Cross-sectional Area of Flow into well given Discharge from Open Well Calculator

✖Discharge in Well is the rate of flow of a liquid in well.ⓘ Discharge in Well [Q]			+10% -10%
✖Percolation Intensity Coefficient is the constant of the formation around the well.ⓘ Percolation Intensity Coefficient [C]			+10% -10%
✖The Depression Height is defined as height of the bottom of a well above the datum.ⓘ Depression Height [H]			+10% -10%

✖Cross-Sectional Area of Well is the the surface area of the interior opening of the well.ⓘ Cross-sectional Area of Flow into well given Discharge from Open Well [A_csw]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Constant Level Pumping Test Formulas PDF PDF Image

Cross-sectional Area of Flow into well given Discharge from Open Well Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cross-Sectional Area of Well = Discharge in Well/(Percolation Intensity Coefficient*Depression Height)
A_csw = Q/(C*H)
This formula uses 4 Variables

Variables Used

Cross-Sectional Area of Well - (Measured in Square Meter) - Cross-Sectional Area of Well is the the surface area of the interior opening of the well.
Discharge in Well - (Measured in Cubic Meter per Second) - Discharge in Well is the rate of flow of a liquid in well.
Percolation Intensity Coefficient - (Measured in Meter per Second) - Percolation Intensity Coefficient is the constant of the formation around the well.
Depression Height - (Measured in Meter) - The Depression Height is defined as height of the bottom of a well above the datum.

STEP 1: Convert Input(s) to Base Unit

Discharge in Well: 0.99 Cubic Meter per Second --> 0.99 Cubic Meter per Second No Conversion Required
Percolation Intensity Coefficient: 0.01 Meter per Second --> 0.01 Meter per Second No Conversion Required
Depression Height: 7 Meter --> 7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_csw = Q/(C*H) --> 0.99/(0.01*7)

Evaluating ... ...

A_csw = 14.1428571428571

STEP 3: Convert Result to Output's Unit

14.1428571428571 Square Meter --> No Conversion Required

FINAL ANSWER

14.1428571428571 ≈ 14.14286 Square Meter <-- Cross-Sectional Area of Well

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Yield of an Open Well » Constant Level Pumping Test » Cross Sectional Area of Well » Cross-sectional Area of Flow into well given Discharge from Open Well

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Cross Sectional Area of Well Calculators

Cross-sectional Area of Well given Specific Capacity

LaTeX Go Cross-Sectional Area given Specific Capacity = Constant Dependent on Base Soil/Specific Capacity

Cross-sectional Area of Well given Specific Capacity for Clay Soil

LaTeX Go Cross-Sectional Area of Well = Discharge in Well/(0.25*Constant Depression Head for Clay Soil)

Cross-sectional Area of Well given Specific Capacity for Coarse Sand

LaTeX Go Cross-Sectional Area of Well = Discharge in Well/(1*Constant Depression Head for Coarse Sand)

Cross-sectional Area of Well given Specific Capacity for Fine Sand

LaTeX Go Cross-Sectional Area of Well = Discharge in Well/(0.5*Constant Depression Head for Fine Soil)

Cross-sectional Area of Flow into well given Discharge from Open Well Formula

LaTeX Go

Cross-Sectional Area of Well = Discharge in Well/(Percolation Intensity Coefficient*Depression Height)
A_csw = Q/(C*H)

What is Cross-Sectional Area?

Cross-sectional area refers to the area of an object or fluid flow, as viewed or cut through at a particular section perpendicular to its length or flow direction. In simpler terms, it's the surface area exposed when an object is sliced across a particular plane. In fluid dynamics and well systems, the cross-sectional area plays a key role in determining flow rates, as it is used in calculating discharge (flow rate). For example, when water flows through a pipe or well, the cross-sectional area of the pipe or well impacts how much water can flow through it at any given time.

How to Calculate Cross-sectional Area of Flow into well given Discharge from Open Well?

Cross-sectional Area of Flow into well given Discharge from Open Well calculator uses Cross-Sectional Area of Well = Discharge in Well/(Percolation Intensity Coefficient*Depression Height) to calculate the Cross-Sectional Area of Well, The Cross-sectional Area of Flow into well given Discharge from Open Well formula is defined as the calculation of value of cross-sectional area of flow when we have prior information of discharge from open well. Cross-Sectional Area of Well is denoted by A_csw symbol.

How to calculate Cross-sectional Area of Flow into well given Discharge from Open Well using this online calculator? To use this online calculator for Cross-sectional Area of Flow into well given Discharge from Open Well, enter Discharge in Well (Q), Percolation Intensity Coefficient (C) & Depression Height (H) and hit the calculate button. Here is how the Cross-sectional Area of Flow into well given Discharge from Open Well calculation can be explained with given input values -> 14.42857 = 0.99/(0.01*7).

FAQ

What is Cross-sectional Area of Flow into well given Discharge from Open Well?

The Cross-sectional Area of Flow into well given Discharge from Open Well formula is defined as the calculation of value of cross-sectional area of flow when we have prior information of discharge from open well and is represented as A_csw = Q/(C*H) or Cross-Sectional Area of Well = Discharge in Well/(Percolation Intensity Coefficient*Depression Height). Discharge in Well is the rate of flow of a liquid in well, Percolation Intensity Coefficient is the constant of the formation around the well & The Depression Height is defined as height of the bottom of a well above the datum.

How to calculate Cross-sectional Area of Flow into well given Discharge from Open Well?

The Cross-sectional Area of Flow into well given Discharge from Open Well formula is defined as the calculation of value of cross-sectional area of flow when we have prior information of discharge from open well is calculated using Cross-Sectional Area of Well = Discharge in Well/(Percolation Intensity Coefficient*Depression Height). To calculate Cross-sectional Area of Flow into well given Discharge from Open Well, you need Discharge in Well (Q), Percolation Intensity Coefficient (C) & Depression Height (H). With our tool, you need to enter the respective value for Discharge in Well, Percolation Intensity Coefficient & Depression Height and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Cross-Sectional Area of Well?

In this formula, Cross-Sectional Area of Well uses Discharge in Well, Percolation Intensity Coefficient & Depression Height. We can use 3 other way(s) to calculate the same, which is/are as follows -

Cross-Sectional Area of Well = Discharge in Well/(0.25*Constant Depression Head for Clay Soil)
Cross-Sectional Area of Well = Discharge in Well/(0.5*Constant Depression Head for Fine Soil)
Cross-Sectional Area of Well = Discharge in Well/(1*Constant Depression Head for Coarse Sand)

Home

FREE PDFs

🔍 Search