Correction for Mutual Interference of Pile Calculator

✖Depth of pile effect is required on neighbor pile.ⓘ Depth of Pile Effect is Required on Neighbor Pile [D]			+10% -10%
✖Distance between the piles of two lines.ⓘ Distance Between the Piles [b^']			+10% -10%
✖Depth of pile on which effect on neighbor pile.ⓘ Depth of Pile on Which Effect on Neighbor Pile [d_pile]			+10% -10%
✖Total length of floor used for describing drapes that reach the floor.ⓘ Total Length of Floor [b]			+10% -10%

✖Correction to be applied as percentage of head.ⓘ Correction for Mutual Interference of Pile [C]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Irrigation Engineering Formula PDF PDF Image

Correction for Mutual Interference of Pile Solution

STEP 0: Pre-Calculation Summary

Formula Used

Correction to be Applied as Percentage of Head = 19*sqrt(Depth of Pile Effect is Required on Neighbor Pile/Distance Between the Piles)*((Depth of Pile on Which Effect on Neighbor Pile+Depth of Pile Effect is Required on Neighbor Pile)/Total Length of Floor)
C = 19*sqrt(D/b^')*((d_pile+D)/b)
This formula uses 1 Functions, 5 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Correction to be Applied as Percentage of Head - Correction to be applied as percentage of head.
Depth of Pile Effect is Required on Neighbor Pile - (Measured in Meter) - Depth of pile effect is required on neighbor pile.
Distance Between the Piles - (Measured in Meter) - Distance between the piles of two lines.
Depth of Pile on Which Effect on Neighbor Pile - (Measured in Meter) - Depth of pile on which effect on neighbor pile.
Total Length of Floor - (Measured in Meter) - Total length of floor used for describing drapes that reach the floor.

STEP 1: Convert Input(s) to Base Unit

Depth of Pile Effect is Required on Neighbor Pile: 7 Meter --> 7 Meter No Conversion Required
Distance Between the Piles: 15.8 Meter --> 15.8 Meter No Conversion Required
Depth of Pile on Which Effect on Neighbor Pile: 3.5 Meter --> 3.5 Meter No Conversion Required
Total Length of Floor: 57 Meter --> 57 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = 19*sqrt(D/b^')*((d_pile+D)/b) --> 19*sqrt(7/15.8)*((3.5+7)/57)

Evaluating ... ...

C = 2.32963842470745

STEP 3: Convert Result to Output's Unit

2.32963842470745 --> No Conversion Required

FINAL ANSWER

2.32963842470745 ≈ 2.329638 <-- Correction to be Applied as Percentage of Head

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Irrigation Engineering » Canal Head Works and Method of Irrigation » Khosla's Theory » Correction for Mutual Interference of Pile

Credits

Created by bhuvaneshwari

Coorg institute of technology (CIT), Kodagu

bhuvaneshwari has created this Calculator and 50+ more calculators!

Verified by Ayush Singh

Gautam Buddha University (GBU), Greater Noida

Ayush Singh has verified this Calculator and 100+ more calculators!

< Khosla's Theory Calculators

Correction for Mutual Interference of Pile

LaTeX Go Correction to be Applied as Percentage of Head = 19*sqrt(Depth of Pile Effect is Required on Neighbor Pile/Distance Between the Piles)*((Depth of Pile on Which Effect on Neighbor Pile+Depth of Pile Effect is Required on Neighbor Pile)/Total Length of Floor)

Khosla Derived Expression for Exit Gradient

LaTeX Go Exit Gradient = (Total Seepage Head/Depth of Floor)*(1/(3.14*sqrt(Constant Value for Exit Gradient)))

Correction for Mutual Interference of Pile Formula

LaTeX Go

What is Khosla's Theory?

The Khosla's Theory states that seepage of water does not creep along the bottom contour. It moves along a set of streamlines. In order to calculate the uplift pressure and exit gradient theory takes into account the flow pattern impermeable base of hydraulic structure.

How to Calculate Correction for Mutual Interference of Pile?

Correction for Mutual Interference of Pile calculator uses Correction to be Applied as Percentage of Head = 19*sqrt(Depth of Pile Effect is Required on Neighbor Pile/Distance Between the Piles)*((Depth of Pile on Which Effect on Neighbor Pile+Depth of Pile Effect is Required on Neighbor Pile)/Total Length of Floor) to calculate the Correction to be Applied as Percentage of Head, The Correction for Mutual Interference of Pile formula is defined as this correction is positive when the point is considered to be at the rear of the interfering pile and negative for points considered in the forward or flow direction with the interfering pile. Correction to be Applied as Percentage of Head is denoted by C symbol.

How to calculate Correction for Mutual Interference of Pile using this online calculator? To use this online calculator for Correction for Mutual Interference of Pile, enter Depth of Pile Effect is Required on Neighbor Pile (D), Distance Between the Piles (b^'), Depth of Pile on Which Effect on Neighbor Pile (d_pile) & Total Length of Floor (b) and hit the calculate button. Here is how the Correction for Mutual Interference of Pile calculation can be explained with given input values -> 2.329638 = 19*sqrt(7/15.8)*((3.5+7)/57).

FAQ

What is Correction for Mutual Interference of Pile?

The Correction for Mutual Interference of Pile formula is defined as this correction is positive when the point is considered to be at the rear of the interfering pile and negative for points considered in the forward or flow direction with the interfering pile and is represented as C = 19*sqrt(D/b^')*((d_pile+D)/b) or Correction to be Applied as Percentage of Head = 19*sqrt(Depth of Pile Effect is Required on Neighbor Pile/Distance Between the Piles)*((Depth of Pile on Which Effect on Neighbor Pile+Depth of Pile Effect is Required on Neighbor Pile)/Total Length of Floor). Depth of pile effect is required on neighbor pile, Distance between the piles of two lines, Depth of pile on which effect on neighbor pile & Total length of floor used for describing drapes that reach the floor.

How to calculate Correction for Mutual Interference of Pile?

The Correction for Mutual Interference of Pile formula is defined as this correction is positive when the point is considered to be at the rear of the interfering pile and negative for points considered in the forward or flow direction with the interfering pile is calculated using Correction to be Applied as Percentage of Head = 19*sqrt(Depth of Pile Effect is Required on Neighbor Pile/Distance Between the Piles)*((Depth of Pile on Which Effect on Neighbor Pile+Depth of Pile Effect is Required on Neighbor Pile)/Total Length of Floor). To calculate Correction for Mutual Interference of Pile, you need Depth of Pile Effect is Required on Neighbor Pile (D), Distance Between the Piles (b^'), Depth of Pile on Which Effect on Neighbor Pile (d_pile) & Total Length of Floor (b). With our tool, you need to enter the respective value for Depth of Pile Effect is Required on Neighbor Pile, Distance Between the Piles, Depth of Pile on Which Effect on Neighbor Pile & Total Length of Floor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search