Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids Calculator

✖Space Time for 1st Order Catalyzed Reactions is a parameter used to quantify the time required for a given volume of reactant to pass through a catalytic reactor.ⓘ Space Time for 1st Order Catalyzed Reactions [𝛕 ']			+10% -10%
✖The Rate Constant based on Weight of Catalyst is a specific form of expressing the rate constant in a catalytic reaction with respect to the mass of the catalyst.ⓘ Rate Constant based on Weight of Catalyst [k']			+10% -10%
✖Initial Conc. for 1st Order Catalyzed Reactions is the first measured Concentration of a Compound in a Substance.ⓘ Initial Conc. for 1st Order Catalyzed Reactions [C_A0]			+10% -10%
✖Reactant concentration is a measure of the quantity of a specific reactant in relation to the total volume or mass of the system in which a chemical reaction is taking place.ⓘ Reactant Concentration [C_A]			+10% -10%
✖A Time Interval is the amount of time required for the change from initial to the final state.ⓘ Time Interval [t]			+10% -10%

✖Rate of Deactivation for Plug Flow refers to the change in activity or effectiveness of a catalyst over time in a plug flow reactor configuration.ⓘ Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids [k_d,PF]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Reaction Engineering Formula PDF PDF Image

Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rate of Deactivation for Plug Flow = (ln(Space Time for 1st Order Catalyzed Reactions)-ln((1/Rate Constant based on Weight of Catalyst)*ln(Initial Conc. for 1st Order Catalyzed Reactions/Reactant Concentration)))/Time Interval
k_d,PF = (ln(𝛕 ')-ln((1/k')*ln(C_A0/C_A)))/t
This formula uses 1 Functions, 6 Variables

Functions Used

ln - The natural logarithm, also known as the logarithm to the base e, is the inverse function of the natural exponential function., ln(Number)

Variables Used

Rate of Deactivation for Plug Flow - (Measured in 1 Per Second) - Rate of Deactivation for Plug Flow refers to the change in activity or effectiveness of a catalyst over time in a plug flow reactor configuration.
Space Time for 1st Order Catalyzed Reactions - (Measured in Second) - Space Time for 1st Order Catalyzed Reactions is a parameter used to quantify the time required for a given volume of reactant to pass through a catalytic reactor.
Rate Constant based on Weight of Catalyst - (Measured in 1 Per Second) - The Rate Constant based on Weight of Catalyst is a specific form of expressing the rate constant in a catalytic reaction with respect to the mass of the catalyst.
Initial Conc. for 1st Order Catalyzed Reactions - (Measured in Mole per Cubic Meter) - Initial Conc. for 1st Order Catalyzed Reactions is the first measured Concentration of a Compound in a Substance.
Reactant Concentration - (Measured in Mole per Cubic Meter) - Reactant concentration is a measure of the quantity of a specific reactant in relation to the total volume or mass of the system in which a chemical reaction is taking place.
Time Interval - (Measured in Second) - A Time Interval is the amount of time required for the change from initial to the final state.

STEP 1: Convert Input(s) to Base Unit

Space Time for 1st Order Catalyzed Reactions: 2.72 Second --> 2.72 Second No Conversion Required
Rate Constant based on Weight of Catalyst: 0.988 1 Per Second --> 0.988 1 Per Second No Conversion Required
Initial Conc. for 1st Order Catalyzed Reactions: 80 Mole per Cubic Meter --> 80 Mole per Cubic Meter No Conversion Required
Reactant Concentration: 24.1 Mole per Cubic Meter --> 24.1 Mole per Cubic Meter No Conversion Required
Time Interval: 3 Second --> 3 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

k_d,PF = (ln(𝛕 ')-ln((1/k')*ln(C_A0/C_A)))/t --> (ln(2.72)-ln((1/0.988)*ln(80/24.1)))/3

Evaluating ... ...

k_d,PF = 0.268797364125551

STEP 3: Convert Result to Output's Unit

0.268797364125551 1 Per Second --> No Conversion Required

FINAL ANSWER

0.268797364125551 ≈ 0.268797 1 Per Second <-- Rate of Deactivation for Plug Flow

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Chemical Reaction Engineering » Reactions Catalyzed by Solids » Deactivating Catalysts » Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids

Credits

Created by Pavan Kumar

Anurag Group of Institutions (AGI), Hyderabad

Pavan Kumar has created this Calculator and 100+ more calculators!

Verified by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has verified this Calculator and 200+ more calculators!

< Deactivating Catalysts Calculators

Weight of Catalyst in Batch Solids and Batch Fluids

LaTeX Go Weight of Catalyst in Deactivation of Catalyst = ((Volume of Reactor*Rate of Deactivation)/Rate Constant based on Weight of Catalyst)*exp(ln(ln(Reactant Concentration/Concentration at Infinite Time))+Rate of Deactivation*Time Interval)

Deactivation rate for Batch Solids and Mixed Changing Flow of Fluids

LaTeX Go Rate of Deactivation for Mixed Flow = (ln(Space Time for 1st Order Catalyzed Reactions)-ln((Initial Conc. for 1st Order Catalyzed Reactions-Reactant Concentration)/(Rate Constant based on Weight of Catalyst*Reactant Concentration)))/Time Interval

Deactivation Rate in Batch Solids and Mixed Constant Flow of Fluids

LaTeX Go Rate of Deactivation for Mixed Flow = (ln(Rate Constant based on Weight of Catalyst*Space Time for 1st Order Catalyzed Reactions)-ln((Initial Conc. for 1st Order Catalyzed Reactions/Reactant Concentration)-1))/Time Interval

Activity of Catalyst

LaTeX Go Activity of Catalyst = -(Rate at which Pellet converts Reactant A)/-(Rate of Reaction of A with a Fresh Pellet)

Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids Formula

LaTeX Go

What are Batch Solids and Plug Flow of Fluids?

