Density of material given constant at boundary condition for circular disc Calculator

✖Constant at boundary condition is value obtained for stress in solid disc.ⓘ Constant at boundary condition [C₁]			+10% -10%
✖The Angular Velocity refers to how fast an object rotates or revolves relative to another point, i.e. how fast the angular position or orientation of an object changes with time.ⓘ Angular Velocity [ω]			+10% -10%
✖Outer Radius Disc is the radius of the larger of the two concentric circles that form its boundary.ⓘ Outer Radius Disc [r_outer]			+10% -10%
✖Poisson's Ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.1 and 0.5.ⓘ Poisson's Ratio [𝛎]			+10% -10%

✖Density Of Disc shows the denseness of disc in a specific given area. This is taken as mass per unit volume of a given disc.ⓘ Density of material given constant at boundary condition for circular disc [ρ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Density of material given constant at boundary condition for circular disc Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density Of Disc = (8*Constant at boundary condition)/((Angular Velocity^2)*(Outer Radius Disc^2)*(3+Poisson's Ratio))
ρ = (8*C₁)/((ω^2)*(r_outer^2)*(3+𝛎))
This formula uses 5 Variables

Variables Used

Density Of Disc - (Measured in Kilogram per Cubic Meter) - Density Of Disc shows the denseness of disc in a specific given area. This is taken as mass per unit volume of a given disc.
Constant at boundary condition - Constant at boundary condition is value obtained for stress in solid disc.
Angular Velocity - (Measured in Radian per Second) - The Angular Velocity refers to how fast an object rotates or revolves relative to another point, i.e. how fast the angular position or orientation of an object changes with time.
Outer Radius Disc - (Measured in Meter) - Outer Radius Disc is the radius of the larger of the two concentric circles that form its boundary.
Poisson's Ratio - Poisson's Ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.1 and 0.5.

STEP 1: Convert Input(s) to Base Unit

Constant at boundary condition: 300 --> No Conversion Required
Angular Velocity: 11.2 Radian per Second --> 11.2 Radian per Second No Conversion Required
Outer Radius Disc: 900 Millimeter --> 0.9 Meter (Check conversion here)
Poisson's Ratio: 0.3 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ = (8*C₁)/((ω^2)*(r_outer^2)*(3+𝛎)) --> (8*300)/((11.2^2)*(0.9^2)*(3+0.3))

Evaluating ... ...

ρ = 7.15774525298335

STEP 3: Convert Result to Output's Unit

7.15774525298335 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

7.15774525298335 ≈ 7.157745 Kilogram per Cubic Meter <-- Density Of Disc

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Rotating Disc And Cylinder » Expression for Stresses in Solid Disc » Mechanical » Density of Disc » Density of material given constant at boundary condition for circular disc

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Density of Disc Calculators

Density of material given Circumferential stress in solid disc

LaTeX Go Density Of Disc = (((Constant at boundary condition/2)-Circumferential Stress)*8)/((Angular Velocity^2)*(Disc Radius^2)*((3*Poisson's Ratio)+1))

Density of disc material given Radial stress in solid disc and outer radius

LaTeX Go Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*((Outer Radius Disc^2)-(Radius of Element^2))))

Density of material given constant at boundary condition for circular disc

LaTeX Go Density Of Disc = (8*Constant at boundary condition)/((Angular Velocity^2)*(Outer Radius Disc^2)*(3+Poisson's Ratio))

Density of material given Circumferential stress at center of solid disc

LaTeX Go Density Of Disc = ((8*Circumferential Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2)))

Density of material given constant at boundary condition for circular disc Formula

LaTeX Go

Density Of Disc = (8*Constant at boundary condition)/((Angular Velocity^2)*(Outer Radius Disc^2)*(3+Poisson's Ratio))
ρ = (8*C₁)/((ω^2)*(r_outer^2)*(3+𝛎))

What is radial and tangential stress?

The “Hoop Stress” or “Tangential Stress” acts on a line perpendicular to the “longitudinal “and the “radial stress;” this stress attempts to separate the pipe wall in the circumferential direction. This stress is caused by internal pressure.

How to Calculate Density of material given constant at boundary condition for circular disc?

Density of material given constant at boundary condition for circular disc calculator uses Density Of Disc = (8*Constant at boundary condition)/((Angular Velocity^2)*(Outer Radius Disc^2)*(3+Poisson's Ratio)) to calculate the Density Of Disc, The Density of material given constant at boundary condition for circular disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water). Density Of Disc is denoted by ρ symbol.

How to calculate Density of material given constant at boundary condition for circular disc using this online calculator? To use this online calculator for Density of material given constant at boundary condition for circular disc, enter Constant at boundary condition (C₁), Angular Velocity (ω), Outer Radius Disc (r_outer) & Poisson's Ratio (𝛎) and hit the calculate button. Here is how the Density of material given constant at boundary condition for circular disc calculation can be explained with given input values -> 7.157745 = (8*300)/((11.2^2)*(0.9^2)*(3+0.3)).

FAQ

What is Density of material given constant at boundary condition for circular disc?

The Density of material given constant at boundary condition for circular disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water) and is represented as ρ = (8*C₁)/((ω^2)*(r_outer^2)*(3+𝛎)) or Density Of Disc = (8*Constant at boundary condition)/((Angular Velocity^2)*(Outer Radius Disc^2)*(3+Poisson's Ratio)). Constant at boundary condition is value obtained for stress in solid disc, The Angular Velocity refers to how fast an object rotates or revolves relative to another point, i.e. how fast the angular position or orientation of an object changes with time, Outer Radius Disc is the radius of the larger of the two concentric circles that form its boundary & Poisson's Ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.1 and 0.5.

How to calculate Density of material given constant at boundary condition for circular disc?

The Density of material given constant at boundary condition for circular disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water) is calculated using Density Of Disc = (8*Constant at boundary condition)/((Angular Velocity^2)*(Outer Radius Disc^2)*(3+Poisson's Ratio)). To calculate Density of material given constant at boundary condition for circular disc, you need Constant at boundary condition (C₁), Angular Velocity (ω), Outer Radius Disc (r_outer) & Poisson's Ratio (𝛎). With our tool, you need to enter the respective value for Constant at boundary condition, Angular Velocity, Outer Radius Disc & Poisson's Ratio and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Density Of Disc?

In this formula, Density Of Disc uses Constant at boundary condition, Angular Velocity, Outer Radius Disc & Poisson's Ratio. We can use 3 other way(s) to calculate the same, which is/are as follows -

Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*((Outer Radius Disc^2)-(Radius of Element^2))))
Density Of Disc = ((8*Circumferential Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2)))
Density Of Disc = (((Constant at boundary condition/2)-Circumferential Stress)*8)/((Angular Velocity^2)*(Disc Radius^2)*((3*Poisson's Ratio)+1))

Home

FREE PDFs

🔍 Search