Darcy's Coefficient of Friction given Internal Radius of Pipe Calculator

✖Head Loss is a measure of the reduction in the total head (sum of elevation head, velocity head and pressure head) of the fluid as it moves through a fluid system.ⓘ Head Loss [h_f]			+10% -10%
✖The Pipe Radius is the radius of the pipe through which the fluid is flowing.ⓘ Pipe Radius [R]			+10% -10%
✖Length of Pipe describes the length of the pipe in which the liquid is flowing.ⓘ Length of Pipe [L_p]			+10% -10%
✖Average Velocity in Pipe Fluid Flow is the total volumetric flow rate divided by the cross-sectional area of the pipe.ⓘ Average Velocity in Pipe Fluid Flow [v_avg]			+10% -10%

✖Darcy's Coefficient of Friction refers to a parameter used to characterize the flow of water or other fluids through porous media, such as soil or rock.ⓘ Darcy's Coefficient of Friction given Internal Radius of Pipe [f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Darcy's Weisbach Equation Formulas PDF PDF Image

Darcy's Coefficient of Friction given Internal Radius of Pipe Solution

STEP 0: Pre-Calculation Summary

Formula Used

Darcy's Coefficient of Friction = (Head Loss*[g]*Pipe Radius)/(Length of Pipe*(Average Velocity in Pipe Fluid Flow)^2)
f = (h_f*[g]*R)/(L_p*(v_avg)^2)
This formula uses 1 Constants, 5 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Darcy's Coefficient of Friction - Darcy's Coefficient of Friction refers to a parameter used to characterize the flow of water or other fluids through porous media, such as soil or rock.
Head Loss - (Measured in Meter) - Head Loss is a measure of the reduction in the total head (sum of elevation head, velocity head and pressure head) of the fluid as it moves through a fluid system.
Pipe Radius - (Measured in Meter) - The Pipe Radius is the radius of the pipe through which the fluid is flowing.
Length of Pipe - (Measured in Meter) - Length of Pipe describes the length of the pipe in which the liquid is flowing.
Average Velocity in Pipe Fluid Flow - (Measured in Meter per Second) - Average Velocity in Pipe Fluid Flow is the total volumetric flow rate divided by the cross-sectional area of the pipe.

STEP 1: Convert Input(s) to Base Unit

Head Loss: 1.2 Meter --> 1.2 Meter No Conversion Required
Pipe Radius: 200 Millimeter --> 0.2 Meter (Check conversion here)
Length of Pipe: 2.5 Meter --> 2.5 Meter No Conversion Required
Average Velocity in Pipe Fluid Flow: 4.57 Meter per Second --> 4.57 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f = (h_f*[g]*R)/(L_p*(v_avg)^2) --> (1.2*[g]*0.2)/(2.5*(4.57)^2)

Evaluating ... ...

f = 0.0450774674525614

STEP 3: Convert Result to Output's Unit

0.0450774674525614 --> No Conversion Required

FINAL ANSWER

0.0450774674525614 ≈ 0.045077 <-- Darcy's Coefficient of Friction

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Distribution of Water » Pipe Hydraulics » Darcy's Weisbach Equation » Darcy's Coefficient of Friction given Internal Radius of Pipe

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Darcy's Weisbach Equation Calculators

Average Velocity of Flow given Head Loss

LaTeX Go Average Velocity in Pipe Fluid Flow = sqrt((Head Loss*2*[g]*Diameter of Pipe)/(4*Darcy's Coefficient of Friction*Length of Pipe))

Head Loss due to Friction by Darcy Weisbach Equation

LaTeX Go Head Loss = (4*Darcy's Coefficient of Friction*Length of Pipe*(Average Velocity in Pipe Fluid Flow)^2)/(2*[g]*Diameter of Pipe)

Darcy's Coefficient of Friction given Head Loss

LaTeX Go Darcy's Coefficient of Friction = (Head Loss*2*[g]*Diameter of Pipe)/(4*Length of Pipe*(Average Velocity in Pipe Fluid Flow)^2)

