Density of Lubricating Oil in Terms of Temperature Rise Variable Calculator

✖The Temperature Rise Variable is defined as the ratio of the product of density, specific, and rise in temperature to unit bearing pressure.ⓘ Temperature Rise Variable [TRV]			+10% -10%
✖Unit bearing pressure for bearing is the average pressure acting on the contact surface of the bearing.ⓘ Unit bearing pressure for bearing [p]			+10% -10%
✖Specific heat of bearing oil is the amount of heat per unit mass required to raise the temperature of the oil by one degree Celsius.ⓘ Specific heat of bearing oil [C_p]			+10% -10%
✖Temperature rise of bearing lubricant is defined as the increase in the temperature of the lubricant as the bearing or the component rotates.ⓘ Temperature Rise of Bearing Lubricant [Δt_r]			+10% -10%

✖The Density of Lubricating Oil is defined as the mass of a unit volume of oil.ⓘ Density of Lubricating Oil in Terms of Temperature Rise Variable [ρ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Viscosity and Density of Lubricant Formulas PDF PDF Image

Density of Lubricating Oil in Terms of Temperature Rise Variable Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density of Lubricating Oil = Temperature Rise Variable*Unit bearing pressure for bearing/(Specific heat of bearing oil*Temperature Rise of Bearing Lubricant)
ρ = TRV*p/(C_p*Δt_r)
This formula uses 5 Variables

Variables Used

Density of Lubricating Oil - (Measured in Kilogram per Cubic Meter) - The Density of Lubricating Oil is defined as the mass of a unit volume of oil.
Temperature Rise Variable - The Temperature Rise Variable is defined as the ratio of the product of density, specific, and rise in temperature to unit bearing pressure.
Unit bearing pressure for bearing - (Measured in Pascal) - Unit bearing pressure for bearing is the average pressure acting on the contact surface of the bearing.
Specific heat of bearing oil - (Measured in Joule per Kilogram per K) - Specific heat of bearing oil is the amount of heat per unit mass required to raise the temperature of the oil by one degree Celsius.
Temperature Rise of Bearing Lubricant - (Measured in Kelvin) - Temperature rise of bearing lubricant is defined as the increase in the temperature of the lubricant as the bearing or the component rotates.

STEP 1: Convert Input(s) to Base Unit

Temperature Rise Variable: 21 --> No Conversion Required
Unit bearing pressure for bearing: 0.96 Megapascal --> 960000 Pascal (Check conversion here)
Specific heat of bearing oil: 1.76 Kilojoule per Kilogram per Celcius --> 1760 Joule per Kilogram per K (Check conversion here)
Temperature Rise of Bearing Lubricant: 13.2 Degree Celsius --> 13.2 Kelvin (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ = TRV*p/(C_p*Δt_r) --> 21*960000/(1760*13.2)

Evaluating ... ...

ρ = 867.768595041322

STEP 3: Convert Result to Output's Unit

867.768595041322 Kilogram per Cubic Meter -->0.867768595041322 Gram per Cubic Centimeter (Check conversion here)

FINAL ANSWER

0.867768595041322 ≈ 0.867769 Gram per Cubic Centimeter <-- Density of Lubricating Oil

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Sliding Contact Bearing » Viscosity and Density of Lubricant » Density of Lubricating Oil in Terms of Temperature Rise Variable

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Viscosity and Density of Lubricant Calculators

Area of moving plate of sliding contact bearing given absolute viscosity

LaTeX Go Area of Moving Plate on Oil = Tangential force on moving plate*Oil Film Thickness/(Dynamic Viscosity of Oil*Velocity of Moving Plate on Oil)

Velocity of Moving Plate in Terms of Absolute Viscosity

LaTeX Go Velocity of Moving Plate on Oil = Tangential force on moving plate*Oil Film Thickness/(Dynamic Viscosity of Oil*Area of Moving Plate on Oil)

Absolute Viscosity of Oil in Terms of Tangential Force

LaTeX Go Dynamic Viscosity of Oil = Tangential force on moving plate*Oil Film Thickness/(Area of Moving Plate on Oil*Velocity of Moving Plate on Oil)

Kinematic Viscosity in Centi-Stokes in Terms of Viscosity in Saybolt's Unversal Seconds

LaTeX Go Kinematic Viscosity in Centi-Stokes = (0.22*Viscosity in Saybolt Universal Seconds)-(180/Viscosity in Saybolt Universal Seconds)

Density of Lubricating Oil in Terms of Temperature Rise Variable Formula

LaTeX Go

Density of Lubricating Oil = Temperature Rise Variable*Unit bearing pressure for bearing/(Specific heat of bearing oil*Temperature Rise of Bearing Lubricant)
ρ = TRV*p/(C_p*Δt_r)

What is Sliding Contact Bearing?

