Density of Fluid considering Velocity at Outlet of Orifice Calculator

✖The Specific Heat Ratio is the ratio of the heat capacity at constant pressure to heat capacity at constant volume of the flowing fluid for non-viscous and compressible flow.ⓘ Specific Heat Ratio [y]			+10% -10%
✖Pressure at Nozzle Inlet is the pressure of the fluid at the inlet point of the orifice or the nozzle.ⓘ Pressure at Nozzle Inlet [P₁]			+10% -10%
✖The Velocity of Flow at Nozzle Outlet is velocity of the fluid at the outlet of the orifice or the nozzle.ⓘ Velocity of Flow at Nozzle Outlet [V_f]			+10% -10%

✖Density of Air Medium shows the denseness of the air. This is taken as mass per unit volume.ⓘ Density of Fluid considering Velocity at Outlet of Orifice [ρ_a]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Fluid Mechanics Formula PDF PDF Image

Density of Fluid considering Velocity at Outlet of Orifice Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density of Air Medium = (2*Specific Heat Ratio*Pressure at Nozzle Inlet)/(Velocity of Flow at Nozzle Outlet^2*(Specific Heat Ratio+1))
ρ_a = (2*y*P₁)/(V_f^2*(y+1))
This formula uses 4 Variables

Variables Used

Density of Air Medium - (Measured in Kilogram per Cubic Meter) - Density of Air Medium shows the denseness of the air. This is taken as mass per unit volume.
Specific Heat Ratio - The Specific Heat Ratio is the ratio of the heat capacity at constant pressure to heat capacity at constant volume of the flowing fluid for non-viscous and compressible flow.
Pressure at Nozzle Inlet - (Measured in Pascal) - Pressure at Nozzle Inlet is the pressure of the fluid at the inlet point of the orifice or the nozzle.
Velocity of Flow at Nozzle Outlet - (Measured in Meter per Second) - The Velocity of Flow at Nozzle Outlet is velocity of the fluid at the outlet of the orifice or the nozzle.

STEP 1: Convert Input(s) to Base Unit

Specific Heat Ratio: 1.4 --> No Conversion Required
Pressure at Nozzle Inlet: 69661.11 Newton per Square Meter --> 69661.11 Pascal (Check conversion here)
Velocity of Flow at Nozzle Outlet: 251 Meter per Second --> 251 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_a = (2*y*P₁)/(V_f^2*(y+1)) --> (2*1.4*69661.11)/(251^2*(1.4+1))

Evaluating ... ...

ρ_a = 1.29000007936382

STEP 3: Convert Result to Output's Unit

1.29000007936382 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

1.29000007936382 ≈ 1.29 Kilogram per Cubic Meter <-- Density of Air Medium

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Fluid Mechanics » Flow Characteristics » Compressible Flow » Mechanical » Multiphase Compressible Flow » Density of Fluid considering Velocity at Outlet of Orifice

Credits

Created by Maiarutselvan V

PSG College of Technology (PSGCT), Coimbatore

Maiarutselvan V has created this Calculator and 300+ more calculators!

Verified by Sanjay Krishna

Amrita School of Engineering (ASE), Vallikavu

Sanjay Krishna has verified this Calculator and 200+ more calculators!

< Multiphase Compressible Flow Calculators

Pressure at Inlet of Tank or Vessel considering Compressible Fluid Flow

LaTeX Go Pressure of Still Air = Stagnation Pressure in Compressible Flow/((1+(Specific Heat Ratio-1)/2*Mach Number For Compressible Flow^2)^(Specific Heat Ratio/(Specific Heat Ratio-1)))

Density of Fluid considering Velocity at Outlet of Orifice

LaTeX Go Density of Air Medium = (2*Specific Heat Ratio*Pressure at Nozzle Inlet)/(Velocity of Flow at Nozzle Outlet^2*(Specific Heat Ratio+1))

Pressure at Inlet considering Maximum Flow Rate of Fluid

LaTeX Go Pressure at Nozzle Inlet = (Specific Heat Ratio+1)/(2*Specific Heat Ratio)*Density of Air Medium*Velocity of Flow at Nozzle Outlet^2

