✖Taylors Intercept or Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.ⓘ Taylors Intercept or Taylor's Constant [X]			+10% -10%
✖Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.ⓘ Tool Life in Cutting Velocity [T_v]			+10% -10%
✖Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear.ⓘ Taylors Tool Life Exponent in Cutting Velocity [x]			+10% -10%
✖Feed Rate in Cutting Velocity is defined as the tool's distance travelled during one spindle revolution.ⓘ Feed Rate in Cutting Velocity [f_r]			+10% -10%
✖Taylors Exponent For Feed Rate in Cutting Velocity is an experimental exponent used to draw a relation between feed rate to workpiece and tool life.ⓘ Taylors Exponent For Feed Rate in Cutting Velocity [e]			+10% -10%
✖Cut Depth is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.ⓘ Cut Depth [d_c]			+10% -10%
✖Taylor's Exponent in Cutting Velocity is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life.ⓘ Taylor's Exponent in Cutting Velocity [d]			+10% -10%

✖The Cut Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).ⓘ Cutting Velocity for given Taylor's Tool Life [V_cut]

⎘ Copy

👎

Formula

✖

Cutting Velocity for given Taylor's Tool Life

Formula

`"V"_{"cut"} = "X"/(("T"_{"v"}^"x")*("f"_{"r"}^"e")*("d"_{"c"}^"d"))`

Example

`"0.797435m/s"="85.13060"/((("4499.4s")^".846624")*(("0.700mm/rev")^"0.1999")*(("0.0130m")^"0.23"))`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Cutting Velocity for given Taylor's Tool Life Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cut Velocity = Taylors Intercept or Taylor's Constant/((Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)*(Feed Rate in Cutting Velocity^Taylors Exponent For Feed Rate in Cutting Velocity)*(Cut Depth^Taylor's Exponent in Cutting Velocity))
V_cut = X/((T_v^x)*(f_r^e)*(d_c^d))
This formula uses 8 Variables

Variables Used

Cut Velocity - (Measured in Meter per Second) - The Cut Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).
Taylors Intercept or Taylor's Constant - Taylors Intercept or Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.
Tool Life in Cutting Velocity - (Measured in Second) - Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.
Taylors Tool Life Exponent in Cutting Velocity - Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear.
Feed Rate in Cutting Velocity - (Measured in Meter Per Revolution) - Feed Rate in Cutting Velocity is defined as the tool's distance travelled during one spindle revolution.
Taylors Exponent For Feed Rate in Cutting Velocity - Taylors Exponent For Feed Rate in Cutting Velocity is an experimental exponent used to draw a relation between feed rate to workpiece and tool life.
Cut Depth - (Measured in Meter) - Cut Depth is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.
Taylor's Exponent in Cutting Velocity - Taylor's Exponent in Cutting Velocity is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life.

STEP 1: Convert Input(s) to Base Unit

Taylors Intercept or Taylor's Constant: 85.1306 --> No Conversion Required
Tool Life in Cutting Velocity: 4499.4 Second --> 4499.4 Second No Conversion Required
Taylors Tool Life Exponent in Cutting Velocity: 0.846624 --> No Conversion Required
Feed Rate in Cutting Velocity: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)
Taylors Exponent For Feed Rate in Cutting Velocity: 0.1999 --> No Conversion Required
Cut Depth: 0.013 Meter --> 0.013 Meter No Conversion Required
Taylor's Exponent in Cutting Velocity: 0.23 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_cut = X/((T_v^x)*(f_r^e)*(d_c^d)) --> 85.1306/((4499.4^0.846624)*(0.0007^0.1999)*(0.013^0.23))

Evaluating ... ...

