Correction Factor for Industrial Services given Number of Belts Required Calculator

✖Number of Belts is the number of belts that are required for a given application.ⓘ Number of Belts [N]			+10% -10%
✖Correction Factor for Belt Length is the factor of correction for the belt length.ⓘ Correction Factor for Belt Length [F_cr]			+10% -10%
✖Correction Factor for Arc of Contact is the factor of correction for the arc of contact.ⓘ Correction Factor for Arc of Contact [F_dr]			+10% -10%
✖Power Rating of Single V-Belt is the power rating given to the single V-Belt.ⓘ Power Rating of Single V-Belt [P_r]			+10% -10%
✖Power Transmitted by Belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.ⓘ Power Transmitted by Belt [P_t]			+10% -10%

✖Correction Factor for Industrial Service is the correction factor that is used for industrial purpose.ⓘ Correction Factor for Industrial Services given Number of Belts Required [F_ar]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Belt Drives Formulas PDF PDF Image

Correction Factor for Industrial Services given Number of Belts Required Solution

STEP 0: Pre-Calculation Summary

Formula Used

Correction Factor for Industrial Service = Number of Belts*(Correction Factor for Belt Length*Correction Factor for Arc of Contact*Power Rating of Single V-Belt)/Power Transmitted by Belt
F_ar = N*(F_cr*F_dr*P_r)/P_t
This formula uses 6 Variables

Variables Used

Correction Factor for Industrial Service - Correction Factor for Industrial Service is the correction factor that is used for industrial purpose.
Number of Belts - Number of Belts is the number of belts that are required for a given application.
Correction Factor for Belt Length - Correction Factor for Belt Length is the factor of correction for the belt length.
Correction Factor for Arc of Contact - Correction Factor for Arc of Contact is the factor of correction for the arc of contact.
Power Rating of Single V-Belt - (Measured in Watt) - Power Rating of Single V-Belt is the power rating given to the single V-Belt.
Power Transmitted by Belt - (Measured in Watt) - Power Transmitted by Belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.

STEP 1: Convert Input(s) to Base Unit

Number of Belts: 2 --> No Conversion Required
Correction Factor for Belt Length: 1.08 --> No Conversion Required
Correction Factor for Arc of Contact: 0.94 --> No Conversion Required
Power Rating of Single V-Belt: 4.128 Kilowatt --> 4128 Watt (Check conversion here)
Power Transmitted by Belt: 6.45 Kilowatt --> 6450 Watt (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_ar = N*(F_cr*F_dr*P_r)/P_t --> 2*(1.08*0.94*4128)/6450

Evaluating ... ...

F_ar = 1.299456

STEP 3: Convert Result to Output's Unit

1.299456 --> No Conversion Required

FINAL ANSWER

1.299456 <-- Correction Factor for Industrial Service

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Belt Drives » V Belt Drives » V Belt Characteristics and Parameters » Correction Factor for Industrial Services given Number of Belts Required

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< V Belt Characteristics and Parameters Calculators

Belt Velocity of V-Belt given Belt Tension in Loose Side

LaTeX Go Belt Velocity = sqrt((Belt Tension on Tight Side-(e^(Coefficient of Friction for Belt Drive*Wrap Angle on Pulley/sin(V Belt Angle/2)))*Belt Tension on Loose Side)/(Mass of Meter Length of V Belt*(1-(e^(Coefficient of Friction for Belt Drive*Wrap Angle on Pulley/sin(V Belt Angle/2))))))

Angle of Wrap of V-Belt given Belt Tension in Loose Side of Belt

LaTeX Go Wrap Angle on Pulley = sin(V Belt Angle/2)*ln((Belt Tension on Tight Side-Mass of Meter Length of V Belt*Belt Velocity^2)/(Belt Tension on Loose Side-Mass of Meter Length of V Belt*Belt Velocity^2))/Coefficient of Friction for Belt Drive

