Density of Material given Quantity of Scrap Produced Calculator

✖Weight of Load Scrap is the weight of one wheel or axle.ⓘ Weight of Load Scrap [W_load]			+10% -10%
✖Bank in Scraper is computed in terms of volume.ⓘ Bank in Scraper [B]			+10% -10%

✖Density of Material in Scraper Production is ratio of mass of material to its volume.ⓘ Density of Material given Quantity of Scrap Produced [ρ_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Density of Material given Quantity of Scrap Produced Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density of Material in Scraper Production = (Weight of Load Scrap/Bank in Scraper)
ρ_m = (W_load/B)
This formula uses 3 Variables

Variables Used

Density of Material in Scraper Production - (Measured in Kilogram per Cubic Meter) - Density of Material in Scraper Production is ratio of mass of material to its volume.
Weight of Load Scrap - (Measured in Kilogram) - Weight of Load Scrap is the weight of one wheel or axle.
Bank in Scraper - (Measured in Cubic Meter) - Bank in Scraper is computed in terms of volume.

STEP 1: Convert Input(s) to Base Unit

Weight of Load Scrap: 10.34 Kilogram --> 10.34 Kilogram No Conversion Required
Bank in Scraper: 9.8 Cubic Meter --> 9.8 Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_m = (W_load/B) --> (10.34/9.8)

Evaluating ... ...

ρ_m = 1.05510204081633

STEP 3: Convert Result to Output's Unit

1.05510204081633 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

1.05510204081633 ≈ 1.055102 Kilogram per Cubic Meter <-- Density of Material in Scraper Production

(Calculation completed in 00.021 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Density of Material given Quantity of Scrap Produced

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Density of Material given Quantity of Scrap Produced Formula

LaTeX Go

Density of Material in Scraper Production = (Weight of Load Scrap/Bank in Scraper)
ρ_m = (W_load/B)

What is Scrap?

Scrap consists of recyclable materials left over from product manufacturing and consumption, such as parts of vehicles, building supplies, and surplus materials. Unlike waste, scrap has monetary value, especially recovered metals, and non-metallic materials are also recovered for recycling.

How to Calculate Density of Material given Quantity of Scrap Produced?

Density of Material given Quantity of Scrap Produced calculator uses Density of Material in Scraper Production = (Weight of Load Scrap/Bank in Scraper) to calculate the Density of Material in Scraper Production, The Density of Material given Quantity of Scrap Produced is defined as the density of material which is a ratio of weight of material to volume of material. Density of Material in Scraper Production is denoted by ρ_m symbol.

How to calculate Density of Material given Quantity of Scrap Produced using this online calculator? To use this online calculator for Density of Material given Quantity of Scrap Produced, enter Weight of Load Scrap (W_load) & Bank in Scraper (B) and hit the calculate button. Here is how the Density of Material given Quantity of Scrap Produced calculation can be explained with given input values -> 1.055102 = (10.34/9.8).

FAQ

What is Density of Material given Quantity of Scrap Produced?

The Density of Material given Quantity of Scrap Produced is defined as the density of material which is a ratio of weight of material to volume of material and is represented as ρ_m = (W_load/B) or Density of Material in Scraper Production = (Weight of Load Scrap/Bank in Scraper). Weight of Load Scrap is the weight of one wheel or axle & Bank in Scraper is computed in terms of volume.

How to calculate Density of Material given Quantity of Scrap Produced?

The Density of Material given Quantity of Scrap Produced is defined as the density of material which is a ratio of weight of material to volume of material is calculated using Density of Material in Scraper Production = (Weight of Load Scrap/Bank in Scraper). To calculate Density of Material given Quantity of Scrap Produced, you need Weight of Load Scrap (W_load) & Bank in Scraper (B). With our tool, you need to enter the respective value for Weight of Load Scrap & Bank in Scraper and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search