Depth of Column using Bending Stress and Eccentric Load Calculator

✖Eccentric Load on Column is the load that causes direct stress as well as bending stress.ⓘ Eccentric Load on Column [P]			+10% -10%
✖Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.ⓘ Eccentricity of Loading [e_load]			+10% -10%
✖Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend.ⓘ Bending Stress in Column [σ_b]			+10% -10%
✖Width of Column is describe that how wide the column is.ⓘ Width of Column [b]			+10% -10%

✖Depth of Column is the distance from the top or surface to the bottom of something.ⓘ Depth of Column using Bending Stress and Eccentric Load [h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Depth of Column using Bending Stress and Eccentric Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Bending Stress in Column*(Width of Column^2))
h = (6*P*e_load)/(σ_b*(b^2))
This formula uses 5 Variables

Variables Used

Depth of Column - (Measured in Meter) - Depth of Column is the distance from the top or surface to the bottom of something.
Eccentric Load on Column - (Measured in Newton) - Eccentric Load on Column is the load that causes direct stress as well as bending stress.
Eccentricity of Loading - (Measured in Meter) - Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.
Bending Stress in Column - (Measured in Pascal) - Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend.
Width of Column - (Measured in Meter) - Width of Column is describe that how wide the column is.

STEP 1: Convert Input(s) to Base Unit

Eccentric Load on Column: 7 Kilonewton --> 7000 Newton (Check conversion here)
Eccentricity of Loading: 25 Millimeter --> 0.025 Meter (Check conversion here)
Bending Stress in Column: 0.04 Megapascal --> 40000 Pascal (Check conversion here)
Width of Column: 600 Millimeter --> 0.6 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h = (6*P*e_load)/(σ_b*(b^2)) --> (6*7000*0.025)/(40000*(0.6^2))

Evaluating ... ...

h = 0.0729166666666667

STEP 3: Convert Result to Output's Unit

0.0729166666666667 Meter -->72.9166666666667 Millimeter (Check conversion here)

FINAL ANSWER

72.9166666666667 ≈ 72.91667 Millimeter <-- Depth of Column

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Direct And Bending Stress » Resultant Stress » Mechanical » Rectangular Section Is Subjected to Eccentric Load » Depth of Column using Bending Stress and Eccentric Load

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Rectangular Section Is Subjected to Eccentric Load Calculators

Minimum Stress using Eccentric Load and Eccentricity

LaTeX Go Minimum Stress Value = (Eccentric Load on Column*(1-(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area)

Eccentric Load using Minimum Stress

LaTeX Go Eccentric Load on Column = (Minimum Stress Value*Column Cross Sectional Area)/(1-(6*Eccentricity of Loading/Width of Column))

Eccentricity using Minimum Stress

LaTeX Go Eccentricity of Loading = (1-(Minimum Stress Value*Column Cross Sectional Area/Eccentric Load on Column))*(Width of Column/6)

Minimum Stress

LaTeX Go Minimum Stress Value = (Direct Stress-Bending Stress in Column)

Depth of Column using Bending Stress and Eccentric Load Formula

LaTeX Go

Depth of Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Bending Stress in Column*(Width of Column^2))
h = (6*P*e_load)/(σ_b*(b^2))

What type of Stress is Developed due to Bending?

In torsion of a circular shaft, the action was all shear; contiguous cross sections sheared over one another in their rotation about the axis of the shaft. Here, the major stresses induced due to bending are normal stresses of tension and compression.

How to Calculate Depth of Column using Bending Stress and Eccentric Load?

Depth of Column using Bending Stress and Eccentric Load calculator uses Depth of Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Bending Stress in Column*(Width of Column^2)) to calculate the Depth of Column, The Depth of Column using Bending Stress and Eccentric Load formula is defined as a measure of the maximum height of a column that can withstand a given bending stress and eccentric load without failing, providing a critical design parameter for structural engineers. Depth of Column is denoted by h symbol.

How to calculate Depth of Column using Bending Stress and Eccentric Load using this online calculator? To use this online calculator for Depth of Column using Bending Stress and Eccentric Load, enter Eccentric Load on Column (P), Eccentricity of Loading (e_load), Bending Stress in Column (σ_b) & Width of Column (b) and hit the calculate button. Here is how the Depth of Column using Bending Stress and Eccentric Load calculation can be explained with given input values -> 72916.67 = (6*7000*0.025)/(40000*(0.6^2)).

FAQ

What is Depth of Column using Bending Stress and Eccentric Load?

The Depth of Column using Bending Stress and Eccentric Load formula is defined as a measure of the maximum height of a column that can withstand a given bending stress and eccentric load without failing, providing a critical design parameter for structural engineers and is represented as h = (6*P*e_load)/(σ_b*(b^2)) or Depth of Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Bending Stress in Column*(Width of Column^2)). Eccentric Load on Column is the load that causes direct stress as well as bending stress, Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen, Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend & Width of Column is describe that how wide the column is.

How to calculate Depth of Column using Bending Stress and Eccentric Load?

The Depth of Column using Bending Stress and Eccentric Load formula is defined as a measure of the maximum height of a column that can withstand a given bending stress and eccentric load without failing, providing a critical design parameter for structural engineers is calculated using Depth of Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Bending Stress in Column*(Width of Column^2)). To calculate Depth of Column using Bending Stress and Eccentric Load, you need Eccentric Load on Column (P), Eccentricity of Loading (e_load), Bending Stress in Column (σ_b) & Width of Column (b). With our tool, you need to enter the respective value for Eccentric Load on Column, Eccentricity of Loading, Bending Stress in Column & Width of Column and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Depth of Column?

In this formula, Depth of Column uses Eccentric Load on Column, Eccentricity of Loading, Bending Stress in Column & Width of Column. We can use 1 other way(s) to calculate the same, which is/are as follows -

Depth of Column = (6*Moment due to Eccentric Load)/(Bending Stress in Column*(Width of Column^2))

Home

FREE PDFs

🔍 Search