Depression Head given Discharge Calculator

✖Discharge in Well is the rate of flow of a liquid in well.ⓘ Discharge in Well [Q]			+10% -10%
✖Cross-Sectional Area of Well is the the surface area of the interior opening of the well.ⓘ Cross-Sectional Area of Well [A_csw]			+10% -10%
✖Percolation Intensity Coefficient is the constant of the formation around the well.ⓘ Percolation Intensity Coefficient [C]			+10% -10%

✖The Depression Height is defined as height of the bottom of a well above the datum.ⓘ Depression Head given Discharge [H]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Constant Level Pumping Test Formulas PDF PDF Image

Depression Head given Discharge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depression Height = (Discharge in Well/(Cross-Sectional Area of Well*Percolation Intensity Coefficient))
H = (Q/(A_csw*C))
This formula uses 4 Variables

Variables Used

Depression Height - (Measured in Meter) - The Depression Height is defined as height of the bottom of a well above the datum.
Discharge in Well - (Measured in Cubic Meter per Second) - Discharge in Well is the rate of flow of a liquid in well.
Cross-Sectional Area of Well - (Measured in Square Meter) - Cross-Sectional Area of Well is the the surface area of the interior opening of the well.
Percolation Intensity Coefficient - (Measured in Meter per Second) - Percolation Intensity Coefficient is the constant of the formation around the well.

STEP 1: Convert Input(s) to Base Unit

Discharge in Well: 0.99 Cubic Meter per Second --> 0.99 Cubic Meter per Second No Conversion Required
Cross-Sectional Area of Well: 13 Square Meter --> 13 Square Meter No Conversion Required
Percolation Intensity Coefficient: 0.01 Meter per Second --> 0.01 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H = (Q/(A_csw*C)) --> (0.99/(13*0.01))

Evaluating ... ...

H = 7.61538461538461

STEP 3: Convert Result to Output's Unit

7.61538461538461 Meter --> No Conversion Required

FINAL ANSWER

7.61538461538461 ≈ 7.615385 Meter <-- Depression Height

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Yield of an Open Well » Constant Level Pumping Test » Depression Head » Depression Head given Discharge

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Depression Head Calculators

Constant Depression Head given Specific Capacity

LaTeX Go Constant Depression Head = Discharge in Well/(Cross-Sectional Area of Well*Specific Capacity in SI unit)

Constant Depression Head given Specific Capacity for Clay Soil

LaTeX Go Constant Depression Head for Clay Soil = Discharge in Well/(Cross-Sectional Area of Well*0.25)

Constant Depression Head given Specific Capacity for Coarse Sand

LaTeX Go Constant Depression Head for Coarse Sand = Discharge in Well/(Cross-Sectional Area of Well*1)

Constant Depression Head given Specific Capacity for Fine Sand

LaTeX Go Constant Depression Head for Fine Soil = Discharge in Well/(Cross-Sectional Area of Well*0.5)

Depression Head given Discharge Formula

LaTeX Go

Depression Height = (Discharge in Well/(Cross-Sectional Area of Well*Percolation Intensity Coefficient))
H = (Q/(A_csw*C))

What is Discharge?

Discharge in the context of wells, rivers, or any hydraulic system refers to the volume of water flowing out of a particular source over a given period of time. It’s often used to describe the amount of water being produced or released from a well, river, or drainage system. Discharge is a critical factor in evaluating the capacity of a well or river to provide water. For example, higher discharge rates in a well indicate higher water yield, which is important for assessing its productivity and sustainability.

How to Calculate Depression Head given Discharge?

Depression Head given Discharge calculator uses Depression Height = (Discharge in Well/(Cross-Sectional Area of Well*Percolation Intensity Coefficient)) to calculate the Depression Height, The Depression Head given Discharge formula is defined as the calculation of value of depression head when we have prior information of discharge. Depression Height is denoted by H symbol.

How to calculate Depression Head given Discharge using this online calculator? To use this online calculator for Depression Head given Discharge, enter Discharge in Well (Q), Cross-Sectional Area of Well (A_csw) & Percolation Intensity Coefficient (C) and hit the calculate button. Here is how the Depression Head given Discharge calculation can be explained with given input values -> 7.769231 = (0.99/(13*0.01)).

FAQ

What is Depression Head given Discharge?

The Depression Head given Discharge formula is defined as the calculation of value of depression head when we have prior information of discharge and is represented as H = (Q/(A_csw*C)) or Depression Height = (Discharge in Well/(Cross-Sectional Area of Well*Percolation Intensity Coefficient)). Discharge in Well is the rate of flow of a liquid in well, Cross-Sectional Area of Well is the the surface area of the interior opening of the well & Percolation Intensity Coefficient is the constant of the formation around the well.

How to calculate Depression Head given Discharge?

The Depression Head given Discharge formula is defined as the calculation of value of depression head when we have prior information of discharge is calculated using Depression Height = (Discharge in Well/(Cross-Sectional Area of Well*Percolation Intensity Coefficient)). To calculate Depression Head given Discharge, you need Discharge in Well (Q), Cross-Sectional Area of Well (A_csw) & Percolation Intensity Coefficient (C). With our tool, you need to enter the respective value for Discharge in Well, Cross-Sectional Area of Well & Percolation Intensity Coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search