Cost of One Tool given Cutting Velocity Calculator

✖Machining And Operating Rate is the money charged for processing on and operating machines per unit time, including overheads for minimum production cost.ⓘ Machining And Operating Rate [M]			+10% -10%
✖Reference Tool Life is the Tool Life of the tool obtained in the reference machining condition.ⓘ Reference Tool Life [L_ref]			+10% -10%
✖Taylor's Tool Life Exponent For Hard Material is a parameter used in machining operations to describe the relationship between cutting speed and tool life.ⓘ Taylor's Tool Life Exponent For Hard Material [n_h]			+10% -10%
✖Reference Cutting Velocity is the Cutting Velocity of the tool used in the reference machining condition.ⓘ Reference Cutting Velocity [V_ref]			+10% -10%
✖The Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).ⓘ Cutting Velocity [V]			+10% -10%
✖Time to Change One Tool is the measure of time it takes to change one tool during machining.ⓘ Time to Change One Tool [t_c]			+10% -10%

✖Cost of A Tool is simply the cost of one tool being used for machining.ⓘ Cost of One Tool given Cutting Velocity [C_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Cost of One Tool given Cutting Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cost of A Tool = Machining And Operating Rate*((Reference Tool Life*(Taylor's Tool Life Exponent For Hard Material/(Taylor's Tool Life Exponent For Hard Material-1))*(Reference Cutting Velocity/Cutting Velocity)^(1/Taylor's Tool Life Exponent For Hard Material))-Time to Change One Tool)
C_t = M*((L_ref*(n_h/(n_h-1))*(V_ref/V)^(1/n_h))-t_c)
This formula uses 7 Variables

Variables Used

Cost of A Tool - Cost of A Tool is simply the cost of one tool being used for machining.
Machining And Operating Rate - Machining And Operating Rate is the money charged for processing on and operating machines per unit time, including overheads for minimum production cost.
Reference Tool Life - (Measured in Second) - Reference Tool Life is the Tool Life of the tool obtained in the reference machining condition.
Taylor's Tool Life Exponent For Hard Material - Taylor's Tool Life Exponent For Hard Material is a parameter used in machining operations to describe the relationship between cutting speed and tool life.
Reference Cutting Velocity - (Measured in Meter per Second) - Reference Cutting Velocity is the Cutting Velocity of the tool used in the reference machining condition.
Cutting Velocity - (Measured in Meter per Second) - The Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).
Time to Change One Tool - (Measured in Second) - Time to Change One Tool is the measure of time it takes to change one tool during machining.

STEP 1: Convert Input(s) to Base Unit

Machining And Operating Rate: 5 --> No Conversion Required
Reference Tool Life: 8400 Minute --> 504000 Second (Check conversion here)
Taylor's Tool Life Exponent For Hard Material: 1.55 --> No Conversion Required
Reference Cutting Velocity: 2.996056 Meter per Minute --> 0.0499342666666667 Meter per Second (Check conversion here)
Cutting Velocity: 420 Meter per Minute --> 7 Meter per Second (Check conversion here)
Time to Change One Tool: 0.9 Minute --> 54 Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_t = M*((L_ref*(n_h/(n_h-1))*(V_ref/V)^(1/n_h))-t_c) --> 5*((504000*(1.55/(1.55-1))*(0.0499342666666667/7)^(1/1.55))-54)

Evaluating ... ...

C_t = 292416.181007095

STEP 3: Convert Result to Output's Unit

292416.181007095 --> No Conversion Required

FINAL ANSWER

292416.181007095 ≈ 292416.2 <-- Cost of A Tool

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Metal Machining Economics » Production Cost » Minimum Production Cost » Cost of One Tool given Cutting Velocity

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< Minimum Production Cost Calculators

Machining and Operating Rate using Minimum Production Cost

LaTeX Go Machining And Operating Rate = (Cost of A Tool/((Reference Tool Life*(Taylor's Tool Life Exponent For Hard Material/(Taylor's Tool Life Exponent For Hard Material-1))*(Reference Cutting Velocity/Cutting Velocity)^(1/Taylor's Tool Life Exponent For Hard Material))-Time to Change One Tool))

Reference Cutting Velocity given Cutting Velocity

LaTeX Go Reference Cutting Velocity = Cutting Velocity/(((Taylor's Tool Life Exponent*Cost of A Tool*Reference Tool Life)/((1-Taylor's Tool Life Exponent)*(Cost of A Tool*Time to Change One Tool+Cost of A Tool)))^Taylor's Tool Life Exponent)

Reference Tool Life given Cutting Velocity

LaTeX Go Reference Tool Life = (Cutting Velocity/Reference Cutting Velocity)^(1/Taylor's Tool Life Exponent)*(1-Taylor's Tool Life Exponent)*(Cost of A Tool*Time to Change One Tool+Cost of A Tool)/(Taylor's Tool Life Exponent*Cost of A Tool)

Cutting Velocity for Minimum Production Cost

LaTeX Go Cutting Velocity = Reference Cutting Velocity*((Taylor's Tool Life Exponent*Cost of A Tool*Reference Tool Life)/((1-Taylor's Tool Life Exponent)*(Cost of A Tool*Time to Change One Tool+Cost of A Tool)))^Taylor's Tool Life Exponent

Cost of One Tool given Cutting Velocity Formula

LaTeX Go

Significance of Cost of Tools Used

The Cost of Tools Used helps us in determining the maximum number of times a tool can be renewed during the production of a given batch of products. This renewing might include buying or resharpening the tool. Thus if the number of Tools to be used gets bounded, the machining operation would have to be optimized in order to give sufficient tool life to minimize the Total Cost of Production.