Length of Pipe given Head Loss due to Friction

LaTeX Go Length of Pipe = (Head Loss*2*[g]*Diameter of Pipe)/(4*Darcy's Coefficient of Friction*(Average Velocity in Pipe Fluid Flow)^2)

Darcy's Coefficient of Friction given Internal Radius of Pipe Formula

LaTeX Go

Darcy's Coefficient of Friction = (Head Loss*[g]*Pipe Radius)/(Length of Pipe*(Average Velocity in Pipe Fluid Flow)^2)
f = (h_f*[g]*R)/(L_p*(v_avg)^2)

What is Darcy-Weisbach Friction Factor?

Darcy-Weisbach friction factor is a dimensionless parameter representing the resistance of fluid flow in a pipe, crucial in hydraulic engineering calculations.

How to Calculate Darcy's Coefficient of Friction given Internal Radius of Pipe?

Darcy's Coefficient of Friction given Internal Radius of Pipe calculator uses Darcy's Coefficient of Friction = (Head Loss*[g]*Pipe Radius)/(Length of Pipe*(Average Velocity in Pipe Fluid Flow)^2) to calculate the Darcy's Coefficient of Friction, The Darcy's Coefficient of Friction given Internal Radius of Pipe is defined as the value of darcy's coefficient of friction when we have prior information of other parameters used. Darcy's Coefficient of Friction is denoted by f symbol.

How to calculate Darcy's Coefficient of Friction given Internal Radius of Pipe using this online calculator? To use this online calculator for Darcy's Coefficient of Friction given Internal Radius of Pipe, enter Head Loss (h_f), Pipe Radius (R), Length of Pipe (L_p) & Average Velocity in Pipe Fluid Flow (v_avg) and hit the calculate button. Here is how the Darcy's Coefficient of Friction given Internal Radius of Pipe calculation can be explained with given input values -> 0.045077 = (1.2*[g]*0.2)/(2.5*(4.57)^2).

FAQ

What is Darcy's Coefficient of Friction given Internal Radius of Pipe?

The Darcy's Coefficient of Friction given Internal Radius of Pipe is defined as the value of darcy's coefficient of friction when we have prior information of other parameters used and is represented as f = (h_f*[g]*R)/(L_p*(v_avg)^2) or Darcy's Coefficient of Friction = (Head Loss*[g]*Pipe Radius)/(Length of Pipe*(Average Velocity in Pipe Fluid Flow)^2). Head Loss is a measure of the reduction in the total head (sum of elevation head, velocity head and pressure head) of the fluid as it moves through a fluid system, The Pipe Radius is the radius of the pipe through which the fluid is flowing, Length of Pipe describes the length of the pipe in which the liquid is flowing & Average Velocity in Pipe Fluid Flow is the total volumetric flow rate divided by the cross-sectional area of the pipe.

How to calculate Darcy's Coefficient of Friction given Internal Radius of Pipe?

The Darcy's Coefficient of Friction given Internal Radius of Pipe is defined as the value of darcy's coefficient of friction when we have prior information of other parameters used is calculated using Darcy's Coefficient of Friction = (Head Loss*[g]*Pipe Radius)/(Length of Pipe*(Average Velocity in Pipe Fluid Flow)^2). To calculate Darcy's Coefficient of Friction given Internal Radius of Pipe, you need Head Loss (h_f), Pipe Radius (R), Length of Pipe (L_p) & Average Velocity in Pipe Fluid Flow (v_avg). With our tool, you need to enter the respective value for Head Loss, Pipe Radius, Length of Pipe & Average Velocity in Pipe Fluid Flow and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Darcy's Coefficient of Friction?

In this formula, Darcy's Coefficient of Friction uses Head Loss, Pipe Radius, Length of Pipe & Average Velocity in Pipe Fluid Flow. We can use 1 other way(s) to calculate the same, which is/are as follows -

Darcy's Coefficient of Friction = (Head Loss*2*[g]*Diameter of Pipe)/(4*Length of Pipe*(Average Velocity in Pipe Fluid Flow)^2)

Home

FREE PDFs

🔍 Search