Density Influence Calculator

✖Density Current Velocity dependent upon the filling current component.ⓘ Density Current Velocity [V_D]			+10% -10%
✖Filling Current Velocity dependent upon the filling current component are horizontal movements which range in magnitude.ⓘ Filling Current Velocity [V_f]			+10% -10%
✖Time Interval over which the Density Difference exists.ⓘ Time Interval [T_D]			+10% -10%
✖Length of Harbor dependent upon the filling current component.ⓘ Length of Harbor [L]			+10% -10%

✖Density Influence influencing Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.ⓘ Density Influence [α_D]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Density Currents in Harbors Formulas PDF PDF Image

Density Influence Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density Influence = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Length of Harbor)
α_D = (V_D-V_f)*T_D/(2*L)
This formula uses 5 Variables

Variables Used

Density Influence - Density Influence influencing Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.
Density Current Velocity - (Measured in Meter per Second) - Density Current Velocity dependent upon the filling current component.
Filling Current Velocity - (Measured in Meter per Second) - Filling Current Velocity dependent upon the filling current component are horizontal movements which range in magnitude.
Time Interval - (Measured in Second) - Time Interval over which the Density Difference exists.
Length of Harbor - (Measured in Meter) - Length of Harbor dependent upon the filling current component.

STEP 1: Convert Input(s) to Base Unit

Density Current Velocity: 25 Meter per Second --> 25 Meter per Second No Conversion Required
Filling Current Velocity: 7 Meter per Second --> 7 Meter per Second No Conversion Required
Time Interval: 130 Second --> 130 Second No Conversion Required
Length of Harbor: 180 Meter --> 180 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

α_D = (V_D-V_f)*T_D/(2*L) --> (25-7)*130/(2*180)

Evaluating ... ...

α_D = 6.5

STEP 3: Convert Result to Output's Unit

6.5 --> No Conversion Required

FINAL ANSWER

6.5 <-- Density Influence

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Density Currents in Harbors » Density Influence » Density Influence

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Density Influence Calculators

Filling Current Velocity given Density Influence

LaTeX Go Filling Current Velocity = -((2*Length of Harbor*Density Influence/Time Interval)-Density Current Velocity)

Time Interval over which Density Difference exists given Density Influence

LaTeX Go Time Interval = (2*Length of Harbor*Density Influence)/(Density Current Velocity-Filling Current Velocity)

Length of Harbor given Density Influence

LaTeX Go Length of Harbor = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Density Influence)

Density Influence

LaTeX Go Density Influence = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Length of Harbor)

Density Influence Formula

LaTeX Go

Density Influence = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Length of Harbor)
α_D = (V_D-V_f)*T_D/(2*L)

What is Density Current?

A current that is produced by differences in density. Where a flow of sea water has a greater density than that of the water surrounding it, the denser water will dive beneath the less dense water. The density of sea water is affected by temperature, salinity, and the content of suspended sediment.

How to Calculate Density Influence?

Density Influence calculator uses Density Influence = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Length of Harbor) to calculate the Density Influence, The Density Influence formula is defined as factor not independent of the harbour filling but is dependent upon the filling current component as well. Density Influence is denoted by α_D symbol.

How to calculate Density Influence using this online calculator? To use this online calculator for Density Influence, enter Density Current Velocity (V_D), Filling Current Velocity (V_f), Time Interval (T_D) & Length of Harbor (L) and hit the calculate button. Here is how the Density Influence calculation can be explained with given input values -> 6.5 = (25-7)*130/(2*180).

FAQ

What is Density Influence?

The Density Influence formula is defined as factor not independent of the harbour filling but is dependent upon the filling current component as well and is represented as α_D = (V_D-V_f)*T_D/(2*L) or Density Influence = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Length of Harbor). Density Current Velocity dependent upon the filling current component, Filling Current Velocity dependent upon the filling current component are horizontal movements which range in magnitude, Time Interval over which the Density Difference exists & Length of Harbor dependent upon the filling current component.

How to calculate Density Influence?

The Density Influence formula is defined as factor not independent of the harbour filling but is dependent upon the filling current component as well is calculated using Density Influence = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Length of Harbor). To calculate Density Influence, you need Density Current Velocity (V_D), Filling Current Velocity (V_f), Time Interval (T_D) & Length of Harbor (L). With our tool, you need to enter the respective value for Density Current Velocity, Filling Current Velocity, Time Interval & Length of Harbor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search