Deflection at Section given Moment at Section if Both Ends of Column are Hinged Solution

STEP 0: Pre-Calculation Summary
Formula Used
Deflection at Section = -Moment of Section/Column Crippling Load
δ = -Mt/P
This formula uses 3 Variables
Variables Used
Deflection at Section - (Measured in Meter) - Deflection at Section is the lateral displacement at the section of the column.
Moment of Section - (Measured in Newton Meter) - The Moment of Section is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.
Column Crippling Load - (Measured in Newton) - Column Crippling Load is the load over which a column prefers to deform laterally rather than compressing itself.
STEP 1: Convert Input(s) to Base Unit
Moment of Section: 50 Newton Millimeter --> 0.05 Newton Meter (Check conversion ​here)
Column Crippling Load: 3 Kilonewton --> 3000 Newton (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
δ = -Mt/P --> -0.05/3000
Evaluating ... ...
δ = -1.66666666666667E-05
STEP 3: Convert Result to Output's Unit
-1.66666666666667E-05 Meter -->-0.0166666666666667 Millimeter (Check conversion ​here)
FINAL ANSWER
-0.0166666666666667 -0.016667 Millimeter <-- Deflection at Section
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Both Ends of Columns are Hinged Calculators

Crippling Load when Both Ends of Column are Hinged
​ LaTeX ​ Go Column Crippling Load = (pi^2*Modulus of Elasticity of Column*Moment of Inertia Column)/Column Length^2
Deflection at Section given Moment at Section if Both Ends of Column are Hinged
​ LaTeX ​ Go Deflection at Section = -Moment of Section/Column Crippling Load
Moment due to Crippling Load at Section if Both Ends of Column are Hinged
​ LaTeX ​ Go Moment of Section = -Column Crippling Load*Deflection at Section
Crippling Load given Moment at Section if Both Ends of Column are Hinged
​ LaTeX ​ Go Column Crippling Load = -Moment of Section/Deflection at Section

Deflection at Section given Moment at Section if Both Ends of Column are Hinged Formula

​LaTeX ​Go
Deflection at Section = -Moment of Section/Column Crippling Load
δ = -Mt/P

What is buckling or crippling load?

In structural engineering, buckling is the sudden change in shape (deformation) of a structural component under loads, such as the bowing of a column under compression or the wrinkling of a plate under shear.

How to Calculate Deflection at Section given Moment at Section if Both Ends of Column are Hinged?

Deflection at Section given Moment at Section if Both Ends of Column are Hinged calculator uses Deflection at Section = -Moment of Section/Column Crippling Load to calculate the Deflection at Section, Deflection at Section given Moment at Section if Both Ends of Column are Hinged formula is defined as a measure of the lateral displacement of a column at a specific section when both ends are hinged, providing insight into the column's behavior under load. Deflection at Section is denoted by δ symbol.

How to calculate Deflection at Section given Moment at Section if Both Ends of Column are Hinged using this online calculator? To use this online calculator for Deflection at Section given Moment at Section if Both Ends of Column are Hinged, enter Moment of Section (Mt) & Column Crippling Load (P) and hit the calculate button. Here is how the Deflection at Section given Moment at Section if Both Ends of Column are Hinged calculation can be explained with given input values -> -16.666667 = -0.05/3000.

FAQ

What is Deflection at Section given Moment at Section if Both Ends of Column are Hinged?
Deflection at Section given Moment at Section if Both Ends of Column are Hinged formula is defined as a measure of the lateral displacement of a column at a specific section when both ends are hinged, providing insight into the column's behavior under load and is represented as δ = -Mt/P or Deflection at Section = -Moment of Section/Column Crippling Load. The Moment of Section is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member & Column Crippling Load is the load over which a column prefers to deform laterally rather than compressing itself.
How to calculate Deflection at Section given Moment at Section if Both Ends of Column are Hinged?
Deflection at Section given Moment at Section if Both Ends of Column are Hinged formula is defined as a measure of the lateral displacement of a column at a specific section when both ends are hinged, providing insight into the column's behavior under load is calculated using Deflection at Section = -Moment of Section/Column Crippling Load. To calculate Deflection at Section given Moment at Section if Both Ends of Column are Hinged, you need Moment of Section (Mt) & Column Crippling Load (P). With our tool, you need to enter the respective value for Moment of Section & Column Crippling Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!