V_cut = 0.797434941961776

STEP 3: Convert Result to Output's Unit

0.797434941961776 Meter per Second --> No Conversion Required

FINAL ANSWER

0.797434941961776 ≈ 0.797435 Meter per Second <-- Cut Velocity

(Calculation completed in 00.012 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Tool Life and Tool Wear » Cutting Velocity » Cutting Velocity for given Taylor's Tool Life

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< 13 Cutting Velocity Calculators

Cutting Velocity for given Taylor's Tool Life

Go Cut Velocity = Taylors Intercept or Taylor's Constant/((Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)*(Feed Rate in Cutting Velocity^Taylors Exponent For Feed Rate in Cutting Velocity)*(Cut Depth^Taylor's Exponent in Cutting Velocity))

Taylor's Exponent given Cutting Velocities, Tool Lives for two Machining Conditions

Go Taylors Tool Life Exponent in Cutting Velocity = (-1)*ln(Cut Velocity/Reference Cutting Velocity in Cutting Velocity)/ln(Tool Life in Cutting Velocity/Reference Tool Life in Cutting Velocity)

Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition

Go Reference Cutting Velocity in Cutting Velocity = Cut Velocity/((Reference Tool Life in Cutting Velocity/Tool Life in Cutting Velocity)^Taylors Tool Life Exponent in Cutting Velocity)

Cutting Velocity given Tool Lives and Cutting Velocity for Reference Machining Condition

Go Cut Velocity = Reference Cutting Velocity in Cutting Velocity*(Reference Tool Life in Cutting Velocity/Tool Life in Cutting Velocity)^Taylors Tool Life Exponent in Cutting Velocity

Taylor's Intercept given Cutting Velocity and Taylor's Tool Life

Go Taylors Intercept or Taylor's Constant = Taylor Cutting Velocity*(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)

Cutting Velocity using Taylor's Tool Life and Intercept

Go Taylor Cutting Velocity = Taylors Intercept or Taylor's Constant/(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)

Cutting Velocity for given Tool Life and Volume of Metal Removed

Go Cut Velocity = Volume of Metal Removed/(Tool Life in Cutting Velocity*Feed Rate in Cutting Velocity*Cut Depth)

Resultant Cutting Velocity

Go Resultant Cutting Velocity = Cutting Velocity/cos((Cutting Speed Angle))

Cutting Speed of Free-Cutting Steel given Cutting Velocity of Tool and Machinability Index

Go Cutting Speed of Free-Cutting Steel = Cut Velocity*100/Machinability Index of A Material

Cutting Velocity using Machinability Index

Go Cut Velocity = Machinability Index of A Material*Cutting Speed of Free-Cutting Steel/100

Machinability Index

Go Machinability Index of A Material = Cut Velocity*100/Cutting Speed of Free-Cutting Steel

Feed for Sintered-Carbide Tools using Crater Depth

Go Feed Rate in Cutting Velocity = (Tool Wear Crater Depth-0.06)/0.3

Crater Depth for Sintered-Carbide Tools

Go Tool Wear Crater Depth = 0.06+0.3*Feed Rate in Cutting Velocity

Cutting Velocity for given Taylor's Tool Life Formula

Modified Taylor's Tool Life Equation and Effects of Cutting Speed on Tool Life

The modified Taylor's Tool Life equation is given as:
VTⁿf^ad^b=C
Cutting speed affects tool life greatly. Increasing cutting speed increases cutting temperature and results in shortening tool life. Cutting speed varies depending on the type and hardness of the work material. Selecting a tool grade suitable for the cutting speed is necessary.

How to Calculate Cutting Velocity for given Taylor's Tool Life?

Cutting Velocity for given Taylor's Tool Life calculator uses Cut Velocity = Taylors Intercept or Taylor's Constant/((Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)*(Feed Rate in Cutting Velocity^Taylors Exponent For Feed Rate in Cutting Velocity)*(Cut Depth^Taylor's Exponent in Cutting Velocity)) to calculate the Cut Velocity, The Cutting Velocity for given Taylor's Tool Life is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening, the feed, and the Depth of Cut is fixed. Cut Velocity is denoted by V_cut symbol.

