Density of Water given Volume of Digested Sludge Calculator

✖The Weight of Sludge refers to the semi-solid residue left behind from various industrial, municipal, or wastewater treatment processes.ⓘ Weight of Sludge [W_s]			+10% -10%
✖The Sludge Volume refers to the amount of residual solid material left behind after wastewater treatment processes.ⓘ Sludge Volume [V_s]			+10% -10%
✖The Specific Gravity of Sludge refers to the ratio of the density of the sludge to the density of water at a specified temperature.ⓘ Specific Gravity of Sludge [G_s]			+10% -10%
✖The Percent Solids refers to the proportion of solid particles present in a mixture, typically in water or wastewater.ⓘ Percent Solids [%s]			+10% -10%

✖The Water Density refers to the mass of water per unit volume. It is a critical parameter because it affects various aspects of water-related processes and systems.ⓘ Density of Water given Volume of Digested Sludge [ρ_water]

⎘ Copy

👎

Formula

✖

Density of Water given Volume of Digested Sludge

Formula

ρ water = \frac{W s}{V s \cdot G s \cdot %s}

Example

1000 kg/m³ = \frac{20 kg}{10.0 m³ \cdot 0.01 \cdot 0.20}

Calculator

LaTeX

Reset

👍

Download Design of an Aerobic Digester Formulas PDF PDF Image

Density of Water given Volume of Digested Sludge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Water Density = (Weight of Sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids)
ρ_water = (W_s)/(V_s*G_s*%s)
This formula uses 5 Variables

Variables Used

Water Density - (Measured in Kilogram per Cubic Meter) - The Water Density refers to the mass of water per unit volume. It is a critical parameter because it affects various aspects of water-related processes and systems.
Weight of Sludge - (Measured in Kilogram) - The Weight of Sludge refers to the semi-solid residue left behind from various industrial, municipal, or wastewater treatment processes.
Sludge Volume - (Measured in Cubic Meter) - The Sludge Volume refers to the amount of residual solid material left behind after wastewater treatment processes.
Specific Gravity of Sludge - The Specific Gravity of Sludge refers to the ratio of the density of the sludge to the density of water at a specified temperature.
Percent Solids - The Percent Solids refers to the proportion of solid particles present in a mixture, typically in water or wastewater.

STEP 1: Convert Input(s) to Base Unit

Weight of Sludge: 20 Kilogram --> 20 Kilogram No Conversion Required
Sludge Volume: 10 Cubic Meter --> 10 Cubic Meter No Conversion Required
Specific Gravity of Sludge: 0.01 --> No Conversion Required
Percent Solids: 0.2 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_water = (W_s)/(V_s*G_s*%s) --> (20)/(10*0.01*0.2)

Evaluating ... ...

ρ_water = 1000

STEP 3: Convert Result to Output's Unit

1000 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

1000 Kilogram per Cubic Meter <-- Water Density

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of an Aerobic Digester » Density of Water given Volume of Digested Sludge

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Design of an Aerobic Digester Calculators

Specific Gravity of Digested Sludge given Volume of Digested Sludge

Go Specific Gravity of Sludge = (Weight of Sludge)/(Water Density*Sludge Volume*Percent Solids)

Density of Water given Volume of Digested Sludge

Go Water Density = (Weight of Sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids)

Volume of Digested Sludge

Go Sludge Volume = (Weight of Sludge)/(Water Density*Specific Gravity of Sludge*Percent Solids)

Weight of Sludge given Volume of Digested Sludge

Go Weight of Sludge = (Water Density*Sludge Volume*Specific Gravity of Sludge*Percent Solids)

Density of Water given Volume of Digested Sludge Formula

Water Density = (Weight of Sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids)
ρ_water = (W_s)/(V_s*G_s*%s)

What is Density of Water?

A common unit of measurement for water's density is gram per milliliter (1 g/ml) or 1 gram per cubic centimeter. Actually, the exact density of water is not really 1 g/ml, but rather a bit less (very, very little less), at 0.9998395 g/ml at 4.0° Celsius (39.2° Fahrenheit).

How to Calculate Density of Water given Volume of Digested Sludge?

Density of Water given Volume of Digested Sludge calculator uses Water Density = (Weight of Sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids) to calculate the Water Density, The Density of Water given Volume of Digested Sludge formula is defined as the mass of water per unit volume. It is a critical parameter because it affects various aspects of water-related processes and systems, calculated using the values of sludge weight, volume and percent solids. Water Density is denoted by ρ_water symbol.

How to calculate Density of Water given Volume of Digested Sludge using this online calculator? To use this online calculator for Density of Water given Volume of Digested Sludge, enter Weight of Sludge (W_s), Sludge Volume (V_s), Specific Gravity of Sludge (G_s) & Percent Solids (%s) and hit the calculate button. Here is how the Density of Water given Volume of Digested Sludge calculation can be explained with given input values -> 4.975124 = (20)/(10*0.01*0.2).

FAQ

What is Density of Water given Volume of Digested Sludge?

The Density of Water given Volume of Digested Sludge formula is defined as the mass of water per unit volume. It is a critical parameter because it affects various aspects of water-related processes and systems, calculated using the values of sludge weight, volume and percent solids and is represented as ρ_water = (W_s)/(V_s*G_s*%s) or Water Density = (Weight of Sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids). The Weight of Sludge refers to the semi-solid residue left behind from various industrial, municipal, or wastewater treatment processes, The Sludge Volume refers to the amount of residual solid material left behind after wastewater treatment processes, The Specific Gravity of Sludge refers to the ratio of the density of the sludge to the density of water at a specified temperature & The Percent Solids refers to the proportion of solid particles present in a mixture, typically in water or wastewater.

How to calculate Density of Water given Volume of Digested Sludge?

The Density of Water given Volume of Digested Sludge formula is defined as the mass of water per unit volume. It is a critical parameter because it affects various aspects of water-related processes and systems, calculated using the values of sludge weight, volume and percent solids is calculated using Water Density = (Weight of Sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids). To calculate Density of Water given Volume of Digested Sludge, you need Weight of Sludge (W_s), Sludge Volume (V_s), Specific Gravity of Sludge (G_s) & Percent Solids (%s). With our tool, you need to enter the respective value for Weight of Sludge, Sludge Volume, Specific Gravity of Sludge & Percent Solids and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search