Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio Calculator

✖Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.ⓘ Crippling Load [P]			+10% -10%
✖Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.ⓘ Compressive Stress [σ_c]			+10% -10%
✖Straight Line Formula Constant is defined as the constant that depends on the material of column.ⓘ Straight Line Formula Constant [n]			+10% -10%
✖Slenderness Ratio is the ratio of the length of a column and the least radius of gyration of its cross section.ⓘ Slenderness Ratio [λ]			+10% -10%

✖Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio [A_sectional]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio Solution

STEP 0: Pre-Calculation Summary

Formula Used

Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Slenderness Ratio)))
A_sectional = P/(σ_c-(n*(λ)))
This formula uses 5 Variables

Variables Used

Column Cross Sectional Area - (Measured in Square Meter) - Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.
Crippling Load - (Measured in Newton) - Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.
Compressive Stress - (Measured in Pascal) - Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.
Straight Line Formula Constant - Straight Line Formula Constant is defined as the constant that depends on the material of column.
Slenderness Ratio - Slenderness Ratio is the ratio of the length of a column and the least radius of gyration of its cross section.

STEP 1: Convert Input(s) to Base Unit

Crippling Load: 3.6 Kilonewton --> 3600 Newton (Check conversion here)
Compressive Stress: 0.002827 Megapascal --> 2827 Pascal (Check conversion here)
Straight Line Formula Constant: 4 --> No Conversion Required
Slenderness Ratio: 0.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_sectional = P/(σ_c-(n*(λ))) --> 3600/(2827-(4*(0.5)))

Evaluating ... ...

A_sectional = 1.27433628318584

STEP 3: Convert Result to Output's Unit

1.27433628318584 Square Meter --> No Conversion Required

FINAL ANSWER

1.27433628318584 ≈ 1.274336 Square Meter <-- Column Cross Sectional Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Mechanical » Straight Line Formula » Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Straight Line Formula Calculators

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration))

Cross-Sectional Area of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))

Compressive Yield Stress by Straight-Line Formula for Columns and Struts

LaTeX Go Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration))

Crippling Load on Column by Straight-Line Formula

LaTeX Go Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area

Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio Formula

LaTeX Go

Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Slenderness Ratio)))
A_sectional = P/(σ_c-(n*(λ)))

What is Slenderness Ratio in Column?

The slenderness ratio of a reinforced concrete (RC) column is the ratio between the length of the column, its lateral dimensions, and end fixity. The slenderness ratio is calculated by dividing the column length by its radius of gyration. The slenderness ratio differentiates the short column from the long or slender column.

How to Calculate Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio?

Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio calculator uses Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Slenderness Ratio))) to calculate the Column Cross Sectional Area, Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio formula is defined as a measure of the area of a column's cross-section, which is crucial in structural engineering to determine the column's strength and stability, taking into account the slenderness ratio and other critical factors. Column Cross Sectional Area is denoted by A_sectional symbol.

How to calculate Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio using this online calculator? To use this online calculator for Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio, enter Crippling Load (P), Compressive Stress (σ_c), Straight Line Formula Constant (n) & Slenderness Ratio (λ) and hit the calculate button. Here is how the Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio calculation can be explained with given input values -> 0.001125 = 3600/(2827-(4*(0.5))).

FAQ

What is Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio?

Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio formula is defined as a measure of the area of a column's cross-section, which is crucial in structural engineering to determine the column's strength and stability, taking into account the slenderness ratio and other critical factors and is represented as A_sectional = P/(σ_c-(n*(λ))) or Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Slenderness Ratio))). Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability, Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material, Straight Line Formula Constant is defined as the constant that depends on the material of column & Slenderness Ratio is the ratio of the length of a column and the least radius of gyration of its cross section.

How to calculate Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio?

Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio formula is defined as a measure of the area of a column's cross-section, which is crucial in structural engineering to determine the column's strength and stability, taking into account the slenderness ratio and other critical factors is calculated using Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Slenderness Ratio))). To calculate Cross Sectional Area of Column by Straight Line Formula given Slenderness Ratio, you need Crippling Load (P), Compressive Stress (σ_c), Straight Line Formula Constant (n) & Slenderness Ratio (λ). With our tool, you need to enter the respective value for Crippling Load, Compressive Stress, Straight Line Formula Constant & Slenderness Ratio and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Column Cross Sectional Area?

In this formula, Column Cross Sectional Area uses Crippling Load, Compressive Stress, Straight Line Formula Constant & Slenderness Ratio. We can use 1 other way(s) to calculate the same, which is/are as follows -

Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))

Home

FREE PDFs

🔍 Search