Cycle Time given Trips per Hour for Excavating Scrap Calculator

✖Working Time in Scraper Production is the ratio of time which is expressed in hr/hr.ⓘ Working Time in Scraper Production [W_T]			+10% -10%
✖Trips per Hour means the total transfer occured in a hour.ⓘ Trips per Hour [f]			+10% -10%

✖Cycle Time is the time taken to complete one trip.ⓘ Cycle Time given Trips per Hour for Excavating Scrap [C_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Cycle Time given Trips per Hour for Excavating Scrap Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cycle Time = (Working Time in Scraper Production/Trips per Hour)
C_t = (W_T/f)
This formula uses 3 Variables

Variables Used

Cycle Time - (Measured in Second) - Cycle Time is the time taken to complete one trip.
Working Time in Scraper Production - Working Time in Scraper Production is the ratio of time which is expressed in hr/hr.
Trips per Hour - (Measured in Hertz) - Trips per Hour means the total transfer occured in a hour.

STEP 1: Convert Input(s) to Base Unit

Working Time in Scraper Production: 22.8 --> No Conversion Required
Trips per Hour: 4 Revolution per Hour --> 0.00111111111111111 Hertz (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_t = (W_T/f) --> (22.8/0.00111111111111111)

Evaluating ... ...

C_t = 20520

STEP 3: Convert Result to Output's Unit

20520 Second -->5.70000000000001 Hour (Check conversion here)

FINAL ANSWER

5.70000000000001 ≈ 5.7 Hour <-- Cycle Time

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Cycle Time given Trips per Hour for Excavating Scrap

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Cycle Time given Trips per Hour for Excavating Scrap Formula

LaTeX Go

Cycle Time = (Working Time in Scraper Production/Trips per Hour)
C_t = (W_T/f)

What is Cycle Time?

Cycle Time is the amount of time a team spends actually working on producing an item, up until the product is ready for shipment. It is the time it takes to complete one task.

How to Calculate Cycle Time given Trips per Hour for Excavating Scrap?

Cycle Time given Trips per Hour for Excavating Scrap calculator uses Cycle Time = (Working Time in Scraper Production/Trips per Hour) to calculate the Cycle Time, The Cycle Time given Trips per Hour For Excavating Scrap is defined as the amount of time actually required to complete the work. Cycle Time is denoted by C_t symbol.

How to calculate Cycle Time given Trips per Hour for Excavating Scrap using this online calculator? To use this online calculator for Cycle Time given Trips per Hour for Excavating Scrap, enter Working Time in Scraper Production (W_T) & Trips per Hour (f) and hit the calculate button. Here is how the Cycle Time given Trips per Hour for Excavating Scrap calculation can be explained with given input values -> 0.001583 = (22.8/0.00111111111111111).

FAQ

What is Cycle Time given Trips per Hour for Excavating Scrap?

The Cycle Time given Trips per Hour For Excavating Scrap is defined as the amount of time actually required to complete the work and is represented as C_t = (W_T/f) or Cycle Time = (Working Time in Scraper Production/Trips per Hour). Working Time in Scraper Production is the ratio of time which is expressed in hr/hr & Trips per Hour means the total transfer occured in a hour.

How to calculate Cycle Time given Trips per Hour for Excavating Scrap?

The Cycle Time given Trips per Hour For Excavating Scrap is defined as the amount of time actually required to complete the work is calculated using Cycle Time = (Working Time in Scraper Production/Trips per Hour). To calculate Cycle Time given Trips per Hour for Excavating Scrap, you need Working Time in Scraper Production (W_T) & Trips per Hour (f). With our tool, you need to enter the respective value for Working Time in Scraper Production & Trips per Hour and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search