Current-1 given H11 Parameter (H-Parameter) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Current in Port 1 = Voltage Port 1/H11 Parameter
I1 = V1/h11
This formula uses 3 Variables
Variables Used
Current in Port 1 - (Measured in Ampere) - Current in port 1 is the magnitude of current flowing through port 1.
Voltage Port 1 - (Measured in Volt) - Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
H11 Parameter - (Measured in Ohm) - H11 Parameter is short circuit input impedance.
STEP 1: Convert Input(s) to Base Unit
Voltage Port 1: 440 Volt --> 440 Volt No Conversion Required
H11 Parameter: 2.11 Ohm --> 2.11 Ohm No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
I1 = V1/h11 --> 440/2.11
Evaluating ... ...
I1 = 208.530805687204
STEP 3: Convert Result to Output's Unit
208.530805687204 Ampere --> No Conversion Required
FINAL ANSWER
208.530805687204 208.5308 Ampere <-- Current in Port 1
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

H Parameters Calculators

Current-2 (H-Parameter)
​ LaTeX ​ Go Current in Port 2 = (H22 Parameter*Voltage Port 2)+(H21 Parameter*Current in Port 1)
H11 Parameter (H-Parameter)
​ LaTeX ​ Go H11 Parameter = Voltage Port 1/Current in Port 1
H22 Parameter (H-Parameter)
​ LaTeX ​ Go H22 Parameter = Current in Port 2/Voltage Port 2
H12 Parameter (H-Parameter)
​ LaTeX ​ Go H12 Parameter = Voltage Port 1/Voltage Port 2

Current-1 given H11 Parameter (H-Parameter) Formula

​LaTeX ​Go
Current in Port 1 = Voltage Port 1/H11 Parameter
I1 = V1/h11

What are hybrid parameters?

Hybrid parameters (also known as h parameters) are known as 'hybrid' parameters as they use Z parameters, Y parameters, voltage ratio, and current ratios to represent the relationship between voltage and current in a two-port network.

How to Calculate Current-1 given H11 Parameter (H-Parameter)?

Current-1 given H11 Parameter (H-Parameter) calculator uses Current in Port 1 = Voltage Port 1/H11 Parameter to calculate the Current in Port 1, The Current-1 given H11 Parameter (H-parameter) formula is defined as the current at port-1 of the h-parameters or hybrid parameters. Current in Port 1 is denoted by I1 symbol.

How to calculate Current-1 given H11 Parameter (H-Parameter) using this online calculator? To use this online calculator for Current-1 given H11 Parameter (H-Parameter), enter Voltage Port 1 (V1) & H11 Parameter (h11) and hit the calculate button. Here is how the Current-1 given H11 Parameter (H-Parameter) calculation can be explained with given input values -> 208.5308 = 440/2.11.

FAQ

What is Current-1 given H11 Parameter (H-Parameter)?
The Current-1 given H11 Parameter (H-parameter) formula is defined as the current at port-1 of the h-parameters or hybrid parameters and is represented as I1 = V1/h11 or Current in Port 1 = Voltage Port 1/H11 Parameter. Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light & H11 Parameter is short circuit input impedance.
How to calculate Current-1 given H11 Parameter (H-Parameter)?
The Current-1 given H11 Parameter (H-parameter) formula is defined as the current at port-1 of the h-parameters or hybrid parameters is calculated using Current in Port 1 = Voltage Port 1/H11 Parameter. To calculate Current-1 given H11 Parameter (H-Parameter), you need Voltage Port 1 (V1) & H11 Parameter (h11). With our tool, you need to enter the respective value for Voltage Port 1 & H11 Parameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Current in Port 1?
In this formula, Current in Port 1 uses Voltage Port 1 & H11 Parameter. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Current in Port 1 = Current in Port 2/H21 Parameter
  • Current in Port 1 = (Voltage Port 1-(H12 Parameter*Voltage Port 2))/H11 Parameter
  • Current in Port 1 = (Current in Port 2-(H22 Parameter*Voltage Port 2))/H21 Parameter
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!