The sliding contact bearings in which the sliding action is along the circumference of a circle or an arc of a circle and carrying radial loads are known as journal or sleeve bearings.

How to Calculate Density of Lubricating Oil in Terms of Temperature Rise Variable?

Density of Lubricating Oil in Terms of Temperature Rise Variable calculator uses Density of Lubricating Oil = Temperature Rise Variable*Unit bearing pressure for bearing/(Specific heat of bearing oil*Temperature Rise of Bearing Lubricant) to calculate the Density of Lubricating Oil, Density of Lubricating Oil in Terms of Temperature Rise Variable formula is defined as a relationship that describes how the density of lubricating oil changes in response to temperature variations, which is crucial for optimizing lubrication in mechanical systems. Density of Lubricating Oil is denoted by ρ symbol.

How to calculate Density of Lubricating Oil in Terms of Temperature Rise Variable using this online calculator? To use this online calculator for Density of Lubricating Oil in Terms of Temperature Rise Variable, enter Temperature Rise Variable (TRV), Unit bearing pressure for bearing (p), Specific heat of bearing oil (C_p) & Temperature Rise of Bearing Lubricant (Δt_r) and hit the calculate button. Here is how the Density of Lubricating Oil in Terms of Temperature Rise Variable calculation can be explained with given input values -> 0.000868 = 21*960000/(1760*13.2).

FAQ

What is Density of Lubricating Oil in Terms of Temperature Rise Variable?

Density of Lubricating Oil in Terms of Temperature Rise Variable formula is defined as a relationship that describes how the density of lubricating oil changes in response to temperature variations, which is crucial for optimizing lubrication in mechanical systems and is represented as ρ = TRV*p/(C_p*Δt_r) or Density of Lubricating Oil = Temperature Rise Variable*Unit bearing pressure for bearing/(Specific heat of bearing oil*Temperature Rise of Bearing Lubricant). The Temperature Rise Variable is defined as the ratio of the product of density, specific, and rise in temperature to unit bearing pressure, Unit bearing pressure for bearing is the average pressure acting on the contact surface of the bearing, Specific heat of bearing oil is the amount of heat per unit mass required to raise the temperature of the oil by one degree Celsius & Temperature rise of bearing lubricant is defined as the increase in the temperature of the lubricant as the bearing or the component rotates.

How to calculate Density of Lubricating Oil in Terms of Temperature Rise Variable?

Density of Lubricating Oil in Terms of Temperature Rise Variable formula is defined as a relationship that describes how the density of lubricating oil changes in response to temperature variations, which is crucial for optimizing lubrication in mechanical systems is calculated using Density of Lubricating Oil = Temperature Rise Variable*Unit bearing pressure for bearing/(Specific heat of bearing oil*Temperature Rise of Bearing Lubricant). To calculate Density of Lubricating Oil in Terms of Temperature Rise Variable, you need Temperature Rise Variable (TRV), Unit bearing pressure for bearing (p), Specific heat of bearing oil (C_p) & Temperature Rise of Bearing Lubricant (Δt_r). With our tool, you need to enter the respective value for Temperature Rise Variable, Unit bearing pressure for bearing, Specific heat of bearing oil & Temperature Rise of Bearing Lubricant and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Density of Lubricating Oil?

In this formula, Density of Lubricating Oil uses Temperature Rise Variable, Unit bearing pressure for bearing, Specific heat of bearing oil & Temperature Rise of Bearing Lubricant. We can use 1 other way(s) to calculate the same, which is/are as follows -

Density of Lubricating Oil = Dynamic Viscosity of Lubricant/Kinematic Viscosity of Lubricant Oil

Home

FREE PDFs

🔍 Search