Correction to be Subtracted from Slope Distance given difference in Elevation Calculator

✖Difference in elevation is the vertical distance between two points, indicating how high or low one point is relative to the other.ⓘ Difference in Elevation [ΔH]			+10% -10%
✖Measured Length is the length measured from steel tape during observation.ⓘ Measured Length [s]			+10% -10%

✖Correction to be Subtracted is a value that needs to be subtracted from a measured quantity to obtain a more accurate result.ⓘ Correction to be Subtracted from Slope Distance given difference in Elevation [C]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Measurement of Distance with Tapes Formulas PDF PDF Image

Correction to be Subtracted from Slope Distance given difference in Elevation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Correction to be Subtracted = (Difference in Elevation)^2/(2*Measured Length)
C = (ΔH)^2/(2*s)
This formula uses 3 Variables

Variables Used

Correction to be Subtracted - (Measured in Meter) - Correction to be Subtracted is a value that needs to be subtracted from a measured quantity to obtain a more accurate result.
Difference in Elevation - (Measured in Meter) - Difference in elevation is the vertical distance between two points, indicating how high or low one point is relative to the other.
Measured Length - (Measured in Meter) - Measured Length is the length measured from steel tape during observation.

STEP 1: Convert Input(s) to Base Unit

Difference in Elevation: 15 Meter --> 15 Meter No Conversion Required
Measured Length: 10.993 Meter --> 10.993 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = (ΔH)^2/(2*s) --> (15)^2/(2*10.993)

Evaluating ... ...

C = 10.2337851359956

STEP 3: Convert Result to Output's Unit

10.2337851359956 Meter --> No Conversion Required

FINAL ANSWER

10.2337851359956 ≈ 10.23379 Meter <-- Correction to be Subtracted

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Surveying Formulas » Measurement of Distance with Tapes » Correction for Temperature and Measurements on Slope » Correction to be Subtracted from Slope Distance given difference in Elevation

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Himanshi Sharma

Bhilai Institute of Technology (BIT), Raipur

Himanshi Sharma has verified this Calculator and 800+ more calculators!

< Correction for Temperature and Measurements on Slope Calculators

Measured Length given Temperature Correction

LaTeX Go Measured Length = (Length Correction due to Temperature/(0.0000065*(Final Temperature-Initial Temperature)))

Measured Length given Correction to be Subtracted from Slope Distance

LaTeX Go Measured Length = (Correction to be Subtracted from Slope Distance/(1-cos(Slope Angle)))

Correction to be Subtracted from Slope Distance

LaTeX Go Correction to be Subtracted from Slope Distance = (Measured Length*(1-cos(Slope Angle)))

Temperature Correction to Measured Length

LaTeX Go Length Correction due to Temperature = (0.000065*(Final Temperature-Initial Temperature))

Correction to be Subtracted from Slope Distance given difference in Elevation Formula

LaTeX Go

Correction to be Subtracted = (Difference in Elevation)^2/(2*Measured Length)
C = (ΔH)^2/(2*s)

What is the Purpose of Correcting for Temperature in Survey Measurements?

The purpose of correcting for temperature in survey measurements is to compensate for the expansion or contraction of survey equipment due to temperature changes, which can affect the accuracy of measurements.

What is the Effect of Slope on Survey Measurements?

The effect of slope on survey measurements is that it can cause errors in distance and elevation measurements, especially if the slope is steep or uneven.

How to Calculate Correction to be Subtracted from Slope Distance given difference in Elevation?

Correction to be Subtracted from Slope Distance given difference in Elevation calculator uses Correction to be Subtracted = (Difference in Elevation)^2/(2*Measured Length) to calculate the Correction to be Subtracted, The Correction to be Subtracted from Slope Distance given difference in Elevation formula is defined by using difference in elevation at ends of measured length and measured length is taken into consideration. Correction to be Subtracted is denoted by C symbol.

How to calculate Correction to be Subtracted from Slope Distance given difference in Elevation using this online calculator? To use this online calculator for Correction to be Subtracted from Slope Distance given difference in Elevation, enter Difference in Elevation (ΔH) & Measured Length (s) and hit the calculate button. Here is how the Correction to be Subtracted from Slope Distance given difference in Elevation calculation can be explained with given input values -> 10.22727 = (15)^2/(2*10.993).

FAQ

What is Correction to be Subtracted from Slope Distance given difference in Elevation?

The Correction to be Subtracted from Slope Distance given difference in Elevation formula is defined by using difference in elevation at ends of measured length and measured length is taken into consideration and is represented as C = (ΔH)^2/(2*s) or Correction to be Subtracted = (Difference in Elevation)^2/(2*Measured Length). Difference in elevation is the vertical distance between two points, indicating how high or low one point is relative to the other & Measured Length is the length measured from steel tape during observation.

How to calculate Correction to be Subtracted from Slope Distance given difference in Elevation?

The Correction to be Subtracted from Slope Distance given difference in Elevation formula is defined by using difference in elevation at ends of measured length and measured length is taken into consideration is calculated using Correction to be Subtracted = (Difference in Elevation)^2/(2*Measured Length). To calculate Correction to be Subtracted from Slope Distance given difference in Elevation, you need Difference in Elevation (ΔH) & Measured Length (s). With our tool, you need to enter the respective value for Difference in Elevation & Measured Length and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search