Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Calculator

✖The Discharge referred as volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.ⓘ Discharge [Q]			+10% -10%
✖The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids.ⓘ Coefficient of Permeability at 20° C [K]			+10% -10%
✖The Constant Head Difference is referred as difference between the hydraulic head or pressure difference separated by a small distance dl.ⓘ Constant Head Difference [ΔH]			+10% -10%
✖The Length referred as measurement or extent of something from end to end.ⓘ Length [L]			+10% -10%

✖The Cross-Sectional Area is referred as product of width multiplied by average water depth.ⓘ Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered [A]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Coefficient of Permeability Formulas PDF PDF Image

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cross-Sectional Area = Discharge/(Coefficient of Permeability at 20° C*(Constant Head Difference/Length))
A = Q/(K*(ΔH/L))
This formula uses 5 Variables

Variables Used

Cross-Sectional Area - (Measured in Square Meter) - The Cross-Sectional Area is referred as product of width multiplied by average water depth.
Discharge - (Measured in Cubic Meter per Second) - The Discharge referred as volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.
Coefficient of Permeability at 20° C - (Measured in Meter per Second) - The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids.
Constant Head Difference - The Constant Head Difference is referred as difference between the hydraulic head or pressure difference separated by a small distance dl.
Length - (Measured in Meter) - The Length referred as measurement or extent of something from end to end.

STEP 1: Convert Input(s) to Base Unit

Discharge: 3 Cubic Meter per Second --> 3 Cubic Meter per Second No Conversion Required
Coefficient of Permeability at 20° C: 6 Centimeter per Second --> 0.06 Meter per Second (Check conversion here)
Constant Head Difference: 2 --> No Conversion Required
Length: 3.9 Meter --> 3.9 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A = Q/(K*(ΔH/L)) --> 3/(0.06*(2/3.9))

Evaluating ... ...

A = 97.5

STEP 3: Convert Result to Output's Unit

97.5 Square Meter --> No Conversion Required

FINAL ANSWER

97.5 Square Meter <-- Cross-Sectional Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Coefficient of Permeability » Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Coefficient of Permeability Calculators

Hagen Poiseuille Flow or Mean Particle Size of Porous Medium Laminar Flow through Conduit

LaTeX Go Mean Particle Size of the Porous Medium = sqrt((Coefficient of Permeability (Hagen-Poiseuille)*Dynamic Viscosity of the Fluid)/(Shape Factor*(Unit Weight of Fluid/1000)))

Dynamic Viscosity of Fluid of Laminar Flow through Conduit or Hagen Poiseuille Flow

LaTeX Go Dynamic Viscosity of the Fluid = (Shape Factor*Mean Particle Size of the Porous Medium^2)*((Unit Weight of Fluid/1000)/Coefficient of Permeability (Hagen-Poiseuille))

Coefficient of Permeability from Analogy of Laminar Flow (Hagen Poiseuille flow)

LaTeX Go Coefficient of Permeability (Hagen-Poiseuille) = Shape Factor*(Mean Particle Size of the Porous Medium^2)*(Unit Weight of Fluid/1000)/Dynamic Viscosity of the Fluid

Unit weight of fluid

LaTeX Go Unit Weight of Fluid = Density of Fluid*Acceleration due to Gravity

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Formula

LaTeX Go

Cross-Sectional Area = Discharge/(Coefficient of Permeability at 20° C*(Constant Head Difference/Length))
A = Q/(K*(ΔH/L))

What is Aquifer Transmissivity?

Transmissivity describes the ability of the aquifer to transmit groundwater throughout its entire saturated thickness. Transmissivity is measured as the rate at which groundwater can flow through an aquifer section of unit width under a unit hydraulic gradient.

How to Calculate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered calculator uses Cross-Sectional Area = Discharge/(Coefficient of Permeability at 20° C*(Constant Head Difference/Length)) to calculate the Cross-Sectional Area, The Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered formula is defined as an area of land where all water flows to a single stream, river, lake or even ocean. Cross-Sectional Area is denoted by A symbol.

How to calculate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered using this online calculator? To use this online calculator for Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered, enter Discharge (Q), Coefficient of Permeability at 20° C (K), Constant Head Difference (ΔH) & Length (L) and hit the calculate button. Here is how the Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered calculation can be explained with given input values -> 97.5 = 3/(0.06*(2/3.9)).

FAQ

What is Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

The Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered formula is defined as an area of land where all water flows to a single stream, river, lake or even ocean and is represented as A = Q/(K*(ΔH/L)) or Cross-Sectional Area = Discharge/(Coefficient of Permeability at 20° C*(Constant Head Difference/Length)). The Discharge referred as volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material, The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids, The Constant Head Difference is referred as difference between the hydraulic head or pressure difference separated by a small distance dl & The Length referred as measurement or extent of something from end to end.

How to calculate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

The Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered formula is defined as an area of land where all water flows to a single stream, river, lake or even ocean is calculated using Cross-Sectional Area = Discharge/(Coefficient of Permeability at 20° C*(Constant Head Difference/Length)). To calculate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered, you need Discharge (Q), Coefficient of Permeability at 20° C (K), Constant Head Difference (ΔH) & Length (L). With our tool, you need to enter the respective value for Discharge, Coefficient of Permeability at 20° C, Constant Head Difference & Length and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search