Crippling Load on Column by Straight-Line Formula Calculator

✖Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.ⓘ Compressive Stress [σ_c]			+10% -10%
✖Straight Line Formula Constant is defined as the constant that depends on the material of column.ⓘ Straight Line Formula Constant [n]			+10% -10%
✖Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration.ⓘ Effective Column Length [L_eff]			+10% -10%
✖Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations.ⓘ Least Radius of Gyration [r_least]			+10% -10%
✖Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Column Cross Sectional Area [A_sectional]			+10% -10%

✖Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.ⓘ Crippling Load on Column by Straight-Line Formula [P]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Crippling Load on Column by Straight-Line Formula Solution

STEP 0: Pre-Calculation Summary

Formula Used

Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area
P = (σ_c-(n*(L_eff/r_least)))*A_sectional
This formula uses 6 Variables

Variables Used

Crippling Load - (Measured in Newton) - Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.
Compressive Stress - (Measured in Pascal) - Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.
Straight Line Formula Constant - Straight Line Formula Constant is defined as the constant that depends on the material of column.
Effective Column Length - (Measured in Meter) - Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration.
Least Radius of Gyration - (Measured in Meter) - Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations.
Column Cross Sectional Area - (Measured in Square Meter) - Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

STEP 1: Convert Input(s) to Base Unit

Compressive Stress: 0.002827 Megapascal --> 2827 Pascal (Check conversion here)
Straight Line Formula Constant: 4 --> No Conversion Required
Effective Column Length: 3000 Millimeter --> 3 Meter (Check conversion here)
Least Radius of Gyration: 47.02 Millimeter --> 0.04702 Meter (Check conversion here)
Column Cross Sectional Area: 1.4 Square Meter --> 1.4 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = (σ_c-(n*(L_eff/r_least)))*A_sectional --> (2827-(4*(3/0.04702)))*1.4

Evaluating ... ...

P = 3600.50523181625

STEP 3: Convert Result to Output's Unit

3600.50523181625 Newton -->3.60050523181625 Kilonewton (Check conversion here)

FINAL ANSWER

3.60050523181625 ≈ 3.600505 Kilonewton <-- Crippling Load

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Mechanical » Straight Line Formula » Crippling Load on Column by Straight-Line Formula

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Straight Line Formula Calculators

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration))

Cross-Sectional Area of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))

Compressive Yield Stress by Straight-Line Formula for Columns and Struts

LaTeX Go Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration))

Crippling Load on Column by Straight-Line Formula

LaTeX Go Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area

Crippling Load on Column by Straight-Line Formula Formula

LaTeX Go

Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area
P = (σ_c-(n*(L_eff/r_least)))*A_sectional

What is Slenderness Ratio in Column?

The slenderness ratio of a reinforced concrete (RC) column is the ratio between the length of the column, its lateral dimensions, and end fixity. The slenderness ratio is calculated by dividing the column length by its radius of gyration. The slenderness ratio differentiates the short column from the long or slender column.

How to Calculate Crippling Load on Column by Straight-Line Formula?

Crippling Load on Column by Straight-Line Formula calculator uses Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area to calculate the Crippling Load, Crippling Load on Column by Straight-Line Formula is defined as the maximum load that a column can withstand before it gets deformed or crushed, taking into account the effective length, least radius of gyration, and sectional area of the column, which is crucial in structural engineering and building design. Crippling Load is denoted by P symbol.

How to calculate Crippling Load on Column by Straight-Line Formula using this online calculator? To use this online calculator for Crippling Load on Column by Straight-Line Formula, enter Compressive Stress (σ_c), Straight Line Formula Constant (n), Effective Column Length (L_eff), Least Radius of Gyration (r_least) & Column Cross Sectional Area (A_sectional) and hit the calculate button. Here is how the Crippling Load on Column by Straight-Line Formula calculation can be explained with given input values -> 4.479643 = (2827-(4*(3/0.04702)))*1.4.

FAQ

What is Crippling Load on Column by Straight-Line Formula?

Crippling Load on Column by Straight-Line Formula is defined as the maximum load that a column can withstand before it gets deformed or crushed, taking into account the effective length, least radius of gyration, and sectional area of the column, which is crucial in structural engineering and building design and is represented as P = (σ_c-(n*(L_eff/r_least)))*A_sectional or Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area. Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material, Straight Line Formula Constant is defined as the constant that depends on the material of column, Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration, Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations & Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

How to calculate Crippling Load on Column by Straight-Line Formula?

Crippling Load on Column by Straight-Line Formula is defined as the maximum load that a column can withstand before it gets deformed or crushed, taking into account the effective length, least radius of gyration, and sectional area of the column, which is crucial in structural engineering and building design is calculated using Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area. To calculate Crippling Load on Column by Straight-Line Formula, you need Compressive Stress (σ_c), Straight Line Formula Constant (n), Effective Column Length (L_eff), Least Radius of Gyration (r_least) & Column Cross Sectional Area (A_sectional). With our tool, you need to enter the respective value for Compressive Stress, Straight Line Formula Constant, Effective Column Length, Least Radius of Gyration & Column Cross Sectional Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Crippling Load?

In this formula, Crippling Load uses Compressive Stress, Straight Line Formula Constant, Effective Column Length, Least Radius of Gyration & Column Cross Sectional Area. We can use 1 other way(s) to calculate the same, which is/are as follows -

Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Slenderness Ratio)))*Column Cross Sectional Area

Home

FREE PDFs

🔍 Search