Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model Calculator

✖Parameter 'n' of Infiltration Model by Green-Ampt method taht allows the application of the Green-Ampt infiltration model to any watershed for which soil survey data exists.ⓘ Parameter 'n' of Infiltration Model by Green-Ampt [n]			+10% -10%
✖Infiltration Capacity at Any Time t from the start of the rainfall is the rate at which water percolates in the soil.ⓘ Infiltration Capacity at Any Time t [f_p]			+10% -10%
✖Parameter 'm' of Infiltration Model by Green-Ampt method that allows the application of the Green-Ampt infiltration model to any watershed for which soil survey data exists.ⓘ Parameter 'm' of Infiltration Model by Green-Ampt [m]			+10% -10%

✖Cumulative Infiltration Capacity is calculated by subtracting the cumulative runoff from the cumulative rainfall.ⓘ Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model [F_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Abstractions from Precipitation Formulas PDF PDF Image

Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cumulative Infiltration Capacity = Parameter 'n' of Infiltration Model by Green-Ampt/(Infiltration Capacity at Any Time t-Parameter 'm' of Infiltration Model by Green-Ampt)
F_p = n/(f_p-m)
This formula uses 4 Variables

Variables Used

Cumulative Infiltration Capacity - (Measured in Centimeter per Hour) - Cumulative Infiltration Capacity is calculated by subtracting the cumulative runoff from the cumulative rainfall.
Parameter 'n' of Infiltration Model by Green-Ampt - Parameter 'n' of Infiltration Model by Green-Ampt method taht allows the application of the Green-Ampt infiltration model to any watershed for which soil survey data exists.
Infiltration Capacity at Any Time t - (Measured in Centimeter per Hour) - Infiltration Capacity at Any Time t from the start of the rainfall is the rate at which water percolates in the soil.
Parameter 'm' of Infiltration Model by Green-Ampt - Parameter 'm' of Infiltration Model by Green-Ampt method that allows the application of the Green-Ampt infiltration model to any watershed for which soil survey data exists.

STEP 1: Convert Input(s) to Base Unit

Parameter 'n' of Infiltration Model by Green-Ampt: 40 --> No Conversion Required
Infiltration Capacity at Any Time t: 16 Centimeter per Hour --> 16 Centimeter per Hour No Conversion Required
Parameter 'm' of Infiltration Model by Green-Ampt: 14 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_p = n/(f_p-m) --> 40/(16-14)

Evaluating ... ...

F_p = 20

STEP 3: Convert Result to Output's Unit

5.55555555555556E-05 Meter per Second -->20 Centimeter per Hour (Check conversion here)

FINAL ANSWER

20 Centimeter per Hour <-- Cumulative Infiltration Capacity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Abstractions from Precipitation » Modelling Infiltration Capacity » Infiltration Capacity Equation » Green Ampt Equation (1911) » Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< Green Ampt Equation (1911) Calculators

Darcy's Hydraulic Conductivity given Infiltration Capacity from Green-Ampt Equation

LaTeX Go Darcy's Hydraulic Conductivity = Infiltration Capacity at Any Time t/(1+(Porosity*Capillary Suction at Wetting Front)/Cumulative Infiltration Capacity)

Green Ampt Equation

LaTeX Go Infiltration Capacity at Any Time t = Darcy's Hydraulic Conductivity*(1+(Porosity*Capillary Suction at Wetting Front)/Cumulative Infiltration Capacity)

Porosity of Soil given Infiltration Capacity from Green-Ampt Equation

LaTeX Go Porosity = (Infiltration Capacity at Any Time t/Darcy's Hydraulic Conductivity-1)*Cumulative Infiltration Capacity/Capillary Suction at Wetting Front

Capillary Suction given Infiltration Capacity

LaTeX Go Capillary Suction at Wetting Front = (Infiltration Capacity at Any Time t/Darcy's Hydraulic Conductivity-1)*Cumulative Infiltration Capacity/Porosity

Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model Formula

LaTeX Go

Cumulative Infiltration Capacity = Parameter 'n' of Infiltration Model by Green-Ampt/(Infiltration Capacity at Any Time t-Parameter 'm' of Infiltration Model by Green-Ampt)
F_p = n/(f_p-m)

What is Green Ampt equation?

The basic assumption behind the Green and Ampt equation is that water infiltrates into (relatively) dry soil as a sharp wetting front. The passage of this front causes the moisture content to increase from an initial value to a saturated value.

What is Infiltration Capacity of Soil?

The Infiltration Capacity is defined as the maximum rate of infiltration. It is most often measured in meters per day but can also be measured in other units of distance over time if necessary. The infiltration capacity decreases as the soil moisture content of soils surface layers increases.

How to Calculate Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model?

Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model calculator uses Cumulative Infiltration Capacity = Parameter 'n' of Infiltration Model by Green-Ampt/(Infiltration Capacity at Any Time t-Parameter 'm' of Infiltration Model by Green-Ampt) to calculate the Cumulative Infiltration Capacity, The Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model formula is defined as the infiltration capacity decreases as the soil moisture content of soil surface layers increases. Cumulative Infiltration Capacity is denoted by F_p symbol.

How to calculate Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model using this online calculator? To use this online calculator for Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model, enter Parameter 'n' of Infiltration Model by Green-Ampt (n), Infiltration Capacity at Any Time t (f_p) & Parameter 'm' of Infiltration Model by Green-Ampt (m) and hit the calculate button. Here is how the Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model calculation can be explained with given input values -> 7.2E+6 = 40/(4.44444444444444E-05-14).

FAQ

What is Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model?

The Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model formula is defined as the infiltration capacity decreases as the soil moisture content of soil surface layers increases and is represented as F_p = n/(f_p-m) or Cumulative Infiltration Capacity = Parameter 'n' of Infiltration Model by Green-Ampt/(Infiltration Capacity at Any Time t-Parameter 'm' of Infiltration Model by Green-Ampt). Parameter 'n' of Infiltration Model by Green-Ampt method taht allows the application of the Green-Ampt infiltration model to any watershed for which soil survey data exists, Infiltration Capacity at Any Time t from the start of the rainfall is the rate at which water percolates in the soil & Parameter 'm' of Infiltration Model by Green-Ampt method that allows the application of the Green-Ampt infiltration model to any watershed for which soil survey data exists.

How to calculate Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model?

The Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model formula is defined as the infiltration capacity decreases as the soil moisture content of soil surface layers increases is calculated using Cumulative Infiltration Capacity = Parameter 'n' of Infiltration Model by Green-Ampt/(Infiltration Capacity at Any Time t-Parameter 'm' of Infiltration Model by Green-Ampt). To calculate Cumulative Infiltration Capacity given Green-Ampt Parameters of Infiltration Model, you need Parameter 'n' of Infiltration Model by Green-Ampt (n), Infiltration Capacity at Any Time t (f_p) & Parameter 'm' of Infiltration Model by Green-Ampt (m). With our tool, you need to enter the respective value for Parameter 'n' of Infiltration Model by Green-Ampt, Infiltration Capacity at Any Time t & Parameter 'm' of Infiltration Model by Green-Ampt and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search