Creep Coefficient in European Code Solution

STEP 0: Pre-Calculation Summary
Formula Used
Creep Coefficient = Total Strain/Instantaneous Strain
Φ = δt/δi
This formula uses 3 Variables
Variables Used
Creep Coefficient - Creep Coefficient is the ratio of Creep strain to elastic strain.
Total Strain - Total Strain is the strain caused due to long living load and impact load or termed as total of instantaneous and creep strain.
Instantaneous Strain - Instantaneous Strain is the strain caused immediately after the application of stress.
STEP 1: Convert Input(s) to Base Unit
Total Strain: 0.2 --> No Conversion Required
Instantaneous Strain: 0.125 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Φ = δti --> 0.2/0.125
Evaluating ... ...
Φ = 1.6
STEP 3: Convert Result to Output's Unit
1.6 --> No Conversion Required
FINAL ANSWER
1.6 <-- Creep Coefficient
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

Materials Calculators

Empirical Formula for Secant Modulus using ACI Code Provisions
​ LaTeX ​ Go Secant Modulus = Unit Weight of Material^1.5*33*sqrt(Cylinder Strength)
Creep Coefficient in European Code
​ LaTeX ​ Go Creep Coefficient = Total Strain/Instantaneous Strain
Empirical Formula for Secant Modulus Proposed by Jensen
​ LaTeX ​ Go Secant Modulus = (6*10^6)/(1+(2000/Cylinder Strength))
Empirical Formula for Secant Modulus Proposed by Hognestad in ACI Code
​ LaTeX ​ Go Secant Modulus = 1800000+(460*Cylinder Strength)

Creep Coefficient in European Code Formula

​LaTeX ​Go
Creep Coefficient = Total Strain/Instantaneous Strain
Φ = δt/δi

What is Creep?

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to move slowly or deform permanently under the influence of persistent mechanical stresses or time-dependent deformation due to sustained load.

Why does Concrete Creep Occur?

Creep is defined as the long term deformation under a sustained load. Water within the hardened cement paste is forced to more as a result of the applied load. This movement of moisture is the primary cause of creep deformation. Some movement also occurs due to the propagation of microcracks.

How to Calculate Creep Coefficient in European Code?

Creep Coefficient in European Code calculator uses Creep Coefficient = Total Strain/Instantaneous Strain to calculate the Creep Coefficient, The Creep Coefficient in European Code is defined as the ratio of total strain(instantaneous +creep strain) to the instantaneous strain. Creep Coefficient is denoted by Φ symbol.

How to calculate Creep Coefficient in European Code using this online calculator? To use this online calculator for Creep Coefficient in European Code, enter Total Strain t) & Instantaneous Strain i) and hit the calculate button. Here is how the Creep Coefficient in European Code calculation can be explained with given input values -> 2 = 0.2/0.125.

FAQ

What is Creep Coefficient in European Code?
The Creep Coefficient in European Code is defined as the ratio of total strain(instantaneous +creep strain) to the instantaneous strain and is represented as Φ = δti or Creep Coefficient = Total Strain/Instantaneous Strain. Total Strain is the strain caused due to long living load and impact load or termed as total of instantaneous and creep strain & Instantaneous Strain is the strain caused immediately after the application of stress.
How to calculate Creep Coefficient in European Code?
The Creep Coefficient in European Code is defined as the ratio of total strain(instantaneous +creep strain) to the instantaneous strain is calculated using Creep Coefficient = Total Strain/Instantaneous Strain. To calculate Creep Coefficient in European Code, you need Total Strain t) & Instantaneous Strain i). With our tool, you need to enter the respective value for Total Strain & Instantaneous Strain and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!