D Inverse Parameter (A'B'C'D'-Parameter) Calculator

✖Current in port 2 is the magnitude of current flowing through port 2.ⓘ Current in Port 2 [I₂]			+10% -10%
✖Current in port 1 is the magnitude of current flowing through port 1.ⓘ Current in Port 1 [I₁]			+10% -10%

✖D Inverse Parameter is forward short-circuited current gain.ⓘ D Inverse Parameter (A'B'C'D'-Parameter) [D']

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Two Port Parameters Formulas PDF PDF Image

D Inverse Parameter (A'B'C'D'-Parameter) Solution

STEP 0: Pre-Calculation Summary

Formula Used

D Inverse Parameter = -Current in Port 2/Current in Port 1
D' = -I₂/I₁
This formula uses 3 Variables

Variables Used

D Inverse Parameter - D Inverse Parameter is forward short-circuited current gain.
Current in Port 2 - (Measured in Ampere) - Current in port 2 is the magnitude of current flowing through port 2.
Current in Port 1 - (Measured in Ampere) - Current in port 1 is the magnitude of current flowing through port 1.

STEP 1: Convert Input(s) to Base Unit

Current in Port 2: 1.02 Ampere --> 1.02 Ampere No Conversion Required
Current in Port 1: 0.8 Ampere --> 0.8 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D' = -I₂/I₁ --> -1.02/0.8

Evaluating ... ...

D' = -1.275

STEP 3: Convert Result to Output's Unit

-1.275 --> No Conversion Required

FINAL ANSWER

-1.275 <-- D Inverse Parameter

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » Two Port Network » Two Port Parameters » D Inverse Parameter (A'B'C'D'-Parameter)

Credits

Created by Ganesh Dahiwal

Veermata Jijabai Technological Institute (VJTI), Mumbai,Maharashtra

Ganesh Dahiwal has created this Calculator and 4 more calculators!

Verified by Aman Dhussawat

GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI

Aman Dhussawat has verified this Calculator and 100+ more calculators!

< Two Port Parameters Calculators

Driving Point Output Impedance (Z22)

LaTeX Go Z22 Parameter = Voltage Port 2/Current in Port 2

Driving Point Input Impedance (Z11)

LaTeX Go Z11 Parameter = Voltage Port 1/Current in Port 1

Output Transfer Impedance (Z21)

LaTeX Go Z21 Parameter = Voltage Port 2/Current in Port 1

Input Transfer Impedance (Z12)

LaTeX Go Z12 Parameter = Voltage Port 1/Current in Port 2

D Inverse Parameter (A'B'C'D'-Parameter) Formula

LaTeX Go

D Inverse Parameter = -Current in Port 2/Current in Port 1
D' = -I₂/I₁

When we calculate the D' parameter of two port network of A'B'C'D' parameter?

The D' parameter of two port network is T’ parameters are called as inverse transmission parameters or A’B’C’D’ parameters. The parameter D’ do not have any units & this is dimension less. The units of parameters, B’ and C’, are Ohm and Mho respectively.we can calculate the parameter D’, by doing a short circuit of port1 of given network.

How to Calculate D Inverse Parameter (A'B'C'D'-Parameter)?

D Inverse Parameter (A'B'C'D'-Parameter) calculator uses D Inverse Parameter = -Current in Port 2/Current in Port 1 to calculate the D Inverse Parameter, D Inverse Parameter (A'B'C'D'-Parameter) is T’ parameters are called as inverse transmission parameters or A’B’C’D’ parameters. The parameters D’ do not have any unit, since they are dimension less. D Inverse Parameter is denoted by D' symbol.

How to calculate D Inverse Parameter (A'B'C'D'-Parameter) using this online calculator? To use this online calculator for D Inverse Parameter (A'B'C'D'-Parameter), enter Current in Port 2 (I₂) & Current in Port 1 (I₁) and hit the calculate button. Here is how the D Inverse Parameter (A'B'C'D'-Parameter) calculation can be explained with given input values -> -1.275 = -1.02/0.8.

FAQ

What is D Inverse Parameter (A'B'C'D'-Parameter)?

D Inverse Parameter (A'B'C'D'-Parameter) is T’ parameters are called as inverse transmission parameters or A’B’C’D’ parameters. The parameters D’ do not have any unit, since they are dimension less and is represented as D' = -I₂/I₁ or D Inverse Parameter = -Current in Port 2/Current in Port 1. Current in port 2 is the magnitude of current flowing through port 2 & Current in port 1 is the magnitude of current flowing through port 1.

How to calculate D Inverse Parameter (A'B'C'D'-Parameter)?

D Inverse Parameter (A'B'C'D'-Parameter) is T’ parameters are called as inverse transmission parameters or A’B’C’D’ parameters. The parameters D’ do not have any unit, since they are dimension less is calculated using D Inverse Parameter = -Current in Port 2/Current in Port 1. To calculate D Inverse Parameter (A'B'C'D'-Parameter), you need Current in Port 2 (I₂) & Current in Port 1 (I₁). With our tool, you need to enter the respective value for Current in Port 2 & Current in Port 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search