Cutting Velocity using Taylor's Tool Life and Intercept Calculator

✖Taylors Intercept or Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.ⓘ Taylors Intercept or Taylor's Constant [X]			+10% -10%
✖Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.ⓘ Tool Life in Cutting Velocity [T_v]			+10% -10%
✖Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear.ⓘ Taylors Tool Life Exponent in Cutting Velocity [x]			+10% -10%

✖Taylor Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).ⓘ Cutting Velocity using Taylor's Tool Life and Intercept [V'_cut]

⎘ Copy

👎

Formula

✖

Cutting Velocity using Taylor's Tool Life and Intercept

Formula

V' cut = \frac{X}{{T v}^{x}}

Example

0.068744 m/s = \frac{85.13060}{{4499.4 s}^{.846624}}

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Cutting Velocity using Taylor's Tool Life and Intercept Solution

STEP 0: Pre-Calculation Summary

Formula Used

Taylor Cutting Velocity = Taylors Intercept or Taylor's Constant/(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)
V'_cut = X/(T_v^x)
This formula uses 4 Variables

Variables Used

Taylor Cutting Velocity - (Measured in Meter per Second) - Taylor Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).
Taylors Intercept or Taylor's Constant - Taylors Intercept or Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.
Tool Life in Cutting Velocity - (Measured in Second) - Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.
Taylors Tool Life Exponent in Cutting Velocity - Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear.

STEP 1: Convert Input(s) to Base Unit

Taylors Intercept or Taylor's Constant: 85.1306 --> No Conversion Required
Tool Life in Cutting Velocity: 4499.4 Second --> 4499.4 Second No Conversion Required
Taylors Tool Life Exponent in Cutting Velocity: 0.846624 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V'_cut = X/(T_v^x) --> 85.1306/(4499.4^0.846624)

Evaluating ... ...

V'_cut = 0.0687444008014727

STEP 3: Convert Result to Output's Unit

0.0687444008014727 Meter per Second --> No Conversion Required

FINAL ANSWER

0.0687444008014727 ≈ 0.068744 Meter per Second <-- Taylor Cutting Velocity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Tool Life and Tool Wear » Cutting Velocity » Cutting Velocity using Taylor's Tool Life and Intercept

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< Cutting Velocity Calculators

Cutting Velocity using Taylor's Tool Life and Intercept

Go Taylor Cutting Velocity = Taylors Intercept or Taylor's Constant/(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)

Resultant Cutting Velocity

Go Resultant Cutting Velocity = Cutting Velocity/cos((Cutting Speed Angle))

Feed for Sintered-Carbide Tools using Crater Depth

Go Feed Rate in Cutting Velocity = (Tool Wear Crater Depth-0.06)/0.3

Crater Depth for Sintered-Carbide Tools

Go Tool Wear Crater Depth = 0.06+0.3*Feed Rate in Cutting Velocity

Cutting Velocity using Taylor's Tool Life and Intercept Formula

Taylor Cutting Velocity = Taylors Intercept or Taylor's Constant/(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)
V'_cut = X/(T_v^x)

Taylor's Tool Life Equation

This relationship is credited to F. W. Taylor (~1900). It gives the relation between cutting speed and tool life.
VTⁿ = C
where V= Cutting Velocity, T= Tool Life, n and C are Taylor's Constant.

How to Calculate Cutting Velocity using Taylor's Tool Life and Intercept?

Cutting Velocity using Taylor's Tool Life and Intercept calculator uses Taylor Cutting Velocity = Taylors Intercept or Taylor's Constant/(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity) to calculate the Taylor Cutting Velocity, The Cutting Velocity using Taylor's Tool Life and Intercept is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening is fixed. Taylor Cutting Velocity is denoted by V'_cut symbol.

How to calculate Cutting Velocity using Taylor's Tool Life and Intercept using this online calculator? To use this online calculator for Cutting Velocity using Taylor's Tool Life and Intercept, enter Taylors Intercept or Taylor's Constant (X), Tool Life in Cutting Velocity (T_v) & Taylors Tool Life Exponent in Cutting Velocity (x) and hit the calculate button. Here is how the Cutting Velocity using Taylor's Tool Life and Intercept calculation can be explained with given input values -> 0.068744 = 85.1306/(4499.4^0.846624).

FAQ

What is Cutting Velocity using Taylor's Tool Life and Intercept?

The Cutting Velocity using Taylor's Tool Life and Intercept is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening is fixed and is represented as V'_cut = X/(T_v^x) or Taylor Cutting Velocity = Taylors Intercept or Taylor's Constant/(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity). Taylors Intercept or Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment, Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations & Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear.

How to calculate Cutting Velocity using Taylor's Tool Life and Intercept?

The Cutting Velocity using Taylor's Tool Life and Intercept is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening is fixed is calculated using Taylor Cutting Velocity = Taylors Intercept or Taylor's Constant/(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity). To calculate Cutting Velocity using Taylor's Tool Life and Intercept, you need Taylors Intercept or Taylor's Constant (X), Tool Life in Cutting Velocity (T_v) & Taylors Tool Life Exponent in Cutting Velocity (x). With our tool, you need to enter the respective value for Taylors Intercept or Taylor's Constant, Tool Life in Cutting Velocity & Taylors Tool Life Exponent in Cutting Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search