Batch solids refer to solid materials that are processed in a batch mode, meaning that a specific quantity of material is treated or transformed at once in a defined batch or lot. In a plug flow, the fluid moves in a well-defined, continuous "plug" without significant mixing or radial variation in velocity. This is in contrast to other flow patterns such as laminar flow and turbulent flow.

What is Deactivation of Catalyst?

Catalyst deactivation refers to a gradual loss of catalytic activity over time, leading to a decline in the catalyst's effectiveness in promoting a chemical reaction. This phenomenon can occur due to various factors, and understanding the mechanisms of catalyst deactivation is crucial for optimizing and extending the lifespan of catalysts in industrial processes.

How to Calculate Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids?

Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids calculator uses Rate of Deactivation for Plug Flow = (ln(Space Time for 1st Order Catalyzed Reactions)-ln((1/Rate Constant based on Weight of Catalyst)*ln(Initial Conc. for 1st Order Catalyzed Reactions/Reactant Concentration)))/Time Interval to calculate the Rate of Deactivation for Plug Flow, The Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids formula is defined as Rate of Deactivation Calculated when the Batch Solids and Plug Flow of Fluids are Considered in the Reactors, at Deactivation of Catalyst. Rate of Deactivation for Plug Flow is denoted by k_d,PF symbol.

How to calculate Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids using this online calculator? To use this online calculator for Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids, enter Space Time for 1st Order Catalyzed Reactions (𝛕 '), Rate Constant based on Weight of Catalyst (k'), Initial Conc. for 1st Order Catalyzed Reactions (C_A0), Reactant Concentration (C_A) & Time Interval (t) and hit the calculate button. Here is how the Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids calculation can be explained with given input values -> 0.268797 = (ln(2.72)-ln((1/0.988)*ln(80/24.1)))/3.

FAQ

What is Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids?

The Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids formula is defined as Rate of Deactivation Calculated when the Batch Solids and Plug Flow of Fluids are Considered in the Reactors, at Deactivation of Catalyst and is represented as k_d,PF = (ln(𝛕 ')-ln((1/k')*ln(C_A0/C_A)))/t or Rate of Deactivation for Plug Flow = (ln(Space Time for 1st Order Catalyzed Reactions)-ln((1/Rate Constant based on Weight of Catalyst)*ln(Initial Conc. for 1st Order Catalyzed Reactions/Reactant Concentration)))/Time Interval. Space Time for 1st Order Catalyzed Reactions is a parameter used to quantify the time required for a given volume of reactant to pass through a catalytic reactor, The Rate Constant based on Weight of Catalyst is a specific form of expressing the rate constant in a catalytic reaction with respect to the mass of the catalyst, Initial Conc. for 1st Order Catalyzed Reactions is the first measured Concentration of a Compound in a Substance, Reactant concentration is a measure of the quantity of a specific reactant in relation to the total volume or mass of the system in which a chemical reaction is taking place & A Time Interval is the amount of time required for the change from initial to the final state.

How to calculate Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids?

The Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids formula is defined as Rate of Deactivation Calculated when the Batch Solids and Plug Flow of Fluids are Considered in the Reactors, at Deactivation of Catalyst is calculated using Rate of Deactivation for Plug Flow = (ln(Space Time for 1st Order Catalyzed Reactions)-ln((1/Rate Constant based on Weight of Catalyst)*ln(Initial Conc. for 1st Order Catalyzed Reactions/Reactant Concentration)))/Time Interval. To calculate Deactivation Rate for Batch Solids and Plug Changing Flow of Fluids, you need Space Time for 1st Order Catalyzed Reactions (𝛕 '), Rate Constant based on Weight of Catalyst (k'), Initial Conc. for 1st Order Catalyzed Reactions (C_A0), Reactant Concentration (C_A) & Time Interval (t). With our tool, you need to enter the respective value for Space Time for 1st Order Catalyzed Reactions, Rate Constant based on Weight of Catalyst, Initial Conc. for 1st Order Catalyzed Reactions, Reactant Concentration & Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Rate of Deactivation for Plug Flow?

In this formula, Rate of Deactivation for Plug Flow uses Space Time for 1st Order Catalyzed Reactions, Rate Constant based on Weight of Catalyst, Initial Conc. for 1st Order Catalyzed Reactions, Reactant Concentration & Time Interval. We can use 1 other way(s) to calculate the same, which is/are as follows -

Rate of Deactivation for Plug Flow = (ln(Rate Constant based on Weight of Catalyst*Space Time for 1st Order Catalyzed Reactions)-ln(ln(Initial Conc. for 1st Order Catalyzed Reactions/Reactant Concentration)))/Time Interval

Home

FREE PDFs

🔍 Search