Core Diameter of Screw given Unit Bearing Pressure Calculator

✖Nominal diameter of screw is defined as the diameter of the cylinder touching the external threads of the screw.ⓘ Nominal diameter of screw [d]			+10% -10%
✖Axial load on screw is the instantaneous load applied to the screw along its axis.ⓘ Axial load on screw [W_a]			+10% -10%
✖Unit bearing pressure for nut is the average pressure acting on the contact surface of the thread in a Screw-Nut pair.ⓘ Unit bearing pressure for nut [S_b]			+10% -10%
✖A number of Engaged Threads of a screw/bolt are the count of threads of the screw/bolt that are currently in engagement with the nut.ⓘ Number of Engaged Threads [z]			+10% -10%

✖Core diameter of screw is defined as the smallest diameter of the thread of the screw or nut. The term “minor diameter” replaces the term “core diameter” as applied to the thread of a screw.ⓘ Core Diameter of Screw given Unit Bearing Pressure [d_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power Screws Formulas PDF PDF Image

Core Diameter of Screw given Unit Bearing Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Core diameter of screw = sqrt((Nominal diameter of screw)^2-(4*Axial load on screw/(Unit bearing pressure for nut*pi*Number of Engaged Threads)))
d_c = sqrt((d)^2-(4*W_a/(S_b*pi*z)))
This formula uses 1 Constants, 1 Functions, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Core diameter of screw - (Measured in Meter) - Core diameter of screw is defined as the smallest diameter of the thread of the screw or nut. The term “minor diameter” replaces the term “core diameter” as applied to the thread of a screw.
Nominal diameter of screw - (Measured in Meter) - Nominal diameter of screw is defined as the diameter of the cylinder touching the external threads of the screw.
Axial load on screw - (Measured in Newton) - Axial load on screw is the instantaneous load applied to the screw along its axis.
Unit bearing pressure for nut - (Measured in Pascal) - Unit bearing pressure for nut is the average pressure acting on the contact surface of the thread in a Screw-Nut pair.
Number of Engaged Threads - A number of Engaged Threads of a screw/bolt are the count of threads of the screw/bolt that are currently in engagement with the nut.

STEP 1: Convert Input(s) to Base Unit

Nominal diameter of screw: 50 Millimeter --> 0.05 Meter (Check conversion here)
Axial load on screw: 131000 Newton --> 131000 Newton No Conversion Required
Unit bearing pressure for nut: 24.9 Newton per Square Millimeter --> 24900000 Pascal (Check conversion here)
Number of Engaged Threads: 9 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_c = sqrt((d)^2-(4*W_a/(S_b*pi*z))) --> sqrt((0.05)^2-(4*131000/(24900000*pi*9)))

Evaluating ... ...

d_c = 0.0419012470082511

STEP 3: Convert Result to Output's Unit

0.0419012470082511 Meter -->41.9012470082511 Millimeter (Check conversion here)

FINAL ANSWER

41.9012470082511 ≈ 41.90125 Millimeter <-- Core diameter of screw

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Power Screws » Design of Screw and Nut » Core Diameter of Screw given Unit Bearing Pressure

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Design of Screw and Nut Calculators

Mean Diameter of Power Screw

LaTeX Go Mean Diameter of Power Screw = Nominal diameter of screw-0.5*Pitch of power screw thread

Nominal Diameter of Power Screw

LaTeX Go Nominal diameter of screw = Core diameter of screw+Pitch of power screw thread

Core Diameter of Power Screw

LaTeX Go Core diameter of screw = Nominal diameter of screw-Pitch of power screw thread

Pitch of Power Screw

LaTeX Go Pitch of power screw thread = Nominal diameter of screw-Core diameter of screw

Core Diameter of Screw given Unit Bearing Pressure Formula

LaTeX Go

Core diameter of screw = sqrt((Nominal diameter of screw)^2-(4*Axial load on screw/(Unit bearing pressure for nut*pi*Number of Engaged Threads)))
d_c = sqrt((d)^2-(4*W_a/(S_b*pi*z)))

Define core diameter?

The smallest diameter of the thread of the screw or nut. The term “minor diameter” replaces the term “core diameter” as applied to the thread of a screw and also the term “inside diameter” as applied to the thread of a nut.

How to Calculate Core Diameter of Screw given Unit Bearing Pressure?

Core Diameter of Screw given Unit Bearing Pressure calculator uses Core diameter of screw = sqrt((Nominal diameter of screw)^2-(4*Axial load on screw/(Unit bearing pressure for nut*pi*Number of Engaged Threads))) to calculate the Core diameter of screw, Core Diameter of Screw given Unit Bearing Pressure is defined as the smallest diameter of the thread of the screw or nut. The term “minor diameter” replaces the term “core diameter” as applied to the thread of a screw. Core diameter of screw is denoted by d_c symbol.

How to calculate Core Diameter of Screw given Unit Bearing Pressure using this online calculator? To use this online calculator for Core Diameter of Screw given Unit Bearing Pressure, enter Nominal diameter of screw (d), Axial load on screw (W_a), Unit bearing pressure for nut (S_b) & Number of Engaged Threads (z) and hit the calculate button. Here is how the Core Diameter of Screw given Unit Bearing Pressure calculation can be explained with given input values -> 41901.25 = sqrt((0.05)^2-(4*131000/(24900000*pi*9))).

FAQ

What is Core Diameter of Screw given Unit Bearing Pressure?

Core Diameter of Screw given Unit Bearing Pressure is defined as the smallest diameter of the thread of the screw or nut. The term “minor diameter” replaces the term “core diameter” as applied to the thread of a screw and is represented as d_c = sqrt((d)^2-(4*W_a/(S_b*pi*z))) or Core diameter of screw = sqrt((Nominal diameter of screw)^2-(4*Axial load on screw/(Unit bearing pressure for nut*pi*Number of Engaged Threads))). Nominal diameter of screw is defined as the diameter of the cylinder touching the external threads of the screw, Axial load on screw is the instantaneous load applied to the screw along its axis, Unit bearing pressure for nut is the average pressure acting on the contact surface of the thread in a Screw-Nut pair & A number of Engaged Threads of a screw/bolt are the count of threads of the screw/bolt that are currently in engagement with the nut.

How to calculate Core Diameter of Screw given Unit Bearing Pressure?

Core Diameter of Screw given Unit Bearing Pressure is defined as the smallest diameter of the thread of the screw or nut. The term “minor diameter” replaces the term “core diameter” as applied to the thread of a screw is calculated using Core diameter of screw = sqrt((Nominal diameter of screw)^2-(4*Axial load on screw/(Unit bearing pressure for nut*pi*Number of Engaged Threads))). To calculate Core Diameter of Screw given Unit Bearing Pressure, you need Nominal diameter of screw (d), Axial load on screw (W_a), Unit bearing pressure for nut (S_b) & Number of Engaged Threads (z). With our tool, you need to enter the respective value for Nominal diameter of screw, Axial load on screw, Unit bearing pressure for nut & Number of Engaged Threads and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Core diameter of screw?

In this formula, Core diameter of screw uses Nominal diameter of screw, Axial load on screw, Unit bearing pressure for nut & Number of Engaged Threads. We can use 3 other way(s) to calculate the same, which is/are as follows -

Core diameter of screw = Nominal diameter of screw-Pitch of power screw thread
Core diameter of screw = sqrt((4*Axial load on screw)/(pi*Compressive stress in screw))
Core diameter of screw = (16*Torsional Moment on Screw/(pi*Torsional shear stress in screw))^(1/3)

Home

FREE PDFs

🔍 Search