How to calculate Cutting Velocity for given Taylor's Tool Life using this online calculator? To use this online calculator for Cutting Velocity for given Taylor's Tool Life, enter Taylors Intercept or Taylor's Constant (X), Tool Life in Cutting Velocity (T_v), Taylors Tool Life Exponent in Cutting Velocity (x), Feed Rate in Cutting Velocity (f_r), Taylors Exponent For Feed Rate in Cutting Velocity (e), Cut Depth (d_c) & Taylor's Exponent in Cutting Velocity (d) and hit the calculate button. Here is how the Cutting Velocity for given Taylor's Tool Life calculation can be explained with given input values -> 0.797435 = 85.1306/((4499.4^0.846624)*(0.0007^0.1999)*(0.013^0.23)).

FAQ

What is Cutting Velocity for given Taylor's Tool Life?

The Cutting Velocity for given Taylor's Tool Life is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening, the feed, and the Depth of Cut is fixed and is represented as V_cut = X/((T_v^x)*(f_r^e)*(d_c^d)) or Cut Velocity = Taylors Intercept or Taylor's Constant/((Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)*(Feed Rate in Cutting Velocity^Taylors Exponent For Feed Rate in Cutting Velocity)*(Cut Depth^Taylor's Exponent in Cutting Velocity)). Taylors Intercept or Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment, Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations, Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear, Feed Rate in Cutting Velocity is defined as the tool's distance travelled during one spindle revolution, Taylors Exponent For Feed Rate in Cutting Velocity is an experimental exponent used to draw a relation between feed rate to workpiece and tool life, Cut Depth is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction & Taylor's Exponent in Cutting Velocity is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life.

How to calculate Cutting Velocity for given Taylor's Tool Life?

The Cutting Velocity for given Taylor's Tool Life is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening, the feed, and the Depth of Cut is fixed is calculated using Cut Velocity = Taylors Intercept or Taylor's Constant/((Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)*(Feed Rate in Cutting Velocity^Taylors Exponent For Feed Rate in Cutting Velocity)*(Cut Depth^Taylor's Exponent in Cutting Velocity)). To calculate Cutting Velocity for given Taylor's Tool Life, you need Taylors Intercept or Taylor's Constant (X), Tool Life in Cutting Velocity (T_v), Taylors Tool Life Exponent in Cutting Velocity (x), Feed Rate in Cutting Velocity (f_r), Taylors Exponent For Feed Rate in Cutting Velocity (e), Cut Depth (d_c) & Taylor's Exponent in Cutting Velocity (d). With our tool, you need to enter the respective value for Taylors Intercept or Taylor's Constant, Tool Life in Cutting Velocity, Taylors Tool Life Exponent in Cutting Velocity, Feed Rate in Cutting Velocity, Taylors Exponent For Feed Rate in Cutting Velocity, Cut Depth & Taylor's Exponent in Cutting Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Cut Velocity?

In this formula, Cut Velocity uses Taylors Intercept or Taylor's Constant, Tool Life in Cutting Velocity, Taylors Tool Life Exponent in Cutting Velocity, Feed Rate in Cutting Velocity, Taylors Exponent For Feed Rate in Cutting Velocity, Cut Depth & Taylor's Exponent in Cutting Velocity. We can use 3 other way(s) to calculate the same, which is/are as follows -

Cut Velocity = Reference Cutting Velocity in Cutting Velocity*(Reference Tool Life in Cutting Velocity/Tool Life in Cutting Velocity)^Taylors Tool Life Exponent in Cutting Velocity
Cut Velocity = Volume of Metal Removed/(Tool Life in Cutting Velocity*Feed Rate in Cutting Velocity*Cut Depth)
Cut Velocity = Machinability Index of A Material*Cutting Speed of Free-Cutting Steel/100

Home

FREE PDFs

🔍 Search