Absolute Temperature for Velocity of Sound Wave in Isothermal Process

LaTeX Go Absolute Temperature = (Velocity of Sound in Medium^2)/Gas Constant in Compressible Flow

Density of Fluid considering Velocity at Outlet of Orifice Formula

LaTeX Go

Density of Air Medium = (2*Specific Heat Ratio*Pressure at Nozzle Inlet)/(Velocity of Flow at Nozzle Outlet^2*(Specific Heat Ratio+1))
ρ_a = (2*y*P₁)/(V_f^2*(y+1))

What is a nozzle?

A nozzle is a device designed to control the direction or characteristics of a fluid flow as it exits an enclosed chamber or pipe. A nozzle is often a pipe or tube of varying cross-sectional area, and it can be used to direct or modify the flow of a fluid.

Does nozzle increase velocity?

Nozzles are frequently used to control the rate of flow, speed, direction, mass, shape, and/or the pressure of the stream that emerges from them. In a nozzle, the velocity of fluid increases at the expense of its pressure energy.

How to Calculate Density of Fluid considering Velocity at Outlet of Orifice?

Density of Fluid considering Velocity at Outlet of Orifice calculator uses Density of Air Medium = (2*Specific Heat Ratio*Pressure at Nozzle Inlet)/(Velocity of Flow at Nozzle Outlet^2*(Specific Heat Ratio+1)) to calculate the Density of Air Medium, Density of Fluid considering Velocity at Outlet of Orifice states that the velocity of the fluid flowing out of an orifice is influenced by the fluid density, the height of the fluid column above the orifice, and the acceleration due to gravity. Density of Air Medium is denoted by ρ_a symbol.

How to calculate Density of Fluid considering Velocity at Outlet of Orifice using this online calculator? To use this online calculator for Density of Fluid considering Velocity at Outlet of Orifice, enter Specific Heat Ratio (y), Pressure at Nozzle Inlet (P₁) & Velocity of Flow at Nozzle Outlet (V_f) and hit the calculate button. Here is how the Density of Fluid considering Velocity at Outlet of Orifice calculation can be explained with given input values -> 1.296276 = (2*1.4*69661.11)/(251^2*(1.4+1)).

FAQ

What is Density of Fluid considering Velocity at Outlet of Orifice?

Density of Fluid considering Velocity at Outlet of Orifice states that the velocity of the fluid flowing out of an orifice is influenced by the fluid density, the height of the fluid column above the orifice, and the acceleration due to gravity and is represented as ρ_a = (2*y*P₁)/(V_f^2*(y+1)) or Density of Air Medium = (2*Specific Heat Ratio*Pressure at Nozzle Inlet)/(Velocity of Flow at Nozzle Outlet^2*(Specific Heat Ratio+1)). The Specific Heat Ratio is the ratio of the heat capacity at constant pressure to heat capacity at constant volume of the flowing fluid for non-viscous and compressible flow, Pressure at Nozzle Inlet is the pressure of the fluid at the inlet point of the orifice or the nozzle & The Velocity of Flow at Nozzle Outlet is velocity of the fluid at the outlet of the orifice or the nozzle.

How to calculate Density of Fluid considering Velocity at Outlet of Orifice?

Density of Fluid considering Velocity at Outlet of Orifice states that the velocity of the fluid flowing out of an orifice is influenced by the fluid density, the height of the fluid column above the orifice, and the acceleration due to gravity is calculated using Density of Air Medium = (2*Specific Heat Ratio*Pressure at Nozzle Inlet)/(Velocity of Flow at Nozzle Outlet^2*(Specific Heat Ratio+1)). To calculate Density of Fluid considering Velocity at Outlet of Orifice, you need Specific Heat Ratio (y), Pressure at Nozzle Inlet (P₁) & Velocity of Flow at Nozzle Outlet (V_f). With our tool, you need to enter the respective value for Specific Heat Ratio, Pressure at Nozzle Inlet & Velocity of Flow at Nozzle Outlet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search