Belt Tension in Loose Side of V-Belt

LaTeX Go Belt Tension on Loose Side = (Belt Tension on Tight Side-Mass of Meter Length of V Belt*Belt Velocity^2)/(e^Coefficient of Friction for Belt Drive*Wrap Angle on Pulley/sin(V Belt Angle/2))+Mass of Meter Length of V Belt*Belt Velocity^2

Belt Tension in Tight Side of V-Belt

LaTeX Go Belt Tension on Tight Side = (e^Coefficient of Friction for Belt Drive*Wrap Angle on Pulley/sin(V Belt Angle/2))*(Belt Tension on Loose Side-Mass of Meter Length of V Belt*Belt Velocity^2)+Mass of Meter Length of V Belt*Belt Velocity^2

Correction Factor for Industrial Services given Number of Belts Required Formula

LaTeX Go

Define Belt?

A belt is a loop of flexible material used to link two or more rotating shafts mechanically, most often parallel. Belts may be used as a source of motion, to transmit power efficiently or to track relative movement.

How to Calculate Correction Factor for Industrial Services given Number of Belts Required?

Correction Factor for Industrial Services given Number of Belts Required calculator uses Correction Factor for Industrial Service = Number of Belts*(Correction Factor for Belt Length*Correction Factor for Arc of Contact*Power Rating of Single V-Belt)/Power Transmitted by Belt to calculate the Correction Factor for Industrial Service, The Correction Factor for Industrial Services given Number of Belts Required formula is defined as a method to adjust the performance parameters of belt drives based on the number of belts used, ensuring optimal efficiency and reliability in mechanical systems. Correction Factor for Industrial Service is denoted by F_ar symbol.

How to calculate Correction Factor for Industrial Services given Number of Belts Required using this online calculator? To use this online calculator for Correction Factor for Industrial Services given Number of Belts Required, enter Number of Belts (N), Correction Factor for Belt Length (F_cr), Correction Factor for Arc of Contact (F_dr), Power Rating of Single V-Belt (P_r) & Power Transmitted by Belt (P_t) and hit the calculate button. Here is how the Correction Factor for Industrial Services given Number of Belts Required calculation can be explained with given input values -> 1.299456 = 2*(1.08*0.94*4128)/6450.

FAQ

What is Correction Factor for Industrial Services given Number of Belts Required?

The Correction Factor for Industrial Services given Number of Belts Required formula is defined as a method to adjust the performance parameters of belt drives based on the number of belts used, ensuring optimal efficiency and reliability in mechanical systems and is represented as F_ar = N*(F_cr*F_dr*P_r)/P_t or Correction Factor for Industrial Service = Number of Belts*(Correction Factor for Belt Length*Correction Factor for Arc of Contact*Power Rating of Single V-Belt)/Power Transmitted by Belt. Number of Belts is the number of belts that are required for a given application, Correction Factor for Belt Length is the factor of correction for the belt length, Correction Factor for Arc of Contact is the factor of correction for the arc of contact, Power Rating of Single V-Belt is the power rating given to the single V-Belt & Power Transmitted by Belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.

How to calculate Correction Factor for Industrial Services given Number of Belts Required?

The Correction Factor for Industrial Services given Number of Belts Required formula is defined as a method to adjust the performance parameters of belt drives based on the number of belts used, ensuring optimal efficiency and reliability in mechanical systems is calculated using Correction Factor for Industrial Service = Number of Belts*(Correction Factor for Belt Length*Correction Factor for Arc of Contact*Power Rating of Single V-Belt)/Power Transmitted by Belt. To calculate Correction Factor for Industrial Services given Number of Belts Required, you need Number of Belts (N), Correction Factor for Belt Length (F_cr), Correction Factor for Arc of Contact (F_dr), Power Rating of Single V-Belt (P_r) & Power Transmitted by Belt (P_t). With our tool, you need to enter the respective value for Number of Belts, Correction Factor for Belt Length, Correction Factor for Arc of Contact, Power Rating of Single V-Belt & Power Transmitted by Belt and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search