Depth of Water in Well given Coefficient of Transmissibility with Base 10 Calculator

✖Aquifer Thickness (at Midpoint between Equipotential lines) or otherwise is the thickness of aquifer in which the pore spaces of rock forming the aquifer may or may not be with water.ⓘ Aquifer Thickness [b_w]			+10% -10%
✖Discharge is the flow rate of water that is extracted from or injected into a well.ⓘ Discharge [Q]			+10% -10%
✖Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table.ⓘ Radius of Influence [R_w]			+10% -10%
✖Radius of Well is defined as the distance from center of well to its outer boundary.ⓘ Radius of Well [r]			+10% -10%
✖Coefficient of Transmissibility is defined as the rate of flow of water in gallons per day through a vertical strip of the aquifer.ⓘ Coefficient of Transmissibility [T_envi]			+10% -10%

✖Depth of Water in Well is measured above the impermeable layer.ⓘ Depth of Water in Well given Coefficient of Transmissibility with Base 10 [h_well]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Confined Aquifer Formulas PDF PDF Image

Depth of Water in Well given Coefficient of Transmissibility with Base 10 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),10))/(2.72*Coefficient of Transmissibility))
h_well = b_w-((Q*log((R_w/r),10))/(2.72*T_envi))
This formula uses 1 Functions, 6 Variables

Functions Used

log - Logarithmic function is an inverse function to exponentiation., log(Base, Number)

Variables Used

Depth of Water in Well - (Measured in Meter) - Depth of Water in Well is measured above the impermeable layer.
Aquifer Thickness - (Measured in Meter) - Aquifer Thickness (at Midpoint between Equipotential lines) or otherwise is the thickness of aquifer in which the pore spaces of rock forming the aquifer may or may not be with water.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the flow rate of water that is extracted from or injected into a well.
Radius of Influence - (Measured in Meter) - Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table.
Radius of Well - (Measured in Meter) - Radius of Well is defined as the distance from center of well to its outer boundary.
Coefficient of Transmissibility - (Measured in Square Meter per Second) - Coefficient of Transmissibility is defined as the rate of flow of water in gallons per day through a vertical strip of the aquifer.

STEP 1: Convert Input(s) to Base Unit

Aquifer Thickness: 14.15 Meter --> 14.15 Meter No Conversion Required
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Radius of Influence: 8.6 Meter --> 8.6 Meter No Conversion Required
Radius of Well: 7.5 Meter --> 7.5 Meter No Conversion Required
Coefficient of Transmissibility: 1.5 Square Meter per Second --> 1.5 Square Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_well = b_w-((Q*log((R_w/r),10))/(2.72*T_envi)) --> 14.15-((1.01*log((8.6/7.5),10))/(2.72*1.5))

Evaluating ... ...

h_well = 9.98511554710837

STEP 3: Convert Result to Output's Unit

9.98511554710837 Meter --> No Conversion Required

FINAL ANSWER

9.98511554710837 ≈ 9.985116 Meter <-- Depth of Water in Well

(Calculation completed in 00.008 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Well Hydraulics » Confined Aquifer » Depth of Water in Well » Depth of Water in Well given Coefficient of Transmissibility with Base 10

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Depth of Water in Well Calculators

Depth of Water in Well given Discharge in Confined Aquifer

LaTeX Go Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),e))/(2*pi*Coefficient of Permeability in Well Hydraulics*Aquifer Thickness During Pumping))

Depth of Water in Well given Coefficient of Transmissibility

LaTeX Go Depth of Water = Initial Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),e))/(2*pi*Coefficient of Transmissibility))

Depth of Water in Well given Discharge in Confined Aquifer with Base 10

LaTeX Go Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),10))/(2.72*Coefficient of Permeability*Aquifer Thickness During Pumping))

Depth of Water in Well given Coefficient of Transmissibility with Base 10

LaTeX Go Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),10))/(2.72*Coefficient of Transmissibility))

Depth of Water in Well given Coefficient of Transmissibility with Base 10 Formula

LaTeX Go

Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),10))/(2.72*Coefficient of Transmissibility))
h_well = b_w-((Q*log((R_w/r),10))/(2.72*T_envi))

What is Coefficient of Transmissibility?

The coefficient of transmissibility. is defined as the rate of flow of water. in gallons per day through a vertical. strip of the aquifer 1 ft wide and ex- tending the full saturated thickness.

How to Calculate Depth of Water in Well given Coefficient of Transmissibility with Base 10?

Depth of Water in Well given Coefficient of Transmissibility with Base 10 calculator uses Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),10))/(2.72*Coefficient of Transmissibility)) to calculate the Depth of Water in Well, The Depth of Water in Well given Coefficient of Transmissibility with Base 10 formula is defined as the value of depth of water in well with base 10, when we have prior information of coefficient of transmissibility. Depth of Water in Well is denoted by h_well symbol.

How to calculate Depth of Water in Well given Coefficient of Transmissibility with Base 10 using this online calculator? To use this online calculator for Depth of Water in Well given Coefficient of Transmissibility with Base 10, enter Aquifer Thickness (b_w), Discharge (Q), Radius of Influence (R_w), Radius of Well (r) & Coefficient of Transmissibility (T_envi) and hit the calculate button. Here is how the Depth of Water in Well given Coefficient of Transmissibility with Base 10 calculation can be explained with given input values -> 10.83512 = 14.15-((1.01*log((8.6/7.5),10))/(2.72*1.5)).

FAQ

What is Depth of Water in Well given Coefficient of Transmissibility with Base 10?

The Depth of Water in Well given Coefficient of Transmissibility with Base 10 formula is defined as the value of depth of water in well with base 10, when we have prior information of coefficient of transmissibility and is represented as h_well = b_w-((Q*log((R_w/r),10))/(2.72*T_envi)) or Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),10))/(2.72*Coefficient of Transmissibility)). Aquifer Thickness (at Midpoint between Equipotential lines) or otherwise is the thickness of aquifer in which the pore spaces of rock forming the aquifer may or may not be with water, Discharge is the flow rate of water that is extracted from or injected into a well, Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table, Radius of Well is defined as the distance from center of well to its outer boundary & Coefficient of Transmissibility is defined as the rate of flow of water in gallons per day through a vertical strip of the aquifer.

How to calculate Depth of Water in Well given Coefficient of Transmissibility with Base 10?

The Depth of Water in Well given Coefficient of Transmissibility with Base 10 formula is defined as the value of depth of water in well with base 10, when we have prior information of coefficient of transmissibility is calculated using Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),10))/(2.72*Coefficient of Transmissibility)). To calculate Depth of Water in Well given Coefficient of Transmissibility with Base 10, you need Aquifer Thickness (b_w), Discharge (Q), Radius of Influence (R_w), Radius of Well (r) & Coefficient of Transmissibility (T_envi). With our tool, you need to enter the respective value for Aquifer Thickness, Discharge, Radius of Influence, Radius of Well & Coefficient of Transmissibility and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Depth of Water in Well?

In this formula, Depth of Water in Well uses Aquifer Thickness, Discharge, Radius of Influence, Radius of Well & Coefficient of Transmissibility. We can use 2 other way(s) to calculate the same, which is/are as follows -

Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),e))/(2*pi*Coefficient of Permeability in Well Hydraulics*Aquifer Thickness During Pumping))
Depth of Water in Well = Aquifer Thickness-((Discharge*log((Radius of Influence/Radius of Well),10))/(2.72*Coefficient of Permeability*Aquifer Thickness During Pumping))

Home

FREE PDFs

🔍 Search