Pole Frequency of STC Circuit Solution

STEP 0: Pre-Calculation Summary
Formula Used
Pole Frequency of STC Filter = 1/(Input Capacitance*Signal Resistance)
fstc = 1/(Cin*Rsig)
This formula uses 3 Variables
Variables Used
Pole Frequency of STC Filter - (Measured in Hertz) - The pole frequency of STC filter represents the frequency at which the output amplitude drops to -3 decibels and indicates its ability to attenuate signals beyond that point in a circuit.
Input Capacitance - (Measured in Farad) - Input capacitance is the capacitance value of the voltage amplifier.
Signal Resistance - (Measured in Ohm) - Signal Resistance is the resistance which is fed with the signal voltage source to an amplifier.
STEP 1: Convert Input(s) to Base Unit
Input Capacitance: 200 Microfarad --> 0.0002 Farad (Check conversion ​here)
Signal Resistance: 1.2 Kilohm --> 1200 Ohm (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
fstc = 1/(Cin*Rsig) --> 1/(0.0002*1200)
Evaluating ... ...
fstc = 4.16666666666667
STEP 3: Convert Result to Output's Unit
4.16666666666667 Hertz --> No Conversion Required
FINAL ANSWER
4.16666666666667 4.166667 Hertz <-- Pole Frequency of STC Filter
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

STC Network Calculators

Input Capacitance of STC Circuit
​ LaTeX ​ Go Input Capacitance of STC = Total Capacitance+Gate to Source Capacitance
Input Capacitance with reference to Corner Frequency
​ LaTeX ​ Go Input Capacitance = 1/(Pole Frequency of STC Filter*Signal Resistance)
Pole Frequency of STC Circuit
​ LaTeX ​ Go Pole Frequency of STC Filter = 1/(Input Capacitance*Signal Resistance)
Pole Frequency of STC Networks for Low-Pass
​ LaTeX ​ Go Pole Frequency Low Pass = 1/Time Constant

Pole Frequency of STC Circuit Formula

​LaTeX ​Go
Pole Frequency of STC Filter = 1/(Input Capacitance*Signal Resistance)
fstc = 1/(Cin*Rsig)

What determines cut off frequency?

The frequency point at which the capacitive reactance and resistance are equal, then it is known as the cutoff frequency of a low pass filter. At cutoff frequency, the output signal is attenuated to 70.7% of the input signal value or -3db of the input.

How to Calculate Pole Frequency of STC Circuit?

Pole Frequency of STC Circuit calculator uses Pole Frequency of STC Filter = 1/(Input Capacitance*Signal Resistance) to calculate the Pole Frequency of STC Filter, Pole Frequency of STC Circuit formula is defined as the frequency either above or below which the power output of a circuit, such as a line, amplifier, or electronic filter has fallen to a given proportion of the power in the passband. Pole Frequency of STC Filter is denoted by fstc symbol.

How to calculate Pole Frequency of STC Circuit using this online calculator? To use this online calculator for Pole Frequency of STC Circuit, enter Input Capacitance (Cin) & Signal Resistance (Rsig) and hit the calculate button. Here is how the Pole Frequency of STC Circuit calculation can be explained with given input values -> 4.166667 = 1/(0.0002*1200).

FAQ

What is Pole Frequency of STC Circuit?
Pole Frequency of STC Circuit formula is defined as the frequency either above or below which the power output of a circuit, such as a line, amplifier, or electronic filter has fallen to a given proportion of the power in the passband and is represented as fstc = 1/(Cin*Rsig) or Pole Frequency of STC Filter = 1/(Input Capacitance*Signal Resistance). Input capacitance is the capacitance value of the voltage amplifier & Signal Resistance is the resistance which is fed with the signal voltage source to an amplifier.
How to calculate Pole Frequency of STC Circuit?
Pole Frequency of STC Circuit formula is defined as the frequency either above or below which the power output of a circuit, such as a line, amplifier, or electronic filter has fallen to a given proportion of the power in the passband is calculated using Pole Frequency of STC Filter = 1/(Input Capacitance*Signal Resistance). To calculate Pole Frequency of STC Circuit, you need Input Capacitance (Cin) & Signal Resistance (Rsig). With our tool, you need to enter the respective value for Input Capacitance & Signal Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!