systems. Depth of Water in Well 1 is denoted by h₁ symbol.

How to calculate Depth of Water in Well 1 given Drawdown in Well 1 using this online calculator? To use this online calculator for Depth of Water in Well 1 given Drawdown in Well 1, enter Thickness of Aquifer (H) & Drawdown in Well 1 (s₁) and hit the calculate button. Here is how the Depth of Water in Well 1 given Drawdown in Well 1 calculation can be explained with given input values -> 17.85 = 20-2.15.

FAQ

What is Depth of Water in Well 1 given Drawdown in Well 1?

Depth of Water in Well 1 given Drawdown in Well 1 is defined as the vertical distance from the ground surface to the water level in a well, which is affected by the drawdown of water in the same well, providing valuable information for confined aquifer systems and is represented as h₁ = H-s₁ or Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1. Thickness of aquifer refers to the vertical distance between the top and bottom boundaries of the water-bearing layer, typically measured from the confining bed above to the confining bed below & Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.

How to calculate Depth of Water in Well 1 given Drawdown in Well 1?

Depth of Water in Well 1 given Drawdown in Well 1 is defined as the vertical distance from the ground surface to the water level in a well, which is affected by the drawdown of water in the same well, providing valuable information for confined aquifer systems is calculated using Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1. To calculate Depth of Water in Well 1 given Drawdown in Well 1, you need Thickness of Aquifer (H) & Drawdown in Well 1 (s₁). With our tool, you need to enter the respective value for Thickness of Aquifer & Drawdown in Well 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search