Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp Solution

STEP 0: Pre-Calculation Summary
Formula Used
Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure)
ρvC = ((α^2)*T)/((KT-KS)*Cp)
This formula uses 6 Variables
Variables Used
Density given VC - (Measured in Kilogram per Cubic Meter) - Density given VC of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.
Volumetric Coefficient of Thermal Expansion - (Measured in 1 Per Kelvin) - Volumetric coefficient of thermal expansion is the tendency of matter to change its volume in response to a change in temperature.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.
Isothermal Compressibility - (Measured in Square Meter per Newton) - The isothermal compressibility is the change in volume due to change in pressure at constant temperature.
Isentropic Compressibility - (Measured in Square Meter per Newton) - The Isentropic Compressibility is the change in volume due to change in pressure at constant entropy.
Molar Specific Heat Capacity at Constant Pressure - (Measured in Joule Per Kelvin Per Mole) - Molar Specific Heat Capacity at Constant Pressure of a gas is the amount of heat required to raise the temperature of 1 mol of the gas by 1 °C at the constant pressure.
STEP 1: Convert Input(s) to Base Unit
Volumetric Coefficient of Thermal Expansion: 25 1 Per Kelvin --> 25 1 Per Kelvin No Conversion Required
Temperature: 85 Kelvin --> 85 Kelvin No Conversion Required
Isothermal Compressibility: 75 Square Meter per Newton --> 75 Square Meter per Newton No Conversion Required
Isentropic Compressibility: 70 Square Meter per Newton --> 70 Square Meter per Newton No Conversion Required
Molar Specific Heat Capacity at Constant Pressure: 122 Joule Per Kelvin Per Mole --> 122 Joule Per Kelvin Per Mole No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ρvC = ((α^2)*T)/((KT-KS)*Cp) --> ((25^2)*85)/((75-70)*122)
Evaluating ... ...
ρvC = 87.0901639344262
STEP 3: Convert Result to Output's Unit
87.0901639344262 Kilogram per Cubic Meter --> No Conversion Required
FINAL ANSWER
87.0901639344262 87.09016 Kilogram per Cubic Meter <-- Density given VC
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has created this Calculator and 800+ more calculators!
Verifier Image
Verified by Prashant Singh
K J Somaiya College of science (K J Somaiya), Mumbai
Prashant Singh has verified this Calculator and 500+ more calculators!

Density of Gas Calculators

Density of Gas given Average Velocity and Pressure in 2D
​ LaTeX ​ Go Density of Gas given AV and P = (pi*Pressure of Gas)/(2*((Average Velocity of Gas)^2))
Density of Gas given Average Velocity and Pressure
​ LaTeX ​ Go Density of Gas given AV and P = (8*Pressure of Gas)/(pi*((Average Velocity of Gas)^2))
Density of Gas given Root Mean Square Speed and Pressure
​ LaTeX ​ Go Density of Gas given RMS and P = (3*Pressure of Gas)/((Root Mean Square Speed)^2)
Density of Gas given Most Probable Speed Pressure
​ LaTeX ​ Go Density of Gas given MPS = (2*Pressure of Gas)/((Most Probable Velocity)^2)

Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp Formula

​LaTeX ​Go
Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure)
ρvC = ((α^2)*T)/((KT-KS)*Cp)

What are the postulates of kinetic theory of gases?

1) Actual volume of gas molecules is negligible in comparison to the total volume of the gas. 2) no force of attraction between the gas molecules. 3) Particles of gas are in constant random motion. 4) Particles of gas collide with each other and with the walls of the container. 5)Collisions are perfectly elastic. 6) Different particles of the gas, have different speeds. 7) The average kinetic energy of the gas molecule is directly proportional to the absolute temperature.

How to Calculate Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp?

Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp calculator uses Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure) to calculate the Density given VC, The Density given volumetric coefficient of thermal expansion, compressibility factors and Cp is defined as material mass per unit volume and designated by the symbol ρ (rho). Density given VC is denoted by ρvC symbol.

How to calculate Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp using this online calculator? To use this online calculator for Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp, enter Volumetric Coefficient of Thermal Expansion (α), Temperature (T), Isothermal Compressibility (KT), Isentropic Compressibility (KS) & Molar Specific Heat Capacity at Constant Pressure (Cp) and hit the calculate button. Here is how the Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp calculation can be explained with given input values -> 87.09016 = ((25^2)*85)/((75-70)*122).

FAQ

What is Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp?
The Density given volumetric coefficient of thermal expansion, compressibility factors and Cp is defined as material mass per unit volume and designated by the symbol ρ (rho) and is represented as ρvC = ((α^2)*T)/((KT-KS)*Cp) or Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure). Volumetric coefficient of thermal expansion is the tendency of matter to change its volume in response to a change in temperature, Temperature is the degree or intensity of heat present in a substance or object, The isothermal compressibility is the change in volume due to change in pressure at constant temperature, The Isentropic Compressibility is the change in volume due to change in pressure at constant entropy & Molar Specific Heat Capacity at Constant Pressure of a gas is the amount of heat required to raise the temperature of 1 mol of the gas by 1 °C at the constant pressure.
How to calculate Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp?
The Density given volumetric coefficient of thermal expansion, compressibility factors and Cp is defined as material mass per unit volume and designated by the symbol ρ (rho) is calculated using Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure). To calculate Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp, you need Volumetric Coefficient of Thermal Expansion (α), Temperature (T), Isothermal Compressibility (KT), Isentropic Compressibility (KS) & Molar Specific Heat Capacity at Constant Pressure (Cp). With our tool, you need to enter the respective value for Volumetric Coefficient of Thermal Expansion, Temperature, Isothermal Compressibility, Isentropic Compressibility & Molar Specific Heat Capacity at Constant Pressure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Density given VC?
In this formula, Density given VC uses Volumetric Coefficient of Thermal Expansion, Temperature, Isothermal Compressibility, Isentropic Compressibility & Molar Specific Heat Capacity at Constant Pressure. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*(Molar Specific Heat Capacity at Constant Volume+[R]))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!