Density of Manometric Liquid given Venturi Head Calculator

✖The Specific Weight of Liquid refers to the weight per unit volume of that substance.ⓘ Specific Weight of Liquid [γ_f]			+10% -10%
✖Venturi headt is the difference between pressure head at inlet and pressure head at the throat.ⓘ Venturi Head [h_venturi]			+10% -10%
✖Length of Venturimeter is the measurement or extent of something from end to end.ⓘ Length of Venturimeter [L]			+10% -10%

✖Weight per unit Volume of Manometer Fluid is obtained as the product of the density of manometric fluid and acceleration of gravity g.ⓘ Density of Manometric Liquid given Venturi Head [𝑤]

⎘ Copy

👎

Formula

✖

Density of Manometric Liquid given Venturi Head

Formula

𝑤 = γ f \cdot (\frac{h venturi}{L} + 1)

Example

9888.48 N/m³ = 9.81 kN/m³ \cdot (\frac{24 mm}{3 m} + 1)

Calculator

LaTeX

Reset

👍

Download Hydraulics and Waterworks Formula PDF PDF Image

Density of Manometric Liquid given Venturi Head Solution

STEP 0: Pre-Calculation Summary

Formula Used

Weight per unit Volume of Manometer Fluid = Specific Weight of Liquid*(Venturi Head/Length of Venturimeter+1)
𝑤 = γ_f*(h_venturi/L+1)
This formula uses 4 Variables

Variables Used

Weight per unit Volume of Manometer Fluid - (Measured in Newton per Cubic Meter) - Weight per unit Volume of Manometer Fluid is obtained as the product of the density of manometric fluid and acceleration of gravity g.
Specific Weight of Liquid - (Measured in Newton per Cubic Meter) - The Specific Weight of Liquid refers to the weight per unit volume of that substance.
Venturi Head - (Measured in Meter) - Venturi headt is the difference between pressure head at inlet and pressure head at the throat.
Length of Venturimeter - (Measured in Meter) - Length of Venturimeter is the measurement or extent of something from end to end.

STEP 1: Convert Input(s) to Base Unit

Specific Weight of Liquid: 9.81 Kilonewton per Cubic Meter --> 9810 Newton per Cubic Meter (Check conversion here)
Venturi Head: 24 Millimeter --> 0.024 Meter (Check conversion here)
Length of Venturimeter: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

𝑤 = γ_f*(h_venturi/L+1) --> 9810*(0.024/3+1)

Evaluating ... ...

𝑤 = 9888.48

STEP 3: Convert Result to Output's Unit

9888.48 Newton per Cubic Meter --> No Conversion Required

FINAL ANSWER

9888.48 Newton per Cubic Meter <-- Weight per unit Volume of Manometer Fluid

(Calculation completed in 00.010 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Equations of Motion and Energy Equation » Venturimeter » Density of Manometric Liquid given Venturi Head

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Venturimeter Calculators

Theoretical Discharge through Pipe

Go Theoretical Discharge = (Cross Section Area 1*Cross Section Area 2*(sqrt(2*[g]*Venturi Head)))/(sqrt((Cross Section Area 1)^(2)-(Cross Section Area 2)^(2)))

Venturi Head given Theoretical Discharge through Pipe

Go Venturi Head = ((Theoretical Discharge/(Cross Section Area 1*Cross Section Area 2))*(sqrt(((Cross Section Area 1)^2-(Cross Section Area 2)^2)/(2*[g]))))^2

Inlet Area given Theoretical Discharge

Go Cross Section Area 1 = sqrt(((Theoretical Discharge*Cross Section Area 2)^2)/((Theoretical Discharge)^2-(Cross Section Area 2^2*2*[g]*Venturi Head)))

Throat area given Theoretical Discharge

Go Cross Section Area 2 = sqrt((Cross Section Area 1*Theoretical Discharge)^2/((Cross Section Area 1^2*2*[g]*Venturi Head)+Theoretical Discharge^2))

Density of Manometric Liquid given Venturi Head Formula

Weight per unit Volume of Manometer Fluid = Specific Weight of Liquid*(Venturi Head/Length of Venturimeter+1)
𝑤 = γ_f*(h_venturi/L+1)

What is Manometer?

A manometer is a device that we use to measure the pressure of the pipelines (cab be of gas, water, liquid, etc.) Also, it is usually referred to as a U-shaped tube that is filled with a liquid.

How to Calculate Density of Manometric Liquid given Venturi Head?

Density of Manometric Liquid given Venturi Head calculator uses Weight per unit Volume of Manometer Fluid = Specific Weight of Liquid*(Venturi Head/Length of Venturimeter+1) to calculate the Weight per unit Volume of Manometer Fluid, The Density of Manometric Liquid given Venturi Head s defined as density of measuring fluid used in manometer. Weight per unit Volume of Manometer Fluid is denoted by 𝑤 symbol.

How to calculate Density of Manometric Liquid given Venturi Head using this online calculator? To use this online calculator for Density of Manometric Liquid given Venturi Head, enter Specific Weight of Liquid (γ_f), Venturi Head (h_venturi) & Length of Venturimeter (L) and hit the calculate button. Here is how the Density of Manometric Liquid given Venturi Head calculation can be explained with given input values -> 9888.48 = 9810*(0.024/3+1).

FAQ

What is Density of Manometric Liquid given Venturi Head?

The Density of Manometric Liquid given Venturi Head s defined as density of measuring fluid used in manometer and is represented as 𝑤 = γ_f*(h_venturi/L+1) or Weight per unit Volume of Manometer Fluid = Specific Weight of Liquid*(Venturi Head/Length of Venturimeter+1). The Specific Weight of Liquid refers to the weight per unit volume of that substance, Venturi headt is the difference between pressure head at inlet and pressure head at the throat & Length of Venturimeter is the measurement or extent of something from end to end.

How to calculate Density of Manometric Liquid given Venturi Head?

The Density of Manometric Liquid given Venturi Head s defined as density of measuring fluid used in manometer is calculated using Weight per unit Volume of Manometer Fluid = Specific Weight of Liquid*(Venturi Head/Length of Venturimeter+1). To calculate Density of Manometric Liquid given Venturi Head, you need Specific Weight of Liquid (γ_f), Venturi Head (h_venturi) & Length of Venturimeter (L). With our tool, you need to enter the respective value for Specific Weight of Liquid, Venturi Head & Length of Venturimeter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search