How to Calculate Cost of One Tool given Cutting Velocity?

Cost of One Tool given Cutting Velocity calculator uses Cost of A Tool = Machining And Operating Rate*((Reference Tool Life*(Taylor's Tool Life Exponent For Hard Material/(Taylor's Tool Life Exponent For Hard Material-1))*(Reference Cutting Velocity/Cutting Velocity)^(1/Taylor's Tool Life Exponent For Hard Material))-Time to Change One Tool) to calculate the Cost of A Tool, The Cost of One Tool given Cutting Velocity is a method to determine the maximum amount available to be spent on renewing the Machining Tool for the production of a batch of components, such that the Total Production Cost is Minimum. Cost of A Tool is denoted by C_t symbol.

How to calculate Cost of One Tool given Cutting Velocity using this online calculator? To use this online calculator for Cost of One Tool given Cutting Velocity, enter Machining And Operating Rate (M), Reference Tool Life (L_ref), Taylor's Tool Life Exponent For Hard Material (n_h), Reference Cutting Velocity (V_ref), Cutting Velocity (V) & Time to Change One Tool (t_c) and hit the calculate button. Here is how the Cost of One Tool given Cutting Velocity calculation can be explained with given input values -> 292416.2 = 5*((504000*(1.55/(1.55-1))*(0.0499342666666667/7)^(1/1.55))-54).

FAQ

What is Cost of One Tool given Cutting Velocity?

The Cost of One Tool given Cutting Velocity is a method to determine the maximum amount available to be spent on renewing the Machining Tool for the production of a batch of components, such that the Total Production Cost is Minimum and is represented as C_t = M*((L_ref*(n_h/(n_h-1))*(V_ref/V)^(1/n_h))-t_c) or Cost of A Tool = Machining And Operating Rate*((Reference Tool Life*(Taylor's Tool Life Exponent For Hard Material/(Taylor's Tool Life Exponent For Hard Material-1))*(Reference Cutting Velocity/Cutting Velocity)^(1/Taylor's Tool Life Exponent For Hard Material))-Time to Change One Tool). Machining And Operating Rate is the money charged for processing on and operating machines per unit time, including overheads for minimum production cost, Reference Tool Life is the Tool Life of the tool obtained in the reference machining condition, Taylor's Tool Life Exponent For Hard Material is a parameter used in machining operations to describe the relationship between cutting speed and tool life, Reference Cutting Velocity is the Cutting Velocity of the tool used in the reference machining condition, The Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating) & Time to Change One Tool is the measure of time it takes to change one tool during machining.

How to calculate Cost of One Tool given Cutting Velocity?

The Cost of One Tool given Cutting Velocity is a method to determine the maximum amount available to be spent on renewing the Machining Tool for the production of a batch of components, such that the Total Production Cost is Minimum is calculated using Cost of A Tool = Machining And Operating Rate*((Reference Tool Life*(Taylor's Tool Life Exponent For Hard Material/(Taylor's Tool Life Exponent For Hard Material-1))*(Reference Cutting Velocity/Cutting Velocity)^(1/Taylor's Tool Life Exponent For Hard Material))-Time to Change One Tool). To calculate Cost of One Tool given Cutting Velocity, you need Machining And Operating Rate (M), Reference Tool Life (L_ref), Taylor's Tool Life Exponent For Hard Material (n_h), Reference Cutting Velocity (V_ref), Cutting Velocity (V) & Time to Change One Tool (t_c). With our tool, you need to enter the respective value for Machining And Operating Rate, Reference Tool Life, Taylor's Tool Life Exponent For Hard Material, Reference Cutting Velocity, Cutting Velocity & Time to Change One Tool and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Cost of A Tool?

In this formula, Cost of A Tool uses Machining And Operating Rate, Reference Tool Life, Taylor's Tool Life Exponent For Hard Material, Reference Cutting Velocity, Cutting Velocity & Time to Change One Tool. We can use 3 other way(s) to calculate the same, which is/are as follows -

Cost of A Tool = Machining And Operating Rate*Time to Change One Tool*((2*Taylor's Tool Life Exponent-1)/(1-Taylor's Tool Life Exponent))
Cost of A Tool = Machining And Operating Rate*((Reference Tool Life*(Taylor's Tool Life Exponent/(1-Taylor's Tool Life Exponent))*((Reference Cutting Velocity/Cutting Velocity)^(1/Taylor's Tool Life Exponent)))-Time to Change One Tool)
Cost of A Tool = Machining And Operating Rate*Time to Change One Tool*((2*Taylor's Tool Life Exponent-1)/(1-Taylor's Tool Life Exponent))

Home

FREE PDFs

🔍 Search