Crop Management Factor given Sediment Yield from Individual Storm Solution

STEP 0: Pre-Calculation Summary
Formula Used
Cover Management Factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Support Practice Factor)
C = Y/(11.8*((QV*qp)^0.56)*K*Kzt*P)
This formula uses 7 Variables
Variables Used
Cover Management Factor - Cover Management Factor reflects the effect of cropping and management practices on erosion rates.
Sediment Yield from an Individual Storm - (Measured in Kilogram) - Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment.
Runoff Volume - (Measured in Cubic Meter) - Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point.
Peak Rate of Runoff - (Measured in Cubic Meter per Second) - Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm.
Soil Erodibility Factor - Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact.
Topographic factor - Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors.
Support Practice Factor - Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope.
STEP 1: Convert Input(s) to Base Unit
Sediment Yield from an Individual Storm: 135.7332 Kilogram --> 135.7332 Kilogram No Conversion Required
Runoff Volume: 19.5 Cubic Meter --> 19.5 Cubic Meter No Conversion Required
Peak Rate of Runoff: 1.256 Cubic Meter per Second --> 1.256 Cubic Meter per Second No Conversion Required
Soil Erodibility Factor: 0.17 --> No Conversion Required
Topographic factor: 25 --> No Conversion Required
Support Practice Factor: 0.74 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
C = Y/(11.8*((QV*qp)^0.56)*K*Kzt*P) --> 135.7332/(11.8*((19.5*1.256)^0.56)*0.17*25*0.74)
Evaluating ... ...
C = 0.610000021725401
STEP 3: Convert Result to Output's Unit
0.610000021725401 --> No Conversion Required
FINAL ANSWER
0.610000021725401 0.61 <-- Cover Management Factor
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

Modified Universal Soil Loss Equation Calculators

Storm Runoff Volume given Sediment Yield from Individual Storm
​ LaTeX ​ Go Runoff Volume = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Peak Rate of Runoff
Peak Rate of Runoff given Sediment Yield from Individual Storm
​ LaTeX ​ Go Peak Rate of Runoff = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Runoff Volume
Support Cultivation Practice given Sediment Yield from Individual Storm
​ LaTeX ​ Go Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor)
Sediment Yield from Individual Storm
​ LaTeX ​ Go Sediment Yield from an Individual Storm = 11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor

Crop Management Factor given Sediment Yield from Individual Storm Formula

​LaTeX ​Go
Cover Management Factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Support Practice Factor)
C = Y/(11.8*((QV*qp)^0.56)*K*Kzt*P)

What is Topographic Factor?

The Topographic Factor is defined as the factors concerned with topography or physical features of an area are called topographic factors, including height, direction of slope and steepness of the slope.

What is Sediment Yield?

Sediment yield can be defined as the amount of sediment reaching or passing a point of interest in a given period of time, and sediment yield estimates are normally given as Tonnes per year or kilograms per year.

How to Calculate Crop Management Factor given Sediment Yield from Individual Storm?

Crop Management Factor given Sediment Yield from Individual Storm calculator uses Cover Management Factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Support Practice Factor) to calculate the Cover Management Factor, The Crop Management Factor given Sediment Yield from Individual Storm formula is defined as the most important factor concerning policy and land use decisions, as it represents conditions that can be most easily managed to reduce erosion. Cover Management Factor is denoted by C symbol.

How to calculate Crop Management Factor given Sediment Yield from Individual Storm using this online calculator? To use this online calculator for Crop Management Factor given Sediment Yield from Individual Storm, enter Sediment Yield from an Individual Storm (Y), Runoff Volume (QV), Peak Rate of Runoff (qp), Soil Erodibility Factor (K), Topographic factor (Kzt) & Support Practice Factor (P) and hit the calculate button. Here is how the Crop Management Factor given Sediment Yield from Individual Storm calculation can be explained with given input values -> 0.526649 = 135.7332/(11.8*((19.5*1.256)^0.56)*0.17*25*0.74).

FAQ

What is Crop Management Factor given Sediment Yield from Individual Storm?
The Crop Management Factor given Sediment Yield from Individual Storm formula is defined as the most important factor concerning policy and land use decisions, as it represents conditions that can be most easily managed to reduce erosion and is represented as C = Y/(11.8*((QV*qp)^0.56)*K*Kzt*P) or Cover Management Factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Support Practice Factor). Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment, Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point, Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm, Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact, Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors & Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope.
How to calculate Crop Management Factor given Sediment Yield from Individual Storm?
The Crop Management Factor given Sediment Yield from Individual Storm formula is defined as the most important factor concerning policy and land use decisions, as it represents conditions that can be most easily managed to reduce erosion is calculated using Cover Management Factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Support Practice Factor). To calculate Crop Management Factor given Sediment Yield from Individual Storm, you need Sediment Yield from an Individual Storm (Y), Runoff Volume (QV), Peak Rate of Runoff (qp), Soil Erodibility Factor (K), Topographic factor (Kzt) & Support Practice Factor (P). With our tool, you need to enter the respective value for Sediment Yield from an Individual Storm, Runoff Volume, Peak Rate of Runoff, Soil Erodibility Factor, Topographic factor & Support Practice Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!