Current-1 given Voltage-1 (H-Parameter) Calculator

✖Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.ⓘ Voltage Port 1 [V₁]			+10% -10%
✖H12 Parameter is open circuit reverse voltage gain.ⓘ H12 Parameter [h₁₂]			+10% -10%
✖Voltage port 2 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.ⓘ Voltage Port 2 [V₂]			+10% -10%
✖H11 Parameter is short circuit input impedance.ⓘ H11 Parameter [h₁₁]			+10% -10%

✖Current in port 1 is the magnitude of current flowing through port 1.ⓘ Current-1 given Voltage-1 (H-Parameter) [I₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Two Port Network Formula PDF PDF Image

Current-1 given Voltage-1 (H-Parameter) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Current in Port 1 = (Voltage Port 1-(H12 Parameter*Voltage Port 2))/H11 Parameter
I₁ = (V₁-(h₁₂*V₂))/h₁₁
This formula uses 5 Variables

Variables Used

Current in Port 1 - (Measured in Ampere) - Current in port 1 is the magnitude of current flowing through port 1.
Voltage Port 1 - (Measured in Volt) - Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
H12 Parameter - H12 Parameter is open circuit reverse voltage gain.
Voltage Port 2 - (Measured in Volt) - Voltage port 2 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
H11 Parameter - (Measured in Ohm) - H11 Parameter is short circuit input impedance.

STEP 1: Convert Input(s) to Base Unit

Voltage Port 1: 440 Volt --> 440 Volt No Conversion Required
H12 Parameter: 2.12 --> No Conversion Required
Voltage Port 2: 220 Volt --> 220 Volt No Conversion Required
H11 Parameter: 2.11 Ohm --> 2.11 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I₁ = (V₁-(h₁₂*V₂))/h₁₁ --> (440-(2.12*220))/2.11

Evaluating ... ...

I₁ = -12.5118483412322

STEP 3: Convert Result to Output's Unit

-12.5118483412322 Ampere --> No Conversion Required

FINAL ANSWER

-12.5118483412322 ≈ -12.511848 Ampere <-- Current in Port 1

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » Two Port Network » H Parameters » Current-1 given Voltage-1 (H-Parameter)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< H Parameters Calculators

Current-2 (H-Parameter)

LaTeX Go Current in Port 2 = (H22 Parameter*Voltage Port 2)+(H21 Parameter*Current in Port 1)

H11 Parameter (H-Parameter)

LaTeX Go H11 Parameter = Voltage Port 1/Current in Port 1

H22 Parameter (H-Parameter)

LaTeX Go H22 Parameter = Current in Port 2/Voltage Port 2

H12 Parameter (H-Parameter)

LaTeX Go H12 Parameter = Voltage Port 1/Voltage Port 2

Current-1 given Voltage-1 (H-Parameter) Formula

LaTeX Go

Current in Port 1 = (Voltage Port 1-(H12 Parameter*Voltage Port 2))/H11 Parameter
I₁ = (V₁-(h₁₂*V₂))/h₁₁

What are hybrid parameters?

Hybrid parameters (also known as h parameters) are known as 'hybrid' parameters as they use Z parameters, Y parameters, voltage ratio, and current ratios to represent the relationship between voltage and current in a two-port network.

How to Calculate Current-1 given Voltage-1 (H-Parameter)?

Current-1 given Voltage-1 (H-Parameter) calculator uses Current in Port 1 = (Voltage Port 1-(H12 Parameter*Voltage Port 2))/H11 Parameter to calculate the Current in Port 1, The Current-1 given Voltage-1 (H-parameter) formula is defined as the current at port-1 of the h-parameters or hybrid parameters. Current in Port 1 is denoted by I₁ symbol.

How to calculate Current-1 given Voltage-1 (H-Parameter) using this online calculator? To use this online calculator for Current-1 given Voltage-1 (H-Parameter), enter Voltage Port 1 (V₁), H12 Parameter (h₁₂), Voltage Port 2 (V₂) & H11 Parameter (h₁₁) and hit the calculate button. Here is how the Current-1 given Voltage-1 (H-Parameter) calculation can be explained with given input values -> -12.511848 = (440-(2.12*220))/2.11.

FAQ

What is Current-1 given Voltage-1 (H-Parameter)?

The Current-1 given Voltage-1 (H-parameter) formula is defined as the current at port-1 of the h-parameters or hybrid parameters and is represented as I₁ = (V₁-(h₁₂*V₂))/h₁₁ or Current in Port 1 = (Voltage Port 1-(H12 Parameter*Voltage Port 2))/H11 Parameter. Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light, H12 Parameter is open circuit reverse voltage gain, Voltage port 2 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light & H11 Parameter is short circuit input impedance.

How to calculate Current-1 given Voltage-1 (H-Parameter)?

The Current-1 given Voltage-1 (H-parameter) formula is defined as the current at port-1 of the h-parameters or hybrid parameters is calculated using Current in Port 1 = (Voltage Port 1-(H12 Parameter*Voltage Port 2))/H11 Parameter. To calculate Current-1 given Voltage-1 (H-Parameter), you need Voltage Port 1 (V₁), H12 Parameter (h₁₂), Voltage Port 2 (V₂) & H11 Parameter (h₁₁). With our tool, you need to enter the respective value for Voltage Port 1, H12 Parameter, Voltage Port 2 & H11 Parameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Current in Port 1?

In this formula, Current in Port 1 uses Voltage Port 1, H12 Parameter, Voltage Port 2 & H11 Parameter. We can use 3 other way(s) to calculate the same, which is/are as follows -

Current in Port 1 = Current in Port 2/H21 Parameter
Current in Port 1 = Voltage Port 1/H11 Parameter
Current in Port 1 = (Current in Port 2-(H22 Parameter*Voltage Port 2))/H21 Parameter

Home

FREE PDFs